Datasensing QXP/C0-1E Sensors

The Datasensing QXP/C0-1E Sensors are advanced photoelectric sensors designed for precision and reliability. Featuring axial and right-angle optics, these sensors are equipped with two LEDs for threshold and signal margin indication. They utilize visible red light in retro-reflective, polarized, and through-beam models, allowing for long-distance detection with a precision beam. With a fast response time of 0.75-0.5 ms and NPN-PNP selectable output, these sensors offer high output current exceeding 300 mA. The nominal sensing distance is 3 meters, with a repeat accuracy of ? 5% and sensitivity adjustment via a trimmer. The sensors operate on a polarized function principle with an axial optic position and an NPN/PNP selectable NC output type. They feature a switching frequency of 750Hz and a response time of 666µs, operating within a voltage range of 10 to 30VDC. The no-load supply current is ? 20mA, and the load current is ?300mA, with a leakage current of ? 100?A at 30Vdc. The output voltage drop is ?1.2V at Iload=100mA, with a maximum ripple content of ?10%. LED indicators include a red light for output status and a green light for stability. The sensors have a time delay before availability of ?200ms and are equipped with short-circuit and reverse polarity protection. Emitting a red LED light at 660nm, they are resistant to external light interference up to 3000lux from incandescent lamps and 10000lux. The sensors are compact, with dimensions of 15x23x71 mm and a weight of 70g. They are housed in durable ABS material with an acrylic active head, offering mechanical protection rated at IP65. They are designed to operate in temperatures ranging from -25°C to +70°C without freezing. The sensors are CE approved and EMC compatible with EN 60947-5-2 standards, and they withstand shocks and vibrations as per IEC 60068-2-6 and IEC 60068-2-28 standards. Supplied with ST70 mounting brackets and screws, these sensors are ideal for a variety of industrial applications.