Schneider Electric ABE7P16T330 Base For Em Ss Rels 16O

(No reviews yet) Write a Review
SKU:
ABE7P16T330
UPC:
3.38911E+12
Condition:
New
Short-Circuit Protection:
1 A internal fuse, 5 x 20 mm, fast blow PLC end)
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Polarity Distribution:
volt-free
Product Or Component Type:
sub-base for plug-in relay
Range Of Product:
Modicon ABE7
Vibration Resistance:
2 gn 10-150 Hz)IEC 60068-2-6
Status Led:
1 LED per channel (Green) channel status || 1 LED (Green) power ON
Connections - Terminals:
screw type terminals, 1 x 0.09...1 x 1.5 mm² AWG 28...AWG 16) flexible with cable end || screw type terminals, 1 x 0.14...1 x 2.5 mm² AWG 26...AWG 12) solid || screw type terminals, 1 x 0.14...1 x 2.5 mm² AWG 26...AWG 14) flexible without cable en
Mercury Free:
Yes
Pollution Degree:
2 IEC 60664-1
Warranty:
18 months
Number Of Channels:
16
[Uimp] Rated Impulse Withstand Voltage:
2.5 kV
China Rohs Regulation:
X
Sustainable Offer Status:
Green Premium product
Resistance To Radiated Fields:
10 V/m 26000000-1000000000 Hz)IEC 61000-4-3 level 3
Resistance To Electrostatic Discharge:
4 kV contact) level 3 IEC 61000-4-2 || 8 kV air) level 3 IEC 61000-4-2
Tightening Torque:
0.6 N.m flat Ø 3.5 mm
Supply Circuit Type:
DC
Maximum Supply Current:
0.0416666666666667
Environmental Disclosure:
ENVPEP121229EN
Rohs Exemption Information:
Yes
[Us] Rated Supply Voltage:
19...30 V IEC 61131-2
Circularity Profile:
ENVEOLI1212029EN
Installation Category:
II IEC 60664-1
Fixing Mode:
by clips 35 mm symmetrical DIN rail) || by screws solid plate with fixing kit)
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Ambient Air Temperature For Operation:
-5-60 °C IEC 61131-2
Voltage Drop On Power Supply Fuse:
0.3 V
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Ambient Air Temperature For Storage:
-40-80 °C IEC 61131-2
Product Certifications:
DNV || CSA || GL || UL || EAC
Product Compatibility:
ABE7ACC21 || ABR7S33 || ABS7SC3.. || ABS7A3.
Maximum Current Per Output Common:
16 A
Sub-Base Type:
output sub-base
Ip Degree Of Protection:
IP2X conforming to IEC 60529
[Ui] Rated Insulation Voltage:
300 V coil circuit/contact circuits IEC 60947-1 || 2000 V terminals/mounting rails
Shock Resistance:
15 gn 11 ms IEC 60068-2-27
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Resistance To Fast Transients:
2 kV level 3 IEC 61000-4-4
Resistance To Incandescent Wire:
750 °C 30 s IEC 60695-2-11
Net Weight:
0.9 kg
Datasheet:
View
  • Schneider Electric ABE7P16T330 Base For Em Ss Rels 16O
  • Schneider Electric ABE7P16T330 Base For Em Ss Rels 16O
$590.00

Description

This product is part of the Modicon ABE7 range, an offer of connection sub-bases for Telefast pre-wired system. This sub-base for plug-in relay, provides 16 channels. This product enables rapid connection of I/O modules. It is a relay sub base with a supply voltage of 19V to 30V DC and a maximum supply current of 1A. It is furnished with screw clamp terminals for electrical connection. It is an IP2x rated product. It weighs 0.9kg. It is suitable for all types of industrial applications. This product is certified by GL, CSA, DNV, BV, LROS and UL. This sub-base is suitable for use with ABE7ACC21, ABR7S33, ABS7SC3 and ABS7A3 relay. The fixing is done by clips (35mm symmetrical DIN rail) and screws (solid plate with fixing kit). Modicon ABE7 means greater simplicity to rationalise wiring in automation system equipment. Pre-wired system enabling connection and adaptation of control signals of PLC cards equipped with HE10 connectors.
View AllClose