Motion Control and Robotics

gearbox straight teeth GBX, Lexium, 40mm, reduction 8:1 , 15arc.min, 6N.m

gearbox straight teeth GBX, Lexium, 60mm, reduction 9:1 , 12arc.min, 44N.m

gearbox straight teeth GBX, Lexium, 60mm, reduction 5:1 , 10arc.min, 40N.m

gearbox straight teeth GBX, Lexium, 60mm, reduction 4:1 , 10arc.min, 38N.m

This product is part of the Lexium range, an offer of motion servo drives and servo motors. This planetary gearbox has straight teeth, lubricated for life. The gearbox external diameter is 60mm. It is a gearbox with a reduction ratio of 8/1, maximum...

This product is part of the Lexium SD3 range, an offer of planetary gearboxes for stepper motors. This planetary gearbox has straight teeth, lubricated for life. The external diameter of gearbox is 60mm. It is a gearbox with a reduction ratio of 3 1,...

gearbox straight teeth GBX, Lexium, 40mm, reduction 5:1, 15arc.min, 14N.m

motion control stepper motor drive - SD315 - pulse direction with oscillator

This product is part of the Lexium SD3 range, an offer of stepper motors for motion control. The 3-phase stepper motor drive with an integrated pulse/direction communication interface. It is a motor drive with a rated supply voltage of 24V to 48V and a...

plate for mounting on symmetrical DIN rail, Lexium SD3

FAN SET 24VDC

encoder feedback cable, Lexium SD3, between stepper drive SD3 and motor BRS3, shielded, 15m

This encoder feedback cordset enables connection between synchronous motor BRS3 and stepper drive SD3. It is equipped with one connector 12-way encoder plug for motor and one connector 12-way Molex plug for drive side. It is 5 meters shielded cable.

power cable 4x1.5mm², Lexium SD3, between stepper drive SD3 and 3 phases motor, shielded, 5m

T-slot cover, nut 8, L= 2m, 5 pieces

clamping claws, PAS41, nut 5 - 10 pieces

sensor cable L=10m, 3 pin M8 connector - 1 piece

sensor cable L=5m, 3 pin M8 connector - 1 piece

cable for trailing with circular plug-in - 1 piece

clamping claws, PAS43, nut 6 - 10 pieces