Schneider Electric ABE7R16T111 Wir Bas 16S Em Deb Mini

(No reviews yet) Write a Review
SKU:
ABE7R16T111
UPC:
3389110250800
Condition:
New
Installation Category:
II IEC 60664-1
Maximum Current Per Module:
0
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Vibration Resistance:
2 gn 10-150 Hz)IEC 60068-2-6
Maximum Supply Current:
0.0416666666666667
Product Compatibility:
ABR7S11
Voltage Drop On Power Supply Fuse:
0.3 V
Sustainable Offer Status:
Green Premium product
Environmental Disclosure:
ENVPEP121229EN
Product Certifications:
CSA || UL || DNV || GL || EAC
Resistance To Fast Transients:
2 kV level 3 IEC 61000-4-4
Maximum Current Per Output Common:
5 A screw type terminals
Polarity Distribution:
common distribution group of 4
Connections - Terminals:
screw type terminals, 1 x 0.14...1 x 1.5 mm² AWG 26...AWG 16) flexible with cable end || screw type terminals, 1 x 0.14...1 x 2.5 mm² AWG 26...AWG 14) flexible without cable end || screw type terminals, 1 x 0.14...1 x 4 mm² AWG 26...AWG 12) solid ||
Mercury Free:
Yes
Mounting Mode:
by clips 35 mm DIN rail) || by screws surface mount with kit)
Supply Circuit Type:
DC
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Contacts Type And Composition:
1 NO
Ip Degree Of Protection:
IP2X conforming to IEC 60529
Resistance To Electrostatic Discharge:
4 kV contact) level 3 IEC 61000-4-2 || 8 kV air) level 3 IEC 61000-4-2
China Rohs Regulation:
X
Ambient Air Temperature For Operation:
-5-60 °C IEC 61131-2
Number Of Channels:
16
Sub-Base Type:
output sub-base
Circularity Profile:
ENVEOLI1212029EN
Short-Circuit Protection:
1 A internal fuse, 5 x 20 mm, fast blow PLC end)
Product Or Component Type:
sub-base with plug-in electromechanical relay
Resistance To Radiated Fields:
10 V/m 26000000-1000000000 Hz)IEC 61000-4-3 level 3
[Ui] Rated Insulation Voltage:
2000 V terminals/mounting rails || 300 V coil circuit/contact circuits IEC 60947-1
Resistance To Incandescent Wire:
750 °C 30 s IEC 60695-2-11
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Status Led:
1 LED power ON || 1 LED per channel channel status
Shock Resistance:
15 gn 11 ms IEC 60068-2-27
[Uimp] Rated Impulse Withstand Voltage:
2.5 kV
Net Weight:
0.6 kg
Pollution Degree:
2 IEC 60664-1
Tightening Torque:
0.6 N.m flat Ø 3.5 mm
Warranty:
18 months
[Us] Rated Supply Voltage:
19...30 V IEC 61131-2
Range Of Product:
Modicon ABE7
Rohs Exemption Information:
Yes
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Ambient Air Temperature For Storage:
-40-80 °C IEC 61131-2
  • Schneider Electric ABE7R16T111 Wir Bas 16S Em Deb Mini
  • Schneider Electric ABE7R16T111 Wir Bas 16S Em Deb Mini
  • Schneider Electric ABE7R16T111 Wir Bas 16S Em Deb Mini
$675.00

Description

This product is part of the Modicon ABE7 range, an offer of connection sub-bases for Telefast pre-wired system. The sub-base with plug-in electromechanical relay, provides 16 channels. It has normally opened contact. This product enables rapid connection of I/O modules. It is a relay sub base with a supply voltage of 19V to 30V DC and a maximum supply current of 1A. It is furnished with screw clamp terminals for electrical connection. It is an IP2x rated product. It weighs 0.6kg. It is suitable for all types of industrial applications. This product is certified by GL, CSA, DNV, BV, LROS and UL. This sub-base is suitable for use with ABR7S11 plug-in relay. The fixing is done by clips (35mm DIN rail) and screws (surface mount with kit). Modicon ABE7 means greater simplicity to rationalise wiring in automation system equipment. Pre-wired system enabling connection and adaptation of control signals of PLC cards equipped with HE10 connectors.
View AllClose