Schneider Electric ABE7H16S43 Wir Bas 16I Fuse+Disconn.

(No reviews yet) Write a Review
SKU:
ABE7H16S43
UPC:
3389110644524
Condition:
New
Product Or Component Type:
passive discrete I/O sub-base
Resistance To Electrostatic Discharge:
4 kV contact) level 3 IEC 61000-4-2 || 8 kV air) level 3 IEC 61000-4-2
Voltage Drop On Power Supply Fuse:
0.3 V
Number Of Channels:
16
Pin Number:
20 pins
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Rohs Exemption Information:
Yes
Polarity Distribution:
24 V
Short-Circuit Protection:
1 A internal fuse, 5 x 20 mm, fast blow PLC end) || 0.125 A fuse per channel, 5 x 20 mm, fast blow output circuit)
Connections - Terminals:
screw type terminals, 1 x 0.09...1 x 1.5 mm² AWG 28...AWG 16) flexible with cable end || screw type terminals, 1 x 0.14...1 x 2.5 mm² AWG 26...AWG 12) solid || screw type terminals, 1 x 0.14...1 x 2.5 mm² AWG 26...AWG 14) flexible without cable end |
Supply Circuit Type:
DC
Height:
77 mm
Warranty:
18 months
Ambient Air Temperature For Operation:
-5-60 °C IEC 61131-2
Resistance To Fast Transients:
2 kV level 3 IEC 61000-4-4
Resistance To Radiated Fields:
10 V/m 26000000-1000000000 Hz)IEC 61000-4-3 level 3
Circularity Profile:
ENVEOLI1212029EN
Range Of Product:
Modicon ABE7
Vibration Resistance:
2 gn 10-150 Hz)IEC 60068-2-6
Current Per Channel:
0.125 A
Number Of Terminal Per Channel:
2
[Us] Rated Supply Voltage:
19...30 V IEC 61131-2
Maximum Current Per Output Common:
1.8 A
Channel Additional Information:
1 switch disconnector per channel
Maximum Voltage Drop Per Channel:
0.1 V
Status Led:
1 LED per channel (Green) channel status || 1 LED per channel (Red) blown fuse indication || 1 LED (Green) power ON
Mercury Free:
Yes
Depth:
58 mm
Number Of Horizontal Rows:
1
Resistance To Incandescent Wire:
750 °C IEC 60695-2-11
Sub-Base Type:
input sub-base
Tightening Torque:
0.6 N.m flat Ø 3.5 mm
Product Certifications:
DNV || CSA || UL || GL || EAC
Installation Category:
II IEC 60664-1
Environmental Disclosure:
ENVPEP121229EN
Ip Degree Of Protection:
IP2X conforming to IEC 60529
Width:
206 mm
Fixing Mode:
by clips 35 mm symmetrical DIN rail) || by screws solid plate with fixing kit)
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
China Rohs Regulation:
X
Ambient Air Temperature For Storage:
-40-80 °C IEC 61131-2
Maximum Supply Current:
1.8 A
Connector Type:
HE-10
Net Weight:
0.64 kg
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Shock Resistance:
15 gn 11 ms IEC 60068-2-27
Sustainable Offer Status:
Green Premium product
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
[Ui] Rated Insulation Voltage:
2000 V
Pollution Degree:
2 IEC 60664-1
$428.00

Description

This product is part of the Modicon ABE7 range, an offer of connection sub-bases for Telefast pre-wired system. This passive discrete I/O sub-base offers 1 switch disconnector per channel. It is furnished with screw clamp terminals for electrical connection. It is an IP2x rated product. The width of this product is 206mm. It weighs 0.64kg. It is suitable for all types of industrial applications. This product is certified by GL, CSA, DNV, BV, LROS, UL, GL and EAC. The fixing is done by clips (35mm symmetrical DIN rail) and screws (solid plate with fixing kit). Modicon ABE7 means greater simplicity to rationalize wiring in your automation system equipment. Pre-wired system enabling connection and adaptation of control signals of PLC cards equipped with HE10 connectors.
View AllClose