Baumer OPDM 16P5102 10239621 is a retro-reflective laser sensor equipped with a pulsed red laser diode. It boasts an actual range of 11 m and a nominal range of 12 m, with repeat accuracy of 1.5 mm at distances up to 0.5 m. This sensor features a polarization filter and a flashing light indicator for alignment or soiled lens detection, along with a yellow LED light indicator. It does not allow for sensitivity adjustment. The sensor operates within a laser class 1 safety rating and has a focus distance of 400 mm, with a wavelength of 650 nm. Its response time is less than 0.1 ms. The voltage supply range is 10 to 30 VDC, with a typical current consumption of 60 mA and a maximum of 70 mA. It features a PNP output circuit with light/dark operate functionality, capable of handling an output current of 200 mA. Safety features include short circuit and reverse polarity protection. The sensor's dimensions are 15.4 mm in width, 50 mm in height and depth, with a rectangular, die-cast zinc housing and glass optics. It includes a 4-pin, 2 m cable connection and operates in temperatures ranging from -10 to +50 °C. The sensor is IP 67 rated, indicating a high level of protection against dust and water ingress.
- Type:
- Retro-reflective laser sensor
- Light source:
- Pulsed red laser diode
- Actual range Sb:
- 11 m
- Nominal range Sn:
- 12 m
- Repeat accuracy:
- 1.5 mm at 0 ... 0,5 m
- Polarization filter:
- Yes
- Alignment / soiled lens indicator:
- Flashing light indicator
- Light indicator:
- LED yellow
- Sensitivity adjustment:
- No
- Laser class:
- 1
- Distance to focus:
- 400 mm
- Wave length:
- 650 nm
- Response time / release time:
- < 0.1 ms
- Voltage supply range +Vs:
- 10 30 VDC
- Current consumption max. (no load):
- 70 mA
- Current consumption typ.:
- 60 mA
- Voltage drop Vd:
- <2 VDC
- Output function:
- Light / dark operate
- Output circuit:
- PNP
- Output current:
- 200 mA
- Short circuit protection:
- Yes
- Reverse polarity protection:
- Yes
- Width / diameter:
- 15.4 mm
- Height / length:
- 50 mm
- Depth:
- 50 mm
- Design:
- Rectangular
- Housing material:
- Die-cast zinc
- Front (optics):
- Glass
- Connection types:
- Cable 4 pin, 2 m
- Operating temperature:
- -10 +50 °C
- Protection class:
- IP 67
- Datasheet:
- View
