Datasensing FAI4/BN-0E Sensors

The Datasensing FAI4/BN-0E Sensors offer a comprehensive range of M18 sensors designed for optimal performance with a 10...30 Vdc power supply. These sensors feature both axial and radial optics with a flat surface, making them versatile for various applications. The retro-reflective models are specifically engineered for detecting transparent objects, utilizing a red emission and boasting an IP67 protection degree for robust durability. Available in both metallic and plastic housings, these sensors provide flexibility in installation environments. Each model includes sensitivity adjustment via a trimmer, ensuring precise detection capabilities. The sensors operate on a diffuse reflection principle, ideal for short distances up to 200mm, with a nominal sensing distance of 200mm. They maintain a repeat accuracy of 5% and a thermal drift of Sr at ?10% Sr, ensuring reliable performance. The optic position is axial, and the output type is NPN NO+NC, offering both normally open and normally closed functions. With a switching frequency of 250Hz and a response time of just 2ms, these sensors are designed for rapid and accurate detection. They operate efficiently within a voltage range of 10…30VDC, with a no-load supply current of ? 30mA and a load current of ?100mA. The sensors are equipped with short-circuit protection, overvoltage, and reverse polarity protection, ensuring total protection against any type of electric damages. The LED indicators provide clear status updates, with a yellow light indicating Lon or output status Lo/Do. The sensors are designed to withstand external light interference up to 3000lux from incandescent lamps and 10000lux from sunlight. Constructed with a PBT/PC plug housing and a PC active head material, these sensors are lightweight at 30g and have a tightening torque of 1Nm. Operating within a temperature range of -25°C to +70°C without freezing, the sensors are built to endure harsh conditions. They are CE and cULus listed, ensuring compliance with international standards, and are EMC compatible with EN 60947-5-2. The sensors are also resistant to shocks and vibrations, adhering to Vibration IEC 60068-2-6 and Shock IEC 60068-2-27 standards. Supplied with M18 x 1 nuts and a screwdriver, these sensors are ready for immediate installation and use.