Baumer OR18.EI-NW1Z.71CV 11157815 is a through beam sensor designed as a receiver with an actual range of 13 m and a nominal range of 20 m. It features a green LED for alignment or soiled lens indication and a yellow LED as an output indicator. This model does not allow for sensitivity adjustment and offers a quick response and release time of less than 2 ms. It operates on a voltage supply range of 12 to 30 VDC, with a typical current consumption of 30 mA and a maximum of 40 mA. The voltage drop is less than 2 VDC. It supports both light and dark operating modes with an NPN output circuit and can handle an output current of 100 mA. Equipped with short circuit and reverse polarity protection, this sensor has a cylindrical threaded design with dimensions of 18 mm in width/diameter and 44.8 mm in height/length. The housing is made of ABS TERLURAN plastic, and the front optics are PMMA. It connects via a 4-pin, 2 m cable and operates within a temperature range of -25 to +55 °C. The sensor is rated IP 67 for protection against dust and immersion.
- Type:
- Through beam sensor
- Emitter / receiver:
- Receiver
- Actual range Sb:
- 13 m
- Nominal range Sn:
- 20 m
- Alignment / soiled lens indicator:
- LED green
- Output indicator:
- LED yellow
- Sensitivity adjustment:
- No
- Response time / release time:
- < 2 ms
- Voltage supply range +Vs:
- 12 30 VDC
- Current consumption max. (no load):
- 40 mA
- Current consumption typ.:
- 30 mA
- Voltage drop Vd:
- <2 VDC
- Output function:
- Light / dark operate
- Output circuit:
- NPN
- Output current:
- 100 mA
- Short circuit protection:
- Yes
- Reverse polarity protection:
- Yes
- Width / diameter:
- 18 mm
- Height / length:
- 44.8 mm
- Design:
- Cylindrical threaded
- Housing material:
- Plastic (ABS TERLURAN)
- Front (optics):
- PMMA
- Connection types:
- Cable 4 pin, 2 m
- Operating temperature:
- -25 +55 °C
- Protection class:
- IP 67
- Datasheet:
- View
