Datasensing NX16SR/XCP-A010 Sensors
Datasensing
$202.82
The Datasensing NX16SR/XCP-A010 Sensors offer a comprehensive area sensor kit designed for precision and reliability. Featuring 16 beams with an axial configuration, this kit provides a nominal sensing distance ranging from 0.5 to 2 meters, ensuring accurate detection with a beam spacing of 10mm. The controlled height of 150mm and a minimum detectable object size of 5mm make it ideal for various applications. The sensors operate with a PNP NC output function and a switching frequency of 130Hz, ensuring quick response times. The no-load supply current is 150mA for the emitter and 25mA for the receiver, with a load current capacity of 100mA. The sensors maintain a low leakage current of less than 10A at 26V and an output voltage drop of ?2V at 100mA. They are equipped with LED indicators for easy status monitoring: a yellow LED for power ON and emission active on the emitter, and red and yellow LEDs for signal level and output state active on the receiver. The sensors emit infrared light at 880nm and are resistant to external light interference up to 1000lux for incandescent light and 1500lux for sunlight. Connections are facilitated through PCB connectors, with specific MOLEX configurations for both the emitter and receiver. The compact dimensions of 157x36x18 make it easy to integrate into various setups, although mechanical protection is not defined.
- Nominal sensing distance:
- 0,5 2m
- Beams space:
- 10mm
- controlled height:
- 150mm
- minimum detectable object:
- Ø 5mm
- Output Function:
- NC
- Switching frequency:
- 130Hz
- No-Load supply current:
- 150mA (emitter) - 25mA (receiver)
- Load current:
- 100mA
- Leakage current:
- < 10µA @ 26V
- Output voltage drop:
- ?2V@100mA
- Max ripple content:
- 10%
- LED indicators:
- emitter: yellow (poweON and emission active) - receiver: red (signal level) - yellow (output state active)
- Emission:
- Infrared (880nm)
- Interference to external light:
- 1000lux (incandescent light) - 1500lux (sunlight)
- Connections:
- With PCB connectors / Emitter, Conn. 3 MOLEX 22-05-7038 - Positive, Check, Common / Receiver, Conn. 1 MOLEX 22-05-7038 - Positive, Check, Common / Receiver, Conn. 2 MOLEX 22-05-7048 Positive, Check, Output, Common
- Dimensions:
- 157x36x18
- Mechanical Protection:
- Not defined
