Schneider Electric ABLP1A24045 Power Supply 24V 4.5A Panel Mount

(No reviews yet) Write a Review
SKU:
ABLP1A24045
UPC:
3606481500281
Condition:
New
Rohs Exemption Information:
Yes
Inrush Current:
45 A 115 V || 85 A 230 V
Status Led:
1 LED (Green) output voltage
Line And Load Regulation:
< 0.5 % network 0 to 100 % load at 25 °C || < 1 % network full voltage range in line at 25 °C
Circularity Profile:
ENVEOLI2007017EN
Operating Altitude:
5000 m
Connections - Terminals:
screw connection 0.75...2.5 mm², AWG 18...AWG 14) without wire end ferrule || screw connection 0.75...1.5 mm², AWG 18...AWG 16) with wire end ferrule
Standards:
IEC 62368-1 || IEC 61010-1 || EN 61010-2-201 || EN 61204-3 || IEC 61000-6-1 || IEC 61000-6-2 || IEC 61000-6-3 || IEC 61000-6-4 || IEC 61000-3-2 || EN 61000-3-3 || UL 62368-1 || UL 61010-1 || UL 61010-2-201 || CSA C22.2 No 62368-1 || CSA C22.2 No 6101
Residual Ripple:
< 150 mV
Load Capacitance:
4000 µF
Output Protection Type:
against overload and short-circuits automatic reset || against over temperature manual reset || against overvoltage manual reset
Maximum Leakage Current:
1 mA 240 V AC
Mercury Free:
Yes
Meantime Between Failure [Mtbf]:
700000 h at 25 °C, full load conforming to SR 332
Net Weight:
0.3 kg
Input Protection Type:
integrated fuse (not interchangeable) 4 A
Network Frequency Limits:
50-60 Hz
Product Certifications:
CE || cULus || EAC || RCM || CB Scheme || KC
Ambient Air Temperature For Operation:
-30-50 °C without derating mounting position A, B, F, G < 6561.68 ft (2000 m) || 50-70 °C with current derating of 2 % per °C mounting position A, B, F, G < 6561.68 ft (2000 m)
Earthing System:
TN || TT || IT
Electrical Shock Protection Class:
class I
Power Supply Type:
regulated switch mode
Shock Resistance:
150 m/s² 11 ms
Response Time:
< 500 ms
Electromagnetic Compatibility:
immunity to electrostatic discharge - test level: 8 kV (contact discharge) conforming to IEC 61000-4-2 || immunity to electrostatic discharge - test level: 15 kV (air discharge) conforming to IEC 61000-4-2 || immunity to conducted RF disturbances - t
Width:
97 mm
Product Or Component Type:
power supply
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Environmental Disclosure:
ENVPEP2007017EN
Depth:
129 mm
Range Of Product:
Modicon Power Supply
Output Voltage Limits:
21.6...26.4 V
Kw Rating:
100 W
Dielectric Strength:
3750 V AC with input to output
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Supply:
SELV IEC 60950-1 || SELV IEC 60204-1 || SELV IEC 60364-4-41
Efficiency At Full Load:
90...264 V AC
Height:
30 mm
Overvoltage Category:
II
Output Voltage:
24 V DC
Electromagnetic Emission:
conducted emissions IEC 61000-6-3 || radiated emissions IEC 61000-6-4
Ip Degree Of Protection:
IP10
Current Consumption:
< 2.3 A 115 V AC || < 1.5 A 230 V AC
Mounting Support:
top hat type TH35-15 rail IEC 60715 || top hat type TH35-7.5 rail IEC 60715 || double-profile DIN rail || panel mounting
Sustainable Offer Status:
Green Premium product
Service Life:
10 year(s)
China Rohs Regulation:
X
Holding Time:
> 20 ms 115 V AC || > 40 ms 230 V AC
Input Voltage:
100...240 V AC single phase
Enclosure Material:
Aluminum
Output Coupling:
parallel || serial
Pollution Degree:
2
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Power Factor:
0.55 at 115 V AC || 0.45 at 230 V AC
Efficiency:
89 % 230 V AC
Power Supply Output Current:
4.5 A
Power Dissipation In W:
20 W
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Vibration Resistance:
3 mm 2-9 Hz)IEC 60068-2-6 || 10 m/s² 9-200 Hz)IEC 60068-2-6
$93.00

Description

This Modicon ABLP regulated switch mode power supply (SMPS) supplies direct current voltage. It has a rated input of 100V to 240V AC, a rated output current of 4.5A at 24V DC and a rated power of 100W. It is ideal for supplying DC voltage necessary for automation equipment designed for applications in industrial, commercial and residential applications such as conveying, packaging, control, food & beverage, mining, oil & gas and water. It provides a protection against overloads and short-circuits with automatic restart after the source of overload/short-circuit has been corrected It has LED diagnostics indicator available in the front for troubleshooting instantly. Its width is 97mm, its height is 30mm, its depth is 129mm. It weighs 0.300kg. It is certified with CB-Scheme, cULus Listed, cURus recognized, RCM and EAC. It is a power supply for commercial use, panel mount; It is compatible with ABLPA01 mounting plate. It installs on panel on side or on base with mounting plate fixing by screw. ABLP power supplies bring energy to your automated systems. ABLP power supplies are designed for simple and repetitive machines, dedicated power supplies are particularly quality/price competitive due to their simplicity and compactness. The main applications to use Modicon ABLP power supply are lifts, display panels, escalators, carwash, foodstuff ovens, etc.
View AllClose

Related Products

Related Products