Description
STC Tension Control Clutches STC600 1.125 BORE,SPCL
View AllClose
| "Special With Precision Friction Interface (Friction Disc And Drive Disc With Mounted Friction Facing Machined To Reduce Runout ), Hub With Keyway Instead Of Spline, And Reduced Friction Facing Width To Increase Friction Interface Pressure All Of This Contributing To Less Stick/Slip At Low Air Pressures And RPMS" | |
| Features: | Three Sets Of Different Sized Actuators Provide Wide Range Of Tension Control |
| Comments: | Facing Life And Peak Energy Input Reduced 73% |
| Open Or Enclosed Design: | Open |
| Drive Arrangement: | Pilot Mount |
| Bore Size: | 1.125 in. |
| Bore Style: | Straight |
| Pilot Size: | 3.500 in. |
| Pilot Or Drive Flange Bolt Circle Data: | "6, 0.250""-20 Bolts @ 60° On A 4.000 in. Circle" |
| Length: | 6.78 in. |
| Clutch Facing Type: | Standard Coefficient |
| Clutch Facing Edge Color Code: | Red |
| Maximum # Of Calipers: | 3 |
| Maximum Clutch Continuous Thermal Dissipation: | 1.10 hp |
| Clutch Peak Thermal Input Rate: | 8.00 hp |
| Maximum Dynamic Torque With All Calipers: | 525 inlbs |
| Maximum Dynamic Torque With Large Pistons: | 240 inlbs |
| Maximum Dynamic Torque With Medium Pistons: | 180 inlbs |
| Maximum Dynamic Torque With Small Pistons: | 105 inlbs |
| Maximum Dynamic Torque: | 525 inlbs |
| Minimum Sprocket Size: | "35/52T, 40/39T, 50/31T" |
| Drive Inertia: | 18.72 lbin² |
| Shaft Inertia: | 19.15 lbin² |
| Max Rpm: | 1800 |
| Actuation/Return: | Air/Spring |
| Port Size: | 0.125 NPT Or 5/32 in. Plastic Tubing |
| Operating Range: | 1-85 psi |
| Temperature Range: | 32 - 150 °F |
| Approximate Clutch Facing Life: | 216 hphr |
| Ratings: | "CE, And RoHS" |
| Finish: | Machined Aluminum |
| Outer Diameter: | 6.00 in. |
| Shipping Weight: | 18.0 LB |
