Schneider Electric ABE7P16F310 Base For 16I Ss Rels Without Com

(No reviews yet) Write a Review
SKU:
ABE7P16F310
UPC:
3389110705164
Condition:
New
Status Led:
1 LED per channel (Green) channel status || 1 LED (Green) power ON
Installation Category:
II IEC 60664-1
Rohs Exemption Information:
Yes
Width:
272 mm
[Uimp] Rated Impulse Withstand Voltage:
2.5 kV
Warranty:
18 months
Ambient Air Temperature For Storage:
-40-80 °C IEC 61131-2
Product Certifications:
GL || DNV || CSA || UL || EAC
Mercury Free:
Yes
Depth:
74 mm
Short-Circuit Protection:
1 A internal fuse, 5 x 20 mm, fast blow PLC end)
Range Of Product:
Modicon ABE7
Number Of Channels:
16
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Pollution Degree:
2 IEC 60664-1
Polarity Distribution:
volt-free
Tightening Torque:
0.6 N.m flat Ø 3.5 mm
Sub-Base Type:
input sub-base
Fixing Mode:
by clips 35 mm symmetrical DIN rail) || by screws solid plate with fixing kit)
Resistance To Fast Transients:
2 kV level 3 IEC 61000-4-4
Voltage Drop On Power Supply Fuse:
0.3 V
Ip Degree Of Protection:
IP2X conforming to IEC 60529
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Supply Circuit Type:
DC
Sustainable Offer Status:
Green Premium product
Environmental Disclosure:
ENVPEP121229EN
Product Or Component Type:
sub-base for plug-in relay
Isolation Plc/Operative Part:
yes
Shock Resistance:
15 gn 11 ms IEC 60068-2-27
Resistance To Radiated Fields:
10 V/m 26000000-1000000000 Hz)IEC 61000-4-3 level 3
Ambient Air Temperature For Operation:
-5-60 °C IEC 61131-2
[Us] Rated Supply Voltage:
19...30 V IEC 61131-2
Resistance To Electrostatic Discharge:
4 kV contact) level 3 IEC 61000-4-2 || 8 kV air) level 3 IEC 61000-4-2
Product Compatibility:
ABS7S33E || ABR7 || ABS7E
Vibration Resistance:
2 gn 10-150 Hz)IEC 60068-2-6
Height:
89 mm
Connections - Terminals:
screw type terminals, 1 x 0.09...1 x 1.5 mm², 0.09-1.5 mm² AWG 28...AWG 16) flexible with cable end || screw type terminals, 1 x 0.14...1 x 2.5 mm², 0.14-2.5 mm² AWG 26...AWG 12) solid || screw type terminals, 1 x 0.14...1 x 2.5 mm², 0.14-2.5 mm² AWG
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
[Ui] Rated Insulation Voltage:
300 V coil circuit/contact circuits IEC 60947-1 || 2000 V terminals/mounting rails
Net Weight:
0.85 kg
Circularity Profile:
ENVEOLI1212029EN
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Number Of Terminal Per Channel:
2
Resistance To Incandescent Wire:
750 °C IEC 60695-2-11
China Rohs Regulation:
X
Maximum Supply Current:
0.0416666666666667
  • Schneider Electric ABE7P16F310 Base For 16I Ss Rels Without Com
  • Schneider Electric ABE7P16F310 Base For 16I Ss Rels Without Com
  • Schneider Electric ABE7P16F310 Base For 16I Ss Rels Without Com
$653.00

Description

This product is part of the Modicon ABE7 range, an offer of connection sub bases for Telefast pre-wired system. This plug-in relay sub base offers 16 channels with 2 terminals per channel. The input sub base offers a rated supply voltage of 19V to 30V. It is furnished with screw type terminals for electrical connection. It is an IP2x rated product. Its dimensions are 272mm (width) x 74mm (depth) x 89mm (height). It weighs 0.85kg. It is suitable for all types of industrial applications. This product is certified by GL, DNV, LROS, CSA, UL, BV and EAC. It is compatible with ABS7S33E, ABR7 and ABS7E. The fixing is done by clips (35mm symmetrical DIN rail) and screws (solid plate with fixing kit). The Modicon ABE7 means greater simplicity to rationalize wiring in automation system equipment. Pre-wired system enabling connection and adaptation of control signals of PLC cards equipped with HE10 connectors.
View AllClose