Schneider Electric ABLM1A24012 Power Supply 24V 1.2A Modular

(No reviews yet) Write a Review
SKU:
ABLM1A24012
UPC:
3606481500151
Condition:
New
Input Protection Type:
integrated fuse (not interchangeable) 3.15 A || external protection (recommended) 20 A Curve B || external protection (recommended) 20 A Curve C || external protection (recommended) 4 A Curve B || external protection (recommended) 4 A Curve C
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Mounting Support:
top hat type TH35-15 rail IEC 60715 || top hat type TH35-7.5 rail IEC 60715 || double-profile DIN rail || panel mounting
Line And Load Regulation:
< 0.5 % network in line || < 1 % network 0 to 100 % load
Circularity Profile:
ENVEOLI2004005EN
Range Of Product:
Modicon Power Supply
Width:
36 mm
Electromagnetic Compatibility:
immunity to electrostatic discharge - test level: 8 kV (contact discharge) conforming to IEC 61000-4-2 || immunity to electrostatic discharge - test level: 15 kV (air discharge) conforming to IEC 61000-4-2 || electromagnetic field immunity test - tes
Mercury Free:
Yes
Shock Resistance:
150 m/s² 11 ms
Electromagnetic Emission:
conducted emissions IEC 61000-6-3 || radiated emissions IEC 61000-6-4
Overvoltage Category:
II
Output Protection Type:
against overload and short-circuits automatic reset || against over temperature manual reset || against overvoltage manual reset
Environmental Disclosure:
ENVPEP2004005EN
Dielectric Strength:
3000 V AC input/output
Efficiency:
87 % 115 V AC || 87 % 230 V AC
Power Factor:
0.48 at 115 V AC || 0.38 at 230 V AC
Holding Time:
> 20 ms 115 V AC || > 60 ms 230 V AC
Service Life:
10 year(s)
Efficiency At Full Load:
90...264 V AC
Net Weight:
0.170 kg
Power Supply Output Current:
1.25 A
Ambient Air Temperature For Operation:
-25-55 °C without current derating mounting position A < 6561.68 ft (2000 m) || 55-70 °C with current derating of 2.67 % per °C mounting position A < 6561.68 ft (2000 m)
Input Voltage:
100...240 V AC single phase || 100...240 V AC phase to phase
Status Led:
1 LED (Green) output voltage
Network Frequency Limits:
50-60 Hz
Product Or Component Type:
power supply
China Rohs Regulation:
X
Meantime Between Failure [Mtbf]:
2500000 h at 25 °C, full load || 1000000 h at 55 °C, 80 % load
Output Coupling:
serial || parallel
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Inrush Current:
25 A 115 V || 50 A 230 V
Residual Ripple:
< 100 mV
Connections - Terminals:
screw connection 0.5...1.5 mm², AWG 20...AWG 16) without wire end ferrule input/output || screw connection 0.5...1 mm², AWG 20...AWG 18) with wire end ferrule input/output
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Standards:
IEC 62368-1 || EN/IEC 61010-1 || EN 61010-2-201 || EN/IEC 61204-3 || IEC 61000-6-1 || IEC 61000-6-2 || IEC 61000-6-3 || IEC 61000-6-4 || IEC 61000-3-2 || EN 61000-3-3 || UL 62368-1 || UL 61010-1 || UL 61010-2-201 || CSA C22.2 No 62368-1 || CSA C22.2
Output Voltage Limits:
24...28 V
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Enclosure Material:
Plastic
Earthing System:
TN || TT || IT
Power Dissipation In W:
5 W
Kw Rating:
30 W
Response Time:
< 2 s
Product Certifications:
CE || cUL Listed || cUL Recognized || RCM || CB Scheme || EAC || KC || NEC class 2
Supply:
SELV IEC 60950-1 || SELV IEC 60204-1 || SELV IEC 60364-4-41
Height:
91 mm
Output Voltage:
24 V DC
Vibration Resistance:
3 mm 2-9 Hz)IEC 60721-3-3 || 10 m/s² 9-200 Hz)IEC 60721-3-3
Load Capacitance:
3000 µF
Pollution Degree:
2
Power Supply Type:
regulated switch mode
Sustainable Offer Status:
Green Premium product
Rohs Exemption Information:
Yes
Operating Altitude:
< 6561.68 ft (2000 m) overvoltage category III || 2000 m...5000 m overvoltage category II
Current Consumption:
< 0.8 A 115 V AC || < 0.6 A 230 V AC
Depth:
55.6 mm
Electrical Shock Protection Class:
class II without PE connection
Maximum Leakage Current:
0.25 mA 240 V AC
Ip Degree Of Protection:
IP20
  • Schneider Electric ABLM1A24012 Power Supply 24V 1.2A Modular
  • Schneider Electric ABLM1A24012 Power Supply 24V 1.2A Modular
  • Schneider Electric ABLM1A24012 Power Supply 24V 1.2A Modular
$145.03

Description

This ABLM regulated switch mode power supply (SMPS) supplies direct current voltage. It has a rated input of 100V to 240V AC, a rated output current of 1,25A at 24V DC and a rated power output of 30W. It is ideal for supplying DC voltage necessary for automation equipment designed for applications in industrial, commercial and residential applications such as conveying, packaging, control, food & beverage, mining, oil & gas and water. It installs on omega rail or fixing by screw. Its width is 36mm, its height is 91mm, its depth is 55,6mm. It ensures a protection against overloads and short-circuits with automatic restart after the source of overload/short-circuit has been corrected. It weighs 0.170kg. It is a power supply for industrial use, rail mounting. It conforms to EN62368-1, ENIEC61010-1/2-201, ENIEC61204-3, EN61000-6-1/2/3/4, EN61000-3-2-3, UL62368-1, UL61010-2-201/-1-201, CSAC22.2No62368-1/No61010-2-201/No61010-1 standards, and certified by CE, CUL listed/recognized, RCM, CBscheme. The Acti9 iC60 range of Miniature Circuit Breakers is recommanded for its protection. The type of protection is 4A, B or C-curve. It has in the front face a LED indicating presence of DC output voltage, and a QR code for access to the latest technical documentation. Thanks to their modular housing, they can be installed either in enclosures or industrial panels by clipping on omega (DIN) rail. It brings energy to your automated systems. Designed for simple machines and applications, modular power supplies are primarily appreciated for their extreme compactness.
View AllClose