Motion Control and Robotics
-
Schneider Electric SH31003P0AA4100 Sh3 Motor 100.3 Sgl Omc Ang Ip65
Schneider Electric
$2,616.25Lexium SH3 Servo motors are designed to fit Lexium 62 and Lexium 52 servo drives, part of PacDrive 3, an automation solution for motion centric machines. The servo motor features maximum mechanical speed of 6000RPM and smooth shaft end without holding...- SKU:
- SH31003P0AA4100
- Nominal Speed:
- 2000 rpm 230 V single phase || 4000 rpm 400 V three phase || 4800 rpm 480 V three phase
- Phase:
- three phase
- Number Of Motor Poles:
- 4
- Sustainable Offer Status:
- Green Premium product
- Electrical Connection:
- straight connector
- China Rohs Regulation:
- X
- Mounting Support:
- international standard flange
- Torque Constant:
- 1.22 N.m/A 120 °C
- Continuous Stall Current:
- 6.6 A
- Rotor Inertia:
- 3.22 kg.cm²
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Circularity Profile:
- N/A
- Product Or Component Type:
- servo motor
- Maximum Mechanical Speed:
- 6000 rpm
- Type Of Cooling:
- natural convection
- Mounting Holes Diameter:
- 9.0 mm
- Length:
- 240.5 mm
- Encoder Type:
- absolute single turn Hiperface DSL
- Pvc Free:
- Yes
- Continuous Stall Torque:
- 8 N.m 115...480 V three phase
- Nominal Torque:
- 7 N.m 230 V single phase || 5.7 N.m 400 V three phase || 5.1 N.m 480 V three phase
- Peak Stall Torque:
- 28.3 N.m 115...480 V three phase
- Device Short Name:
- SH3.....P
- Ip Degree Of Protection:
- motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Shaft Length:
- 40 mm
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Rohs Exemption Information:
- Yes
- Shaft Diameter:
- 19 mm
- Continuous Power:
- 2400 W
- Environmental Disclosure:
- ENVPEP111049EN
- Speed Feedback Resolution:
- 262144 points/turn
- Maximum Axial Force Fa:
- 740 N
- Nominal Output Power:
- 1470 W 230 V single phase || 2390 W 400 V three phase || 2390 W 480 V three phase
- Net Weight:
- 7.5 kg
- Circle Diameter Of The Mounting Holes:
- 115 mm
- Maximum Current Irms:
- 28.3 A
- Motor Flange Size:
- 100 mm
- Back Emf Constant:
- 77 V/krpm 20 °C
- Shaft End:
- smooth shaft
- Centring Collar Depth:
- 3.5 mm
- Maximum Radial Force Fr:
- 3330 N 2000 rpm || 2910 N 3000 rpm || 4200 N 1000 rpm
- Stator Inductance:
- 9.4 mH
- Holding Brake:
- without
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Range Compatibility:
- PacDrive 3
- [Us] Rated Supply Voltage:
- 115...480 V
- Centring Collar Diameter:
- 95 mm
- Number Of Mounting Holes:
- 4
- Mercury Free:
- Yes
- Stator Resistance:
- 1.43 Ohm
- Catalog:
- View
- Datasheet:
- View
$2,616.25 -
Schneider Electric SH31003P0AA4000 Sh3 Motor 100.3 Sgl Omc Ang Ip54
Schneider Electric
$2,376.25Lexium SH3 Servo motors are designed to fit Lexium 62 and Lexium 52 servo drives, part of PacDrive 3, an automation solution for motion centric machines. The servo motor features maximum mechanical speed of 6000RPM and smooth shaft end without holding...- SKU:
- SH31003P0AA4000
- Rohs Exemption Information:
- Yes
- Maximum Radial Force Fr:
- 3730 N 1000 rpm || 2960 N 2000 rpm || 2580 N 3000 rpm
- Electrical Connection:
- rotatable right angled connector
- China Rohs Regulation:
- X
- Shaft End:
- smooth shaft
- Mercury Free:
- Yes
- Centring Collar Depth:
- 3.5 mm
- Shaft Length:
- 40 mm
- Centring Collar Diameter:
- 95 mm
- Maximum Axial Force Fa:
- 740 N
- Environmental Disclosure:
- ENVPEP111049EN
- Type Of Cooling:
- natural convection
- Continuous Power:
- 2400 W
- Maximum Mechanical Speed:
- 6000 rpm
- Torque Constant:
- 1.22 N.m/A 120 °C
- Sustainable Offer Status:
- Green Premium product
- Ip Degree Of Protection:
- motor IP65 EN/IEC 60034-5 || shaft bushing without shaft seal ring IP54 EN/IEC 60034-5
- Stator Inductance:
- 9.4 mH
- Range Compatibility:
- PacDrive 3
- Continuous Stall Current:
- 6.6 A
- Maximum Current Irms:
- 28.3 A
- Length:
- 240.5 mm
- Number Of Mounting Holes:
- 4
- Mounting Holes Diameter:
- 9.0 mm
- Circularity Profile:
- N/A
- Product Or Component Type:
- servo motor
- Peak Stall Torque:
- 28.3 N.m 115...480 V three phase
- Number Of Motor Poles:
- 4
- Rotor Inertia:
- 3.22 kg.cm²
- [Us] Rated Supply Voltage:
- 115...480 V
- Circle Diameter Of The Mounting Holes:
- 115 mm
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Net Weight:
- 7.5 kg
- Device Short Name:
- SH3.....P
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Shaft Diameter:
- 19 mm
- Nominal Output Power:
- 1470 W 230 V single phase || 2390 W 400 V three phase || 2390 W 480 V three phase
- Encoder Type:
- absolute single turn Hiperface DSL
- Speed Feedback Resolution:
- 262144 points/turn
- Phase:
- three phase
- Nominal Torque:
- 7 N.m 230 V single phase || 5.7 N.m 400 V three phase || 5.1 N.m 480 V three phase
- Continuous Stall Torque:
- 8 N.m 115...480 V three phase
- Mounting Support:
- international standard flange
- Pvc Free:
- Yes
- Stator Resistance:
- 1.43 Ohm
- Nominal Speed:
- 2000 rpm 230 V single phase || 4000 rpm 400 V three phase || 4800 rpm 480 V three phase
- Motor Flange Size:
- 100 mm
- Holding Brake:
- without
- Back Emf Constant:
- 77 V/krpm 20 °C
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Catalog:
- View
- Datasheet:
- View
$2,376.25 -
Schneider Electric SH31003P1BA4100 Sh3 Motor 100.3 Key Mlt Omc Ang Ip65
Schneider Electric
$2,841.25Lexium SH3 Servo motors are designed to fit Lexium 62 and Lexium 52 servo drives, part of PacDrive 3, an automation solution for motion centric machines. The servo motor features maximum mechanical speed of 6000RPM and keyed shaft end without holding...- SKU:
- SH31003P1BA4100
- Circularity Profile:
- N/A
- Maximum Current Irms:
- 28.3 A
- Maximum Mechanical Speed:
- 6000 rpm
- Mounting Support:
- international standard flange
- Continuous Stall Current:
- 6.6 A
- Motor Flange Size:
- 100 mm
- Peak Stall Torque:
- 28.3 N.m 115...480 V three phase
- China Rohs Regulation:
- X
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Product Or Component Type:
- servo motor
- Number Of Motor Poles:
- 4
- Rohs Exemption Information:
- Yes
- Maximum Radial Force Fr:
- 90 N 3000 rpm || 130 N 1000 rpm || 105 N 2000 rpm
- Stator Inductance:
- 9.4 mH
- Pvc Free:
- Yes
- Number Of Mounting Holes:
- 4
- Continuous Stall Torque:
- 8 N.m 115...480 V three phase
- Centring Collar Depth:
- 3.5 mm
- [Us] Rated Supply Voltage:
- 115...480 V
- Ip Degree Of Protection:
- motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
- Environmental Disclosure:
- ENVPEP111049EN
- Circle Diameter Of The Mounting Holes:
- 115 mm
- Rotor Inertia:
- 3.22 kg.cm²
- Mercury Free:
- Yes
- Net Weight:
- 7.5 kg
- Nominal Output Power:
- 1470 W 230 V single phase || 2390 W 400 V three phase || 2390 W 480 V three phase
- Maximum Axial Force Fa:
- 20 N
- Speed Feedback Resolution:
- 262144 points/turn x 4096 turns
- Electrical Connection:
- rotatable right angled connector
- Mounting Holes Diameter:
- 9.0 mm
- Range Compatibility:
- PacDrive 3
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Shaft End:
- parallel key
- Phase:
- three phase
- Length:
- 240.5 mm
- Key Width:
- 6 mm
- Nominal Torque:
- 7 N.m 230 V single phase || 5.7 N.m 400 V three phase || 5.1 N.m 480 V three phase
- Type Of Cooling:
- natural convection
- Shaft Diameter:
- 19 mm
- Device Short Name:
- SH3.....P
- Encoder Type:
- absolute multiturn Hiperface DSL
- Centring Collar Diameter:
- 95 mm
- Holding Brake:
- without
- Back Emf Constant:
- 77 V/krpm 20 °C
- Shaft Length:
- 40 mm
- Continuous Power:
- 2400 W
- Torque Constant:
- 1.22 N.m/A 120 °C
- Nominal Speed:
- 2000 rpm 230 V single phase || 4000 rpm 400 V three phase || 4800 rpm 480 V three phase
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Sustainable Offer Status:
- Green Premium product
- Stator Resistance:
- 1.43 Ohm
- Catalog:
- View
- Datasheet:
- View
$2,841.25 -
Schneider Electric SH31003P1BA4000 Sh3 Motor 100.3 Key Mlt Omc Ang Ip54
Schneider Electric
$2,821.25Lexium SH3 Servo motors are designed to fit Lexium 62 and Lexium 52 servo drives, part of PacDrive 3, an automation solution for motion centric machines. The servo motor features maximum mechanical speed of 6000RPM and keyed shaft end without holding...- SKU:
- SH31003P1BA4000
- Shaft Length:
- 40 mm
- Key Width:
- 6 mm
- Centring Collar Diameter:
- 95 mm
- Speed Feedback Resolution:
- 262144 points/turn x 4096 turns
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Length:
- 240.5 mm
- Nominal Output Power:
- 1470 W 230 V single phase || 2390 W 400 V three phase || 2390 W 480 V three phase
- Rohs Exemption Information:
- Yes
- Circularity Profile:
- N/A
- Shaft Diameter:
- 19 mm
- Rotor Inertia:
- 3.22 kg.cm²
- Nominal Speed:
- 2000 rpm 230 V single phase || 4000 rpm 400 V three phase || 4800 rpm 480 V three phase
- Maximum Current Irms:
- 28.3 A
- Centring Collar Depth:
- 3.5 mm
- Mounting Support:
- international standard flange
- Encoder Type:
- absolute multiturn Hiperface DSL
- Stator Inductance:
- 9.4 mH
- Holding Brake:
- without
- Type Of Cooling:
- natural convection
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Product Or Component Type:
- servo motor
- Peak Stall Torque:
- 28.3 N.m 115...480 V three phase
- Nominal Torque:
- 7 N.m 230 V single phase || 5.7 N.m 400 V three phase || 5.1 N.m 480 V three phase
- Maximum Axial Force Fa:
- 740 N
- Continuous Power:
- 2400 W
- Pvc Free:
- Yes
- Shaft End:
- parallel key
- Circle Diameter Of The Mounting Holes:
- 115 mm
- Sustainable Offer Status:
- Green Premium product
- Phase:
- three phase
- Back Emf Constant:
- 77 V/krpm 20 °C
- Mounting Holes Diameter:
- 9.0 mm
- Continuous Stall Torque:
- 8 N.m 115...480 V three phase
- Maximum Radial Force Fr:
- 3570 N 2000 rpm || 3120 N 3000 rpm || 4500 N 1000 rpm
- Device Short Name:
- SH3.....P
- Torque Constant:
- 1.22 N.m/A 120 °C
- Number Of Motor Poles:
- 4
- Net Weight:
- 7.5 kg
- Ip Degree Of Protection:
- motor IP65 EN/IEC 60034-5 || shaft bushing without shaft seal ring IP54 EN/IEC 60034-5
- Range Compatibility:
- PacDrive 3
- Environmental Disclosure:
- ENVPEP111049EN
- Electrical Connection:
- rotatable right angled connector
- Stator Resistance:
- 1.43 Ohm
- Mercury Free:
- Yes
- China Rohs Regulation:
- X
- [Us] Rated Supply Voltage:
- 115...480 V
- Continuous Stall Current:
- 6.6 A
- Motor Flange Size:
- 100 mm
- Maximum Mechanical Speed:
- 6000 rpm
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Number Of Mounting Holes:
- 4
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Catalog:
- View
- Datasheet:
- View
$2,821.25 -
Schneider Electric SH31003P1AA4100 Sh3 Motor 100.3 Key Sgl Omc Ang Ip65
Schneider Electric
$2,466.25Lexium SH3 Servo motors are designed to fit Lexium 62 and Lexium 52 servo drives, part of PacDrive 3, an automation solution for motion centric machines. The servo motor features maximum mechanical speed of 6000RPM and keyed shaft end without holding...- SKU:
- SH31003P1AA4100
- Continuous Power:
- 2400 W
- Stator Inductance:
- 9.4 mH
- Holding Brake:
- without
- Nominal Torque:
- 7 N.m 230 V single phase || 5.7 N.m 400 V three phase || 5.1 N.m 480 V three phase
- Net Weight:
- 7.5 kg
- Range Compatibility:
- PacDrive 3
- Rotor Inertia:
- 3.22 kg.cm²
- Length:
- 240.5 mm
- Back Emf Constant:
- 77 V/krpm 20 °C
- Rohs Exemption Information:
- Yes
- Stator Resistance:
- 1.43 Ohm
- Electrical Connection:
- straight connector
- Shaft Length:
- 40 mm
- Key Width:
- 6 mm
- Centring Collar Depth:
- 3.5 mm
- Circle Diameter Of The Mounting Holes:
- 115 mm
- Mercury Free:
- Yes
- Device Short Name:
- SH3.....P
- Peak Stall Torque:
- 28.3 N.m 115...480 V three phase
- Mounting Support:
- international standard flange
- Maximum Radial Force Fr:
- 4200 N 1000 rpm || 3330 N 2000 rpm || 2910 N 3000 rpm
- [Us] Rated Supply Voltage:
- 115...480 V
- Number Of Mounting Holes:
- 4
- Continuous Stall Torque:
- 8 N.m 115...480 V three phase
- Shaft End:
- parallel key
- Shaft Diameter:
- 19 mm
- Type Of Cooling:
- natural convection
- Encoder Type:
- absolute single turn Hiperface DSL
- Speed Feedback Resolution:
- 262144 points/turn
- Maximum Axial Force Fa:
- 740 N
- Phase:
- three phase
- Motor Flange Size:
- 100 mm
- Number Of Motor Poles:
- 4
- Nominal Speed:
- 2000 rpm 230 V single phase || 4000 rpm 400 V three phase || 4800 rpm 480 V three phase
- Circularity Profile:
- N/A
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Continuous Stall Current:
- 6.6 A
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Mounting Holes Diameter:
- 9.0 mm
- Sustainable Offer Status:
- Green Premium product
- Centring Collar Diameter:
- 95 mm
- Torque Constant:
- 1.22 N.m/A 120 °C
- Product Or Component Type:
- servo motor
- China Rohs Regulation:
- X
- Ip Degree Of Protection:
- motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
- Pvc Free:
- Yes
- Maximum Mechanical Speed:
- 6000 rpm
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Maximum Current Irms:
- 28.3 A
- Environmental Disclosure:
- ENVPEP111049EN
- Nominal Output Power:
- 1470 W 230 V single phase || 2390 W 400 V three phase || 2390 W 480 V three phase
- Catalog:
- View
- Datasheet:
- View
$2,466.25 -
Schneider Electric SH31003P1AA4000 Sh3 Motor 100.3 Key Sgl Omc Ang Ip54
Schneider Electric
$2,446.25Lexium SH3 Servo motors are designed to fit Lexium 62 and Lexium 52 servo drives, part of PacDrive 3, an automation solution for motion centric machines. The servo motor features maximum mechanical speed of 6000RPM and keyed shaft end without holding...- SKU:
- SH31003P1AA4000
- Number Of Mounting Holes:
- 4
- Nominal Speed:
- 2000 rpm 230 V single phase || 4000 rpm 400 V three phase || 4800 rpm 480 V three phase
- Electrical Connection:
- rotatable right angled connector
- Holding Brake:
- without
- Mounting Holes Diameter:
- 9.0 mm
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Maximum Mechanical Speed:
- 6000 rpm
- Range Compatibility:
- PacDrive 3
- Motor Flange Size:
- 100 mm
- Nominal Output Power:
- 1470 W 230 V single phase || 2390 W 400 V three phase || 2390 W 480 V three phase
- Speed Feedback Resolution:
- 262144 points/turn
- Back Emf Constant:
- 77 V/krpm 20 °C
- Phase:
- three phase
- Circle Diameter Of The Mounting Holes:
- 115 mm
- Sustainable Offer Status:
- Green Premium product
- Nominal Torque:
- 7 N.m 230 V single phase || 5.7 N.m 400 V three phase || 5.1 N.m 480 V three phase
- Mounting Support:
- international standard flange
- Ip Degree Of Protection:
- motor IP65 EN/IEC 60034-5 || shaft bushing without shaft seal ring IP54 EN/IEC 60034-5
- Key Width:
- 6 mm
- Shaft Diameter:
- 19 mm
- Maximum Axial Force Fa:
- 740 N
- Type Of Cooling:
- natural convection
- Centring Collar Depth:
- 3.5 mm
- Continuous Power:
- 2400 W
- Torque Constant:
- 1.22 N.m/A 120 °C
- Mercury Free:
- Yes
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Continuous Stall Torque:
- 8 N.m 115...480 V three phase
- Maximum Current Irms:
- 28.3 A
- Number Of Motor Poles:
- 4
- Maximum Radial Force Fr:
- 2580 N 3000 rpm || 4200 N 1000 rpm || 3330 N 2000 rpm || 2910 N 3000 rpm
- Stator Inductance:
- 9.4 mH
- Rotor Inertia:
- 3.22 kg.cm²
- Device Short Name:
- SH3.....P
- China Rohs Regulation:
- X
- Rohs Exemption Information:
- Yes
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Product Or Component Type:
- servo motor
- Centring Collar Diameter:
- 95 mm
- Peak Stall Torque:
- 28.3 N.m 115...480 V three phase
- Pvc Free:
- Yes
- Length:
- 240.5 mm
- Shaft End:
- parallel key
- Continuous Stall Current:
- 6.6 A
- Encoder Type:
- absolute single turn Hiperface DSL
- Circularity Profile:
- N/A
- [Us] Rated Supply Voltage:
- 115...480 V
- Shaft Length:
- 40 mm
- Stator Resistance:
- 1.43 Ohm
- Environmental Disclosure:
- ENVPEP111049EN
- Net Weight:
- 7.5 kg
- Catalog:
- View
- Datasheet:
- View
$2,446.25 -
Schneider Electric SH31002P0BF4100 Sh3 Motor 100.2 Mlt Brk Omc Ang Ip65
Schneider Electric
$2,871.25Lexium SH3 Servo motors are designed to fit Lexium 62 and Lexium 52 servo drives, part of PacDrive 3, an automation solution for motion centric machines. The servo motor features maximum mechanical speed of 6000RPM and smooth shaft end with holding brake...- SKU:
- SH31002P0BF4100
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Holding Torque:
- 9 N.m
- Nominal Speed:
- 2000 rpm 230 V single phase || 4000 rpm 400 V three phase || 4800 rpm 480 V three phase
- Holding Brake:
- with
- Pvc Free:
- Yes
- Stator Resistance:
- 2.4 Ohm
- Mounting Support:
- international standard flange
- Rotor Inertia:
- 2.928 kg.cm²
- Circularity Profile:
- N/A
- Rohs Exemption Information:
- Yes
- Centring Collar Diameter:
- 95 mm
- Electrical Connection:
- straight connector
- China Rohs Regulation:
- X
- Length:
- 235.5 mm
- Nominal Output Power:
- 1090 W 230 V single phase || 1930 W 400 V three phase || 1930 W 480 V three phase
- Motor Flange Size:
- 100 mm
- Back Emf Constant:
- 77 V/krpm 20 °C
- Nominal Torque:
- 5.2 N.m 230 V single phase || 4.6 N.m 400 V three phase || 4.4 N.m 480 V three phase
- Encoder Type:
- absolute multiturn Hiperface DSL
- Sustainable Offer Status:
- Green Premium product
- Circle Diameter Of The Mounting Holes:
- 115 mm
- Ip Degree Of Protection:
- motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
- Centring Collar Depth:
- 3.5 mm
- Device Short Name:
- SH3.....P
- Speed Feedback Resolution:
- 262144 points/turn x 4096 turns
- Phase:
- three phase
- Stator Inductance:
- 13.5 mH
- Brake Pull-In Power:
- 12 W
- Continuous Power:
- 1930 W
- Mercury Free:
- Yes
- Continuous Stall Torque:
- 5.8 N.m 115...480 V three phase
- Mounting Holes Diameter:
- 9.0 mm
- [Us] Rated Supply Voltage:
- 115...480 V
- Maximum Radial Force Fr:
- 2960 N 2000 rpm || 2580 N 3000 rpm || 3730 N 1000 rpm
- Maximum Axial Force Fa:
- 740 N
- Shaft End:
- smooth shaft
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Continuous Stall Current:
- 4.8 A
- Environmental Disclosure:
- ENVPEP111049EN
- Maximum Current Irms:
- 17.1 A
- Shaft Diameter:
- 19 mm
- Peak Stall Torque:
- 18.3 N.m 115...480 V three phase
- Torque Constant:
- 1.21 N.m/A 120 °C
- Range Compatibility:
- PacDrive 3
- Net Weight:
- 6.6 kg
- Maximum Mechanical Speed:
- 6000 rpm
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Number Of Mounting Holes:
- 4
- Product Or Component Type:
- servo motor
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Type Of Cooling:
- natural convection
- Number Of Motor Poles:
- 4
- Shaft Length:
- 40 mm
- Catalog:
- View
- Datasheet:
- View
$2,871.25 -
Schneider Electric SH31002P0BF4000 Sh3 Motor 100.2 Mlt Brk Omc Ang Ip54
Schneider Electric
$2,783.75Lexium SH3 Servo motors are designed to fit Lexium 62 and Lexium 52 servo drives, part of PacDrive 3, an automation solution for motion centric machines. The servo motor features maximum mechanical speed of 6000RPM and smooth shaft end with holding brake...- SKU:
- SH31002P0BF4000
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Continuous Power:
- 1930 W
- Length:
- 235.5 mm
- Maximum Mechanical Speed:
- 6000 rpm
- Circle Diameter Of The Mounting Holes:
- 115 mm
- Holding Brake:
- with
- Nominal Torque:
- 5.2 N.m 230 V single phase || 4.6 N.m 400 V three phase || 4.4 N.m 480 V three phase
- Holding Torque:
- 9 N.m
- Net Weight:
- 6.6 kg
- Shaft Diameter:
- 19 mm
- Torque Constant:
- 1.21 N.m/A 120 °C
- Peak Stall Torque:
- 18.3 N.m 115...480 V three phase
- Nominal Output Power:
- 1090 W 230 V single phase || 1930 W 400 V three phase || 1930 W 480 V three phase
- Electrical Connection:
- rotatable right angled connector
- Stator Inductance:
- 13.5 mH
- Rohs Exemption Information:
- Yes
- Rotor Inertia:
- 2.928 kg.cm²
- Brake Pull-In Power:
- 12 W
- Speed Feedback Resolution:
- 262144 points/turn x 4096 turns
- Nominal Speed:
- 2000 rpm 230 V single phase || 4000 rpm 400 V three phase || 4800 rpm 480 V three phase
- Mounting Holes Diameter:
- 9.0 mm
- Number Of Motor Poles:
- 4
- Motor Flange Size:
- 100 mm
- Circularity Profile:
- N/A
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Continuous Stall Current:
- 4.8 A
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- China Rohs Regulation:
- X
- Device Short Name:
- SH3.....P
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Encoder Type:
- absolute multiturn Hiperface DSL
- Continuous Stall Torque:
- 5.8 N.m 115...480 V three phase
- [Us] Rated Supply Voltage:
- 115...480 V
- Mounting Support:
- international standard flange
- Type Of Cooling:
- natural convection
- Pvc Free:
- Yes
- Stator Resistance:
- 2.4 Ohm
- Centring Collar Depth:
- 3.5 mm
- Ip Degree Of Protection:
- motor IP65 EN/IEC 60034-5 || shaft bushing without shaft seal ring IP54 EN/IEC 60034-5
- Maximum Current Irms:
- 17.1 A
- Sustainable Offer Status:
- Green Premium product
- Number Of Mounting Holes:
- 4
- Mercury Free:
- Yes
- Shaft End:
- smooth shaft
- Back Emf Constant:
- 77 V/krpm 20 °C
- Shaft Length:
- 40 mm
- Centring Collar Diameter:
- 95 mm
- Environmental Disclosure:
- ENVPEP111049EN
- Phase:
- three phase
- Maximum Axial Force Fa:
- 300 N
- Product Or Component Type:
- servo motor
- Range Compatibility:
- PacDrive 3
- Maximum Radial Force Fr:
- 2660 N 1000 rpm || 2110 N 2000 rpm || 1840 N 3000 rpm
- Catalog:
- View
- Datasheet:
- View
$2,783.75 -
Schneider Electric SH31002P0AF4100 Sh3 Motor 100.2 Sgl Brk Omc Ang Ip65
Schneider Electric
$2,648.75Lexium SH3 Servo motors are designed to fit Lexium 62 and Lexium 52 servo drives, part of PacDrive 3, an automation solution for motion centric machines. The servo motor features maximum mechanical speed of 6000RPM and smooth shaft end with holding brake...- SKU:
- SH31002P0AF4100
- Shaft Length:
- 40 mm
- Continuous Stall Torque:
- 5.8 N.m 115...480 V three phase
- Holding Brake:
- with
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Mounting Holes Diameter:
- 9.0 mm
- Pvc Free:
- Yes
- Back Emf Constant:
- 77 V/krpm 20 °C
- Circle Diameter Of The Mounting Holes:
- 115 mm
- Centring Collar Depth:
- 3.5 mm
- Maximum Current Irms:
- 17.1 A
- Speed Feedback Resolution:
- 262144 points/turn
- Continuous Power:
- 1930 W
- Number Of Motor Poles:
- 4
- Circularity Profile:
- N/A
- China Rohs Regulation:
- X
- Encoder Type:
- absolute single turn Hiperface DSL
- Electrical Connection:
- straight connector
- Holding Torque:
- 9 N.m
- Rohs Exemption Information:
- Yes
- Mounting Support:
- international standard flange
- Centring Collar Diameter:
- 95 mm
- Torque Constant:
- 1.21 N.m/A 120 °C
- Motor Flange Size:
- 100 mm
- Nominal Speed:
- 2000 rpm 230 V single phase || 4000 rpm 400 V three phase || 4800 rpm 480 V three phase
- Net Weight:
- 6.6 kg
- Maximum Radial Force Fr:
- 1670 N 3000 rpm || 2420 N 1000 rpm || 1920 N 2000 rpm
- Stator Inductance:
- 13.5 mH
- Rotor Inertia:
- 2.928 kg.cm²
- Nominal Output Power:
- 1090 W 230 V single phase || 1930 W 400 V three phase || 1930 W 480 V three phase
- Maximum Mechanical Speed:
- 6000 rpm
- Shaft End:
- smooth shaft
- Stator Resistance:
- 2.4 Ohm
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Ip Degree Of Protection:
- motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
- Maximum Axial Force Fa:
- 300 N
- Brake Pull-In Power:
- 12 W
- Length:
- 235.5 mm
- [Us] Rated Supply Voltage:
- 115...480 V
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Phase:
- three phase
- Environmental Disclosure:
- ENVPEP111049EN
- Peak Stall Torque:
- 18.3 N.m 115...480 V three phase
- Continuous Stall Current:
- 4.8 A
- Nominal Torque:
- 5.2 N.m 230 V single phase || 4.6 N.m 400 V three phase || 4.4 N.m 480 V three phase
- Shaft Diameter:
- 19 mm
- Sustainable Offer Status:
- Green Premium product
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Type Of Cooling:
- natural convection
- Number Of Mounting Holes:
- 4
- Mercury Free:
- Yes
- Device Short Name:
- SH3.....P
- Range Compatibility:
- PacDrive 3
- Product Or Component Type:
- servo motor
- Catalog:
- View
- Datasheet:
- View
$2,648.75 -
Schneider Electric SH31002P0AF4000 Sh3 Motor 100.2 Sgl Brk Omc Ang Ip54
Schneider Electric
$2,408.75Lexium SH3 Servo motors are designed to fit Lexium 62 and Lexium 52 servo drives, part of PacDrive 3, an automation solution for motion centric machines. The servo motor features maximum mechanical speed of 6000RPM and smooth shaft end with holding brake...- SKU:
- SH31002P0AF4000
- Pvc Free:
- Yes
- Rohs Exemption Information:
- Yes
- Ip Degree Of Protection:
- motor IP65 EN/IEC 60034-5 || shaft bushing without shaft seal ring IP54 EN/IEC 60034-5
- Shaft End:
- smooth shaft
- Phase:
- three phase
- Continuous Stall Torque:
- 5.8 N.m 115...480 V three phase
- [Us] Rated Supply Voltage:
- 115...480 V
- Shaft Length:
- 40 mm
- Product Or Component Type:
- servo motor
- Maximum Radial Force Fr:
- 1780 N 2000 rpm || 1550 N 3000 rpm || 2420 N 1000 rpm || 1920 N 2000 rpm || 1670 N 3000 rpm
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- China Rohs Regulation:
- X
- Speed Feedback Resolution:
- 262144 points/turn
- Environmental Disclosure:
- ENVPEP111049EN
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Brake Pull-In Power:
- 12 W
- Device Short Name:
- SH3.....P
- Range Compatibility:
- PacDrive 3
- Sustainable Offer Status:
- Green Premium product
- Centring Collar Depth:
- 3.5 mm
- Mounting Support:
- international standard flange
- Continuous Power:
- 1930 W
- Continuous Stall Current:
- 4.8 A
- Mounting Holes Diameter:
- 9.0 mm
- Peak Stall Torque:
- 18.3 N.m 115...480 V three phase
- Back Emf Constant:
- 77 V/krpm 20 °C
- Nominal Torque:
- 5.2 N.m 230 V single phase || 4.6 N.m 400 V three phase || 4.4 N.m 480 V three phase
- Shaft Diameter:
- 19 mm
- Circularity Profile:
- N/A
- Stator Resistance:
- 2.4 Ohm
- Motor Flange Size:
- 100 mm
- Number Of Mounting Holes:
- 4
- Holding Brake:
- with
- Nominal Speed:
- 2000 rpm 230 V single phase || 4000 rpm 400 V three phase || 4800 rpm 480 V three phase
- Torque Constant:
- 1.21 N.m/A 120 °C
- Length:
- 235.5 mm
- Maximum Axial Force Fa:
- 300 N
- Nominal Output Power:
- 1090 W 230 V single phase || 1930 W 400 V three phase || 1930 W 480 V three phase
- Stator Inductance:
- 13.5 mH
- Type Of Cooling:
- natural convection
- Holding Torque:
- 9 N.m
- Encoder Type:
- absolute single turn Hiperface DSL
- Circle Diameter Of The Mounting Holes:
- 115 mm
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Mercury Free:
- Yes
- Centring Collar Diameter:
- 95 mm
- Net Weight:
- 6.6 kg
- Electrical Connection:
- straight connector
- Maximum Current Irms:
- 17.1 A
- Number Of Motor Poles:
- 4
- Rotor Inertia:
- 2.928 kg.cm²
- Maximum Mechanical Speed:
- 6000 rpm
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Catalog:
- View
- Datasheet:
- View
$2,408.75 -
Schneider Electric SH31002P1BF4100 Sh3 Motor 100.2 Key Mlt Brk Omc Ang Ip65
Schneider Electric
$2,941.25Lexium SH3 Servo motors are designed to fit Lexium 62 and Lexium 52 servo drives, part of PacDrive 3, an automation solution for motion centric machines. The servo motor features maximum mechanical speed of 6000RPM and keyed shaft end with holding brake...- SKU:
- SH31002P1BF4100
- Continuous Power:
- 1930 W
- Maximum Radial Force Fr:
- 3730 N 1000 rpm || 2960 N 2000 rpm || 2580 N 3000 rpm
- Shaft Diameter:
- 19 mm
- Continuous Stall Current:
- 4.8 A
- Type Of Cooling:
- natural convection
- Mounting Support:
- international standard flange
- Rotor Inertia:
- 2.928 kg.cm²
- Range Compatibility:
- PacDrive 3
- Pvc Free:
- Yes
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Circularity Profile:
- N/A
- Number Of Mounting Holes:
- 4
- Maximum Mechanical Speed:
- 6000 rpm
- Electrical Connection:
- straight connector
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Number Of Motor Poles:
- 4
- Stator Resistance:
- 2.4 Ohm
- Shaft Length:
- 40 mm
- Maximum Axial Force Fa:
- 740 N
- Continuous Stall Torque:
- 5.8 N.m 115...480 V three phase
- Holding Torque:
- 9 N.m
- Peak Stall Torque:
- 18.3 N.m 115...480 V three phase
- Nominal Output Power:
- 1090 W 230 V single phase || 1930 W 400 V three phase || 1930 W 480 V three phase
- Mercury Free:
- Yes
- Shaft End:
- parallel key
- Holding Brake:
- with
- Motor Flange Size:
- 100 mm
- Back Emf Constant:
- 77 V/krpm 20 °C
- Centring Collar Depth:
- 3.5 mm
- Encoder Type:
- absolute multiturn Hiperface DSL
- Sustainable Offer Status:
- Green Premium product
- Ip Degree Of Protection:
- motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
- Phase:
- three phase
- China Rohs Regulation:
- X
- Rohs Exemption Information:
- Yes
- Environmental Disclosure:
- ENVPEP111049EN
- Net Weight:
- 6.6 kg
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Circle Diameter Of The Mounting Holes:
- 115 mm
- Torque Constant:
- 1.21 N.m/A 120 °C
- Nominal Speed:
- 2000 rpm 230 V single phase || 4000 rpm 400 V three phase || 4800 rpm 480 V three phase
- Length:
- 235.5 mm
- [Us] Rated Supply Voltage:
- 115...480 V
- Device Short Name:
- SH3.....P
- Stator Inductance:
- 13.5 mH
- Centring Collar Diameter:
- 95 mm
- Speed Feedback Resolution:
- 262144 points/turn x 4096 turns
- Product Or Component Type:
- servo motor
- Mounting Holes Diameter:
- 9.0 mm
- Key Width:
- 6 mm
- Brake Pull-In Power:
- 12 W
- Nominal Torque:
- 5.2 N.m 230 V single phase || 4.6 N.m 400 V three phase || 4.4 N.m 480 V three phase
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Maximum Current Irms:
- 17.1 A
- Catalog:
- View
- Datasheet:
- View
$2,941.25 -
Schneider Electric SH31002P1BF4000 Sh3 Motor 100.2 Key Mlt Brk Omc Ang Ip54
Schneider Electric
$2,853.75Lexium SH3 Servo motors are designed to fit Lexium 62 and Lexium 52 servo drives, part of PacDrive 3, an automation solution for motion centric machines. The servo motor features maximum mechanical speed of 6000RPM and keyed shaft end with holding brake...- SKU:
- SH31002P1BF4000
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Mercury Free:
- Yes
- Brake Pull-In Power:
- 12 W
- Environmental Disclosure:
- ENVPEP111049EN
- Holding Torque:
- 9 N.m
- Type Of Cooling:
- natural convection
- Peak Stall Torque:
- 18.3 N.m 115...480 V three phase
- Motor Flange Size:
- 100 mm
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Shaft End:
- parallel key
- Phase:
- three phase
- Range Compatibility:
- PacDrive 3
- Continuous Stall Torque:
- 5.8 N.m 115...480 V three phase
- Nominal Output Power:
- 1090 W 230 V single phase || 1930 W 400 V three phase || 1930 W 480 V three phase
- Mounting Support:
- international standard flange
- Ip Degree Of Protection:
- motor IP65 EN/IEC 60034-5 || shaft bushing without shaft seal ring IP54 EN/IEC 60034-5
- Maximum Axial Force Fa:
- 300 N
- Pvc Free:
- Yes
- Mounting Holes Diameter:
- 9.0 mm
- Device Short Name:
- SH3.....P
- Torque Constant:
- 1.21 N.m/A 120 °C
- Shaft Length:
- 40 mm
- Maximum Mechanical Speed:
- 6000 rpm
- Holding Brake:
- with
- Net Weight:
- 6.6 kg
- Nominal Torque:
- 5.2 N.m 230 V single phase || 4.6 N.m 400 V three phase || 4.4 N.m 480 V three phase
- Electrical Connection:
- rotatable right angled connector
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Back Emf Constant:
- 77 V/krpm 20 °C
- Continuous Power:
- 1930 W
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Centring Collar Depth:
- 3.5 mm
- Encoder Type:
- absolute multiturn Hiperface DSL
- Rohs Exemption Information:
- Yes
- Sustainable Offer Status:
- Green Premium product
- Number Of Motor Poles:
- 4
- Shaft Diameter:
- 19 mm
- Length:
- 235.5 mm
- Circularity Profile:
- N/A
- Centring Collar Diameter:
- 95 mm
- Number Of Mounting Holes:
- 4
- Maximum Current Irms:
- 17.1 A
- Stator Resistance:
- 2.4 Ohm
- Nominal Speed:
- 2000 rpm 230 V single phase || 4000 rpm 400 V three phase || 4800 rpm 480 V three phase
- Speed Feedback Resolution:
- 262144 points/turn x 4096 turns
- Maximum Radial Force Fr:
- 1840 N 3000 rpm || 2660 N 1000 rpm || 2110 N 2000 rpm
- China Rohs Regulation:
- X
- Circle Diameter Of The Mounting Holes:
- 115 mm
- Stator Inductance:
- 13.5 mH
- Continuous Stall Current:
- 4.8 A
- Product Or Component Type:
- servo motor
- [Us] Rated Supply Voltage:
- 115...480 V
- Key Width:
- 6 mm
- Rotor Inertia:
- 2.928 kg.cm²
- Catalog:
- View
- Datasheet:
- View
$2,853.75 -
Schneider Electric SH31002P1AF4100 Sh3 Motor 100.2 Key Sgl Brk Omc Ang Ip65
Schneider Electric
$2,718.75Lexium SH3 Servo motors are designed to fit Lexium 62 and Lexium 52 servo drives, part of PacDrive 3, an automation solution for motion centric machines. The servo motor features maximum mechanical speed of 6000RPM and keyed shaft end with holding brake...- SKU:
- SH31002P1AF4100
- Centring Collar Depth:
- 3.5 mm
- Stator Resistance:
- 2.4 Ohm
- Maximum Current Irms:
- 17.1 A
- [Us] Rated Supply Voltage:
- 115...480 V
- Holding Torque:
- 9 N.m
- Mounting Holes Diameter:
- 9.0 mm
- Nominal Output Power:
- 1090 W 230 V single phase || 1930 W 400 V three phase || 1930 W 480 V three phase
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Encoder Type:
- absolute single turn Hiperface DSL
- Motor Flange Size:
- 100 mm
- Number Of Mounting Holes:
- 4
- Torque Constant:
- 1.21 N.m/A 120 °C
- Ip Degree Of Protection:
- motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
- Device Short Name:
- SH3.....P
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Net Weight:
- 6.6 kg
- Shaft Diameter:
- 19 mm
- Mounting Support:
- international standard flange
- Shaft Length:
- 40 mm
- Type Of Cooling:
- natural convection
- Centring Collar Diameter:
- 95 mm
- Continuous Stall Torque:
- 5.8 N.m 115...480 V three phase
- Nominal Speed:
- 2000 rpm 230 V single phase || 4000 rpm 400 V three phase || 4800 rpm 480 V three phase
- Stator Inductance:
- 13.5 mH
- Maximum Mechanical Speed:
- 6000 rpm
- Circle Diameter Of The Mounting Holes:
- 115 mm
- Environmental Disclosure:
- ENVPEP111049EN
- Mercury Free:
- Yes
- Length:
- 235.5 mm
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Rohs Exemption Information:
- Yes
- Maximum Radial Force Fr:
- 1920 N 2000 rpm || 1670 N 3000 rpm || 2420 N 1000 rpm
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Shaft End:
- parallel key
- Key Width:
- 6 mm
- Product Or Component Type:
- servo motor
- Speed Feedback Resolution:
- 262144 points/turn
- Electrical Connection:
- rotatable right angled connector
- Peak Stall Torque:
- 18.3 N.m 115...480 V three phase
- Nominal Torque:
- 5.2 N.m 230 V single phase || 4.6 N.m 400 V three phase || 4.4 N.m 480 V three phase
- Maximum Axial Force Fa:
- 300 N
- Back Emf Constant:
- 77 V/krpm 20 °C
- Continuous Power:
- 1930 W
- Pvc Free:
- Yes
- Continuous Stall Current:
- 4.8 A
- Brake Pull-In Power:
- 12 W
- Range Compatibility:
- PacDrive 3
- Rotor Inertia:
- 2.928 kg.cm²
- Sustainable Offer Status:
- Green Premium product
- China Rohs Regulation:
- X
- Phase:
- three phase
- Number Of Motor Poles:
- 4
- Holding Brake:
- with
- Circularity Profile:
- N/A
- Catalog:
- View
- Datasheet:
- View
$2,718.75 -
Schneider Electric SH31002P1AF4000 Sh3 Motor 100.2 Key Sgl Brk Omc Ang Ip54
Schneider Electric
$2,478.75Lexium SH3 Servo motors are designed to fit Lexium 62 and Lexium 52 servo drives, part of PacDrive 3, an automation solution for motion centric machines. The servo motor features maximum mechanical speed of 6000RPM and keyed shaft end with holding brake...- SKU:
- SH31002P1AF4000
- Product Or Component Type:
- servo motor
- Device Short Name:
- SH3.....P
- Number Of Motor Poles:
- 4
- Speed Feedback Resolution:
- 262144 points/turn
- Nominal Output Power:
- 1090 W 230 V single phase || 1930 W 400 V three phase || 1930 W 480 V three phase
- Mercury Free:
- Yes
- Shaft End:
- parallel key
- [Us] Rated Supply Voltage:
- 115...480 V
- Encoder Type:
- absolute single turn Hiperface DSL
- Circle Diameter Of The Mounting Holes:
- 115 mm
- Key Width:
- 6 mm
- Environmental Disclosure:
- ENVPEP111049EN
- Circularity Profile:
- N/A
- Shaft Diameter:
- 19 mm
- Holding Torque:
- 9 N.m
- Continuous Stall Current:
- 4.8 A
- Number Of Mounting Holes:
- 4
- Centring Collar Depth:
- 3.5 mm
- Mounting Support:
- international standard flange
- Ip Degree Of Protection:
- motor IP65 EN/IEC 60034-5 || shaft bushing without shaft seal ring IP54 EN/IEC 60034-5
- Maximum Radial Force Fr:
- 2420 N 1000 rpm || 1920 N 2000 rpm || 1670 N 3000 rpm
- Range Compatibility:
- PacDrive 3
- Sustainable Offer Status:
- Green Premium product
- Maximum Current Irms:
- 17.1 A
- Shaft Length:
- 40 mm
- Nominal Speed:
- 2000 rpm 230 V single phase || 4000 rpm 400 V three phase || 4800 rpm 480 V three phase
- Stator Resistance:
- 2.4 Ohm
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Brake Pull-In Power:
- 12 W
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Net Weight:
- 6.6 kg
- Nominal Torque:
- 5.2 N.m 230 V single phase || 4.6 N.m 400 V three phase || 4.4 N.m 480 V three phase
- Continuous Stall Torque:
- 5.8 N.m 115...480 V three phase
- Rohs Exemption Information:
- Yes
- Peak Stall Torque:
- 18.3 N.m 115...480 V three phase
- Electrical Connection:
- straight connector
- Length:
- 235.5 mm
- Back Emf Constant:
- 77 V/krpm 20 °C
- Type Of Cooling:
- natural convection
- Mounting Holes Diameter:
- 9.0 mm
- Pvc Free:
- Yes
- Holding Brake:
- with
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Centring Collar Diameter:
- 95 mm
- Maximum Axial Force Fa:
- 300 N
- Torque Constant:
- 1.21 N.m/A 120 °C
- China Rohs Regulation:
- X
- Stator Inductance:
- 13.5 mH
- Motor Flange Size:
- 100 mm
- Phase:
- three phase
- Continuous Power:
- 1930 W
- Maximum Mechanical Speed:
- 6000 rpm
- Rotor Inertia:
- 2.928 kg.cm²
- Catalog:
- View
- Datasheet:
- View
$2,478.75 -
Schneider Electric SH31002P0BA4100 Sh3 Motor 100.2 Mlt Omc Ang Ip65
Schneider Electric
$2,382.50Lexium SH3 Servo motors are designed to fit Lexium 62 and Lexium 52 servo drives, part of PacDrive 3, an automation solution for motion centric machines. The servo motor features maximum mechanical speed of 6000RPM and smooth shaft end without holding...- SKU:
- SH31002P0BA4100
- Product Or Component Type:
- servo motor
- Continuous Stall Torque:
- 5.8 N.m 115...480 V three phase
- Rotor Inertia:
- 2.31 kg.cm²
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Electrical Connection:
- straight connector
- Nominal Torque:
- 5.2 N.m 230 V single phase || 4.6 N.m 400 V three phase || 4.4 N.m 480 V three phase
- Circle Diameter Of The Mounting Holes:
- 115 mm
- Mercury Free:
- Yes
- Shaft Diameter:
- 19 mm
- Length:
- 204.5 mm
- Type Of Cooling:
- natural convection
- Sustainable Offer Status:
- Green Premium product
- Device Short Name:
- SH3.....P
- Shaft End:
- smooth shaft
- Nominal Output Power:
- 1090 W 230 V single phase || 1930 W 400 V three phase || 1930 W 480 V three phase
- Peak Stall Torque:
- 18.3 N.m 115...480 V three phase
- Pvc Free:
- Yes
- Number Of Mounting Holes:
- 4
- Maximum Current Irms:
- 17.1 A
- Maximum Radial Force Fr:
- 2580 N 3000 rpm || 3730 N 1000 rpm || 2960 N 2000 rpm
- Holding Brake:
- without
- Circularity Profile:
- N/A
- Mounting Holes Diameter:
- 9.0 mm
- Phase:
- three phase
- Shaft Length:
- 40 mm
- Speed Feedback Resolution:
- 262144 points/turn x 4096 turns
- Back Emf Constant:
- 77 V/krpm 20 °C
- Number Of Motor Poles:
- 4
- Mounting Support:
- international standard flange
- Continuous Power:
- 1930 W
- Torque Constant:
- 1.21 N.m/A 120 °C
- Centring Collar Diameter:
- 95 mm
- Encoder Type:
- absolute multiturn Hiperface DSL
- Stator Inductance:
- 13.5 mH
- Motor Flange Size:
- 100 mm
- Centring Collar Depth:
- 3.5 mm
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Environmental Disclosure:
- ENVPEP111049EN
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Net Weight:
- 5.9 kg
- Nominal Speed:
- 2000 rpm 230 V single phase || 4000 rpm 400 V three phase || 4800 rpm 480 V three phase
- Rohs Exemption Information:
- Yes
- [Us] Rated Supply Voltage:
- 115...480 V
- Continuous Stall Current:
- 4.8 A
- Maximum Mechanical Speed:
- 6000 rpm
- Maximum Axial Force Fa:
- 740 N
- China Rohs Regulation:
- X
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Range Compatibility:
- PacDrive 3
- Stator Resistance:
- 2.4 Ohm
- Ip Degree Of Protection:
- motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
- Catalog:
- View
- Datasheet:
- View
$2,382.50 -
Schneider Electric SH31002P0BA4000 Sh3 Motor 100.2 Mlt Omc Ang Ip54
Schneider Electric
$2,362.50Lexium SH3 Servo motors are designed to fit Lexium 62 and Lexium 52 servo drives, part of PacDrive 3, an automation solution for motion centric machines. The servo motor features maximum mechanical speed of 6000RPM and smooth shaft end without holding...- SKU:
- SH31002P0BA4000
- Peak Stall Torque:
- 18.3 N.m 115...480 V three phase
- Mounting Support:
- international standard flange
- China Rohs Regulation:
- X
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Maximum Mechanical Speed:
- 6000 rpm
- Ip Degree Of Protection:
- motor IP65 EN/IEC 60034-5 || shaft bushing without shaft seal ring IP54 EN/IEC 60034-5
- Continuous Stall Torque:
- 5.8 N.m 115...480 V three phase
- Rohs Exemption Information:
- Yes
- Stator Resistance:
- 2.4 Ohm
- Product Or Component Type:
- servo motor
- Stator Inductance:
- 13.5 mH
- Maximum Axial Force Fa:
- 300 N
- Shaft Diameter:
- 19 mm
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Encoder Type:
- absolute multiturn Hiperface DSL
- Range Compatibility:
- PacDrive 3
- Back Emf Constant:
- 77 V/krpm 20 °C
- Mercury Free:
- Yes
- Sustainable Offer Status:
- Green Premium product
- Nominal Speed:
- 2000 rpm 230 V single phase || 4000 rpm 400 V three phase || 4800 rpm 480 V three phase
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Circularity Profile:
- N/A
- Rotor Inertia:
- 2.31 kg.cm²
- Phase:
- three phase
- Maximum Current Irms:
- 17.1 A
- Centring Collar Diameter:
- 95 mm
- Holding Brake:
- without
- Centring Collar Depth:
- 3.5 mm
- Mounting Holes Diameter:
- 9.0 mm
- Shaft Length:
- 40 mm
- Electrical Connection:
- straight connector
- Maximum Radial Force Fr:
- 2110 N 2000 rpm || 1840 N 3000 rpm || 2660 N 1000 rpm
- Length:
- 204.5 mm
- Pvc Free:
- Yes
- Continuous Power:
- 1930 W
- Number Of Mounting Holes:
- 4
- Device Short Name:
- SH3.....P
- Net Weight:
- 5.9 kg
- Motor Flange Size:
- 100 mm
- Environmental Disclosure:
- ENVPEP111049EN
- Speed Feedback Resolution:
- 262144 points/turn x 4096 turns
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Type Of Cooling:
- natural convection
- Torque Constant:
- 1.21 N.m/A 120 °C
- Continuous Stall Current:
- 4.8 A
- Circle Diameter Of The Mounting Holes:
- 115 mm
- Number Of Motor Poles:
- 4
- Nominal Output Power:
- 1090 W 230 V single phase || 1930 W 400 V three phase || 1930 W 480 V three phase
- Nominal Torque:
- 5.2 N.m 230 V single phase || 4.6 N.m 400 V three phase || 4.4 N.m 480 V three phase
- [Us] Rated Supply Voltage:
- 115...480 V
- Shaft End:
- smooth shaft
- Catalog:
- View
- Datasheet:
- View
$2,362.50 -
Schneider Electric SH31002P0AA4100 Sh3 Motor 100.2 Sgl Omc Ang Ip65
Schneider Electric
$2,007.50Lexium SH3 Servo motors are designed to fit Lexium 62 and Lexium 52 servo drives, part of PacDrive 3, an automation solution for motion centric machines. The servo motor features maximum mechanical speed of 6000RPM and smooth shaft end without holding...- SKU:
- SH31002P0AA4100
- Maximum Radial Force Fr:
- 2420 N 1000 rpm || 1920 N 2000 rpm || 1670 N 3000 rpm
- Device Short Name:
- SH3.....P
- Length:
- 204.5 mm
- Rohs Exemption Information:
- Yes
- Ip Degree Of Protection:
- motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Maximum Mechanical Speed:
- 6000 rpm
- Mounting Holes Diameter:
- 9.0 mm
- [Us] Rated Supply Voltage:
- 115...480 V
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Rotor Inertia:
- 2.31 kg.cm²
- Sustainable Offer Status:
- Green Premium product
- Continuous Stall Torque:
- 5.8 N.m 115...480 V three phase
- Centring Collar Depth:
- 3.5 mm
- Back Emf Constant:
- 77 V/krpm 20 °C
- Mercury Free:
- Yes
- Stator Inductance:
- 13.5 mH
- Pvc Free:
- Yes
- Product Or Component Type:
- servo motor
- Torque Constant:
- 1.21 N.m/A 120 °C
- Continuous Stall Current:
- 4.8 A
- Type Of Cooling:
- natural convection
- Stator Resistance:
- 2.4 Ohm
- Maximum Current Irms:
- 17.1 A
- Environmental Disclosure:
- ENVPEP111049EN
- Motor Flange Size:
- 100 mm
- Nominal Torque:
- 5.2 N.m 230 V single phase || 4.6 N.m 400 V three phase || 4.4 N.m 480 V three phase
- Shaft Diameter:
- 19 mm
- Holding Brake:
- without
- Maximum Axial Force Fa:
- 300 N
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Net Weight:
- 5.9 kg
- China Rohs Regulation:
- X
- Shaft Length:
- 40 mm
- Circularity Profile:
- N/A
- Speed Feedback Resolution:
- 262144 points/turn
- Shaft End:
- smooth shaft
- Centring Collar Diameter:
- 95 mm
- Range Compatibility:
- PacDrive 3
- Mounting Support:
- international standard flange
- Nominal Speed:
- 2000 rpm 230 V single phase || 4000 rpm 400 V three phase || 4800 rpm 480 V three phase
- Nominal Output Power:
- 1090 W 230 V single phase || 1930 W 400 V three phase || 1930 W 480 V three phase
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Peak Stall Torque:
- 18.3 N.m 115...480 V three phase
- Number Of Motor Poles:
- 4
- Electrical Connection:
- rotatable right angled connector
- Continuous Power:
- 1930 W
- Circle Diameter Of The Mounting Holes:
- 115 mm
- Number Of Mounting Holes:
- 4
- Phase:
- three phase
- Encoder Type:
- absolute single turn Hiperface DSL
- Catalog:
- View
- Datasheet:
- View
$2,007.50 -
Schneider Electric SH31002P0AA4000 Sh3 Motor 100.2 Sgl Omc Ang Ip54
Schneider Electric
$1,987.50Lexium SH3 Servo motors are designed to fit Lexium 62 and Lexium 52 servo drives, part of PacDrive 3, an automation solution for motion centric machines. The servo motor features maximum mechanical speed of 6000RPM and smooth shaft end without holding...- SKU:
- SH31002P0AA4000
- Ip Degree Of Protection:
- motor IP65 EN/IEC 60034-5 || shaft bushing without shaft seal ring IP54 EN/IEC 60034-5
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Length:
- 204.5 mm
- Nominal Speed:
- 2000 rpm 230 V single phase || 4000 rpm 400 V three phase || 4800 rpm 480 V three phase
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- China Rohs Regulation:
- X
- Phase:
- three phase
- Nominal Torque:
- 5.2 N.m 230 V single phase || 4.6 N.m 400 V three phase || 4.4 N.m 480 V three phase
- Stator Resistance:
- 2.4 Ohm
- Net Weight:
- 5.9 kg
- Mercury Free:
- Yes
- Environmental Disclosure:
- ENVPEP111049EN
- Continuous Stall Torque:
- 5.8 N.m 115...480 V three phase
- Shaft Length:
- 40 mm
- Number Of Motor Poles:
- 4
- Type Of Cooling:
- natural convection
- Product Or Component Type:
- servo motor
- Holding Brake:
- without
- Continuous Stall Current:
- 4.8 A
- Mounting Holes Diameter:
- 9.0 mm
- Continuous Power:
- 1930 W
- Torque Constant:
- 1.21 N.m/A 120 °C
- Nominal Output Power:
- 1090 W 230 V single phase || 1930 W 400 V three phase || 1930 W 480 V three phase
- [Us] Rated Supply Voltage:
- 115...480 V
- Mounting Support:
- international standard flange
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Number Of Mounting Holes:
- 4
- Device Short Name:
- SH3.....P
- Maximum Radial Force Fr:
- 1550 N 3000 rpm || 2240 N 1000 rpm || 1780 N 2000 rpm
- Peak Stall Torque:
- 18.3 N.m 115...480 V three phase
- Sustainable Offer Status:
- Green Premium product
- Motor Flange Size:
- 100 mm
- Shaft End:
- smooth shaft
- Rohs Exemption Information:
- Yes
- Electrical Connection:
- rotatable right angled connector
- Range Compatibility:
- PacDrive 3
- Centring Collar Depth:
- 3.5 mm
- Circularity Profile:
- N/A
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Maximum Axial Force Fa:
- 300 N
- Pvc Free:
- Yes
- Maximum Current Irms:
- 17.1 A
- Rotor Inertia:
- 2.31 kg.cm²
- Shaft Diameter:
- 19 mm
- Stator Inductance:
- 13.5 mH
- Centring Collar Diameter:
- 95 mm
- Speed Feedback Resolution:
- 262144 points/turn
- Encoder Type:
- absolute single turn Hiperface DSL
- Back Emf Constant:
- 77 V/krpm 20 °C
- Maximum Mechanical Speed:
- 6000 rpm
- Circle Diameter Of The Mounting Holes:
- 115 mm
- Catalog:
- View
- Datasheet:
- View
$1,987.50 -
Schneider Electric SH31002P1BA4100 Sh3 Motor 100.2 Key Mlt Omc Ang Ip65
Schneider Electric
$2,452.50Lexium SH3 Servo motors are designed to fit Lexium 62 and Lexium 52 servo drives, part of PacDrive 3, an automation solution for motion centric machines. The servo motor features maximum mechanical speed of 6000RPM and keyed shaft end without holding...- SKU:
- SH31002P1BA4100
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Mounting Holes Diameter:
- 9.0 mm
- Maximum Current Irms:
- 17.1 A
- Shaft Diameter:
- 19 mm
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Peak Stall Torque:
- 18.3 N.m 115...480 V three phase
- Centring Collar Diameter:
- 95 mm
- Rotor Inertia:
- 2.31 kg.cm²
- Type Of Cooling:
- natural convection
- Circularity Profile:
- N/A
- Maximum Axial Force Fa:
- 740 N
- Stator Resistance:
- 2.4 Ohm
- Nominal Output Power:
- 1090 W 230 V single phase || 1930 W 400 V three phase || 1930 W 480 V three phase
- Stator Inductance:
- 13.5 mH
- Motor Flange Size:
- 100 mm
- Mounting Support:
- international standard flange
- Holding Brake:
- without
- Length:
- 204.5 mm
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Torque Constant:
- 1.21 N.m/A 120 °C
- Shaft End:
- parallel key
- Mercury Free:
- Yes
- Pvc Free:
- Yes
- Key Width:
- 6 mm
- Maximum Radial Force Fr:
- 2960 N 2000 rpm || 2580 N 3000 rpm || 3730 N 1000 rpm
- Nominal Speed:
- 2000 rpm 230 V single phase || 4000 rpm 400 V three phase || 4800 rpm 480 V three phase
- Continuous Stall Current:
- 4.8 A
- Electrical Connection:
- rotatable right angled connector
- [Us] Rated Supply Voltage:
- 115...480 V
- Phase:
- three phase
- Maximum Mechanical Speed:
- 6000 rpm
- China Rohs Regulation:
- X
- Rohs Exemption Information:
- Yes
- Sustainable Offer Status:
- Green Premium product
- Nominal Torque:
- 5.2 N.m 230 V single phase || 4.6 N.m 400 V three phase || 4.4 N.m 480 V three phase
- Net Weight:
- 5.9 kg
- Circle Diameter Of The Mounting Holes:
- 115 mm
- Continuous Stall Torque:
- 5.8 N.m 115...480 V three phase
- Device Short Name:
- SH3.....P
- Speed Feedback Resolution:
- 262144 points/turn x 4096 turns
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Product Or Component Type:
- servo motor
- Back Emf Constant:
- 77 V/krpm 20 °C
- Number Of Mounting Holes:
- 4
- Number Of Motor Poles:
- 4
- Centring Collar Depth:
- 3.5 mm
- Range Compatibility:
- PacDrive 3
- Continuous Power:
- 1930 W
- Encoder Type:
- absolute multiturn Hiperface DSL
- Environmental Disclosure:
- ENVPEP111049EN
- Shaft Length:
- 40 mm
- Ip Degree Of Protection:
- motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
- Catalog:
- View
- Datasheet:
- View
$2,452.50 -
Schneider Electric SH31002P1BA4000 Sh3 Motor 100.2 Key Mlt Omc Ang Ip54
Schneider Electric
$2,432.50Lexium SH3 Servo motors are designed to fit Lexium 62 and Lexium 52 servo drives, part of PacDrive 3, an automation solution for motion centric machines. The servo motor features maximum mechanical speed of 6000RPM and keyed shaft end without holding...- SKU:
- SH31002P1BA4000
- Number Of Mounting Holes:
- 4
- Electrical Connection:
- straight connector
- Number Of Motor Poles:
- 4
- Mounting Holes Diameter:
- 9.0 mm
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Motor Flange Size:
- 100 mm
- Length:
- 204.5 mm
- Phase:
- three phase
- Shaft Diameter:
- 19 mm
- Torque Constant:
- 1.21 N.m/A 120 °C
- Ip Degree Of Protection:
- motor IP65 EN/IEC 60034-5 || shaft bushing without shaft seal ring IP54 EN/IEC 60034-5
- Continuous Power:
- 1930 W
- Key Width:
- 6 mm
- Mercury Free:
- Yes
- Circularity Profile:
- N/A
- Device Short Name:
- SH3.....P
- Maximum Mechanical Speed:
- 6000 rpm
- Continuous Stall Torque:
- 5.8 N.m 115...480 V three phase
- Rotor Inertia:
- 2.31 kg.cm²
- Nominal Torque:
- 5.2 N.m 230 V single phase || 4.6 N.m 400 V three phase || 4.4 N.m 480 V three phase
- Range Compatibility:
- PacDrive 3
- Pvc Free:
- Yes
- Stator Inductance:
- 13.5 mH
- Type Of Cooling:
- natural convection
- Nominal Speed:
- 2000 rpm 230 V single phase || 4000 rpm 400 V three phase || 4800 rpm 480 V three phase
- Shaft End:
- parallel key
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Mounting Support:
- international standard flange
- Circle Diameter Of The Mounting Holes:
- 115 mm
- [Us] Rated Supply Voltage:
- 115...480 V
- Shaft Length:
- 40 mm
- Maximum Axial Force Fa:
- 300 N
- China Rohs Regulation:
- X
- Centring Collar Depth:
- 3.5 mm
- Continuous Stall Current:
- 4.8 A
- Peak Stall Torque:
- 18.3 N.m 115...480 V three phase
- Nominal Output Power:
- 1090 W 230 V single phase || 1930 W 400 V three phase || 1930 W 480 V three phase
- Stator Resistance:
- 2.4 Ohm
- Holding Brake:
- without
- Speed Feedback Resolution:
- 262144 points/turn x 4096 turns
- Encoder Type:
- absolute multiturn Hiperface DSL
- Sustainable Offer Status:
- Green Premium product
- Environmental Disclosure:
- ENVPEP111049EN
- Rohs Exemption Information:
- Yes
- Maximum Current Irms:
- 17.1 A
- Product Or Component Type:
- servo motor
- Net Weight:
- 5.9 kg
- Back Emf Constant:
- 77 V/krpm 20 °C
- Maximum Radial Force Fr:
- 2660 N 1000 rpm || 2110 N 2000 rpm || 1840 N 3000 rpm
- Centring Collar Diameter:
- 95 mm
- Catalog:
- View
- Datasheet:
- View
$2,432.50
