Schneider Electric ABE7H16R21 Wir Bas 16Io Led 2B-2Leve

(No reviews yet) Write a Review
SKU:
ABE7H16R21
UPC:
3389110544961
Condition:
New
Number Of Terminal Per Channel:
2
Net Weight:
0.3 kg
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Resistance To Incandescent Wire:
750 °C IEC 60695-2-11
Tightening Torque:
0.6 N.m flat Ø 3.5 mm
Polarity Distribution:
0 V or 24 V
Sustainable Offer Status:
Green Premium product
Pin Number:
20 pins
Product Or Component Type:
passive discrete I/O sub-base
Connector Type:
HE-10
Ip Degree Of Protection:
IP2X conforming to IEC 60529
Status Led:
1 LED per channel (Green) channel status || 1 LED (Green) power ON
Resistance To Electrostatic Discharge:
4 kV contact) level 3 IEC 61000-4-2 || 8 kV air) level 3 IEC 61000-4-2
Circularity Profile:
ENVEOLI1212029EN
Shock Resistance:
15 gn 11 ms IEC 60068-2-27
Number Of Horizontal Rows:
2
Resistance To Radiated Fields:
10 V/m 26000000-1000000000 Hz)IEC 61000-4-3 level 3
Product Certifications:
DNV || CSA || UL || GL || EAC
Voltage Drop On Power Supply Fuse:
0.3 V
Fixing Mode:
by clips 35 mm symmetrical DIN rail) || by screws solid plate with fixing kit)
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Range Of Product:
Modicon ABE7
Short-Circuit Protection:
2 A internal fuse, 5 x 20 mm, fast blow PLC end)
Mercury Free:
Yes
Supply Circuit Type:
DC
Installation Category:
II IEC 60664-1
Ambient Air Temperature For Operation:
-5-60 °C IEC 61131-2
Width:
125 mm
Environmental Disclosure:
ENVPEP121229EN
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Vibration Resistance:
2 gn 10-150 Hz)IEC 60068-2-6
Connections - Terminals:
screw type terminals, 1 x 0.09...1 x 1.5 mm² AWG 28...AWG 16) flexible with cable end || screw type terminals, 1 x 0.14...1 x 2.5 mm² AWG 26...AWG 12) solid || screw type terminals, 1 x 0.14...1 x 2.5 mm² AWG 26...AWG 14) flexible without cable en
Warranty:
18 months
Ambient Air Temperature For Storage:
-40-80 °C IEC 61131-2
China Rohs Regulation:
X
Maximum Supply Current:
1.8 A
Maximum Current Per Output Common:
1.8 A
Resistance To Fast Transients:
2 kV level 3 IEC 61000-4-4
Sub-Base Type:
I/O sub-base
Number Of Channels:
16
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Rohs Exemption Information:
Yes
Pollution Degree:
2 IEC 60664-1
Current Per Channel:
0.5 A
[Ui] Rated Insulation Voltage:
2000 V
[Us] Rated Supply Voltage:
19...30 V IEC 61131-2
Catalog:
View
Datasheet:
View
  • Schneider Electric ABE7H16R21 Wir Bas 16Io Led 2B-2Leve
  • Schneider Electric ABE7H16R21 Wir Bas 16Io Led 2B-2Leve
  • Schneider Electric ABE7H16R21 Wir Bas 16Io Led 2B-2Leve
$246.00

Description

This product is part of the Modicon ABE7 range, an offer of connection sub-bases for Telefast pre-wired system. This passive connection sub-base provides 16 modularity input/output channels. It has 2 terminals per channel. It is a sub base with a maximum supply current of 1.8A and a rated supply voltage of 19V to 30V. It is furnished with screw clamp terminals for electrical connection. It is an IP2x rated product. Its dimension is 125mm (Width). It weighs 0.3kg. It is suitable for all types of industrial applications. This product is certified by GL, BV, CSA, UL, DNV and LROS. The fixing is done by clips (35mm symmetrical DIN rail) and screws (solid plate with fixing kit). Modicon ABE7 means greater simplicity to rationalise wiring in automation system equipment. Pre-wired system enabling connection and adaptation of control signals of PLC cards equipped with HE10 connectors.
View AllClose