Schneider Electric

Schneider Electric ABLS1A24021 Power Supply 24V 2.1A 1Ph Optimized

(No reviews yet) Write a Review
SKU:
ABLS1A24021
UPC:
3606481500182
Condition:
New
Power Supply Output Current:
2.1 A
Output Coupling:
parallel || serial
Power Factor:
0.45 at 115 V AC || 0.35 at 230 V AC
Residual Ripple:
< 75 mV
Electrical Shock Protection Class:
class I
Product Certifications:
CE || cUL Listed || cUL Recognized || RCM || CB Scheme || EAC || KC || NEC class 2
Inrush Current:
35.0 A 115 V || 75.0 A 230 V
Electromagnetic Compatibility:
immunity to electrostatic discharge - test level: 8 kV (contact discharge) conforming to IEC 61000-4-2 || immunity to electrostatic discharge - test level: 15 kV (air discharge) conforming to IEC 61000-4-2 || immunity to conducted RF disturbances - t
Ip Degree Of Protection:
IP20
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Mounting Support:
top hat type TH35-15 rail IEC 60715 || top hat type TH35-7.5 rail IEC 60715 || double-profile DIN rail
Width:
30 mm
Status Led:
1 LED (Green) output voltage
Power Dissipation In W:
7.5 W
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Output Protection Type:
against overload and short-circuits automatic reset || against over temperature manual reset || against overvoltage manual reset
Standards:
IEC 62368-1 || EN/IEC 61204-3 || IEC 61000-6-1 || IEC 61000-6-2 || IEC 61000-6-3 || IEC 61000-6-4 || IEC 61000-3-2 || EN 61000-3-3 || UL 62368-1 || CSA C22.2 No 62368-1 || UL 508 || CSA C22.2 No. 107.1 || EN/IEC 62368-1
Sustainable Offer Status:
Green Premium product
China Rohs Regulation:
X
Input Protection Type:
integrated fuse (not interchangeable) 3.15 A || external protection (recommended) 20 A Curve C || external protection (recommended) 10 A Curve B || external protection (recommended) 6 A Curve C
Output Voltage:
24 V DC
Pollution Degree:
2
Height:
75 mm
Kw Rating:
50 W
Enclosure Material:
Plastic
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Input Voltage:
100...240 V AC single phase || 100...240 V AC phase to phase
Depth:
89.5 mm
Holding Time:
> 20 ms 100 V AC || > 100 ms 230 V AC
Operating Altitude:
< 6561.68 ft (2000 m)
Supply:
SELV IEC 60950-1 || SELV IEC 60204-1 || SELV IEC 60364-4-41
Line And Load Regulation:
< 0.5 % network 0 to 100 % load at 25 °C || < 1 % network full voltage range in line at 25 °C
Overvoltage Category:
II
Range Of Product:
Modicon Power Supply
Meantime Between Failure [Mtbf]:
2000000 h at 25 °C, full load conforming to SR 332 || 900000 h at 55 °C, 80 % load conforming to SR 332
Circularity Profile:
ENVEOLI2001002EN
Electromagnetic Emission:
conducted emissions IEC 61000-6-3 || radiated emissions IEC 61000-6-4
Rohs Exemption Information:
Yes
Environmental Disclosure:
ENVPEP2001002EN
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Product Or Component Type:
power supply
Connections - Terminals:
screw connection 0.5...2.5 mm², AWG 20...AWG 14) input/output
Output Voltage Limits:
24...28 V
Earthing System:
TN || TT || IT
Shock Resistance:
150 m/s² 11 ms
Current Consumption:
< 1.1 A 115 V AC || < 0.65 A 230 V AC
Mercury Free:
Yes
Dielectric Strength:
3000 V AC with input to output
Load Capacitance:
3000 µF
Efficiency At Full Load:
85...264 V AC
Efficiency:
86 % 115 V AC || 88 % 230 V AC
Response Time:
< 3 s
Net Weight:
0.180 kg
Vibration Resistance:
3 mm 2-9 Hz)IEC 60068-2-6 || 10 m/s² 9-200 Hz)IEC 60068-2-6
Power Supply Type:
regulated switch mode
Network Frequency Limits:
50-60 Hz
Maximum Leakage Current:
1 mA 240 V AC
Service Life:
10 year(s)
Ambient Air Temperature For Operation:
-20--10 °C with current derating of 2 % per °C mounting position A < 6561.68 ft (2000 m) || -10-55 °C without derating mounting position A < 6561.68 ft (2000 m) || 55-70 °C with current derating of 3.33 % per °C mounting position A < 6561.68 ft
Catalog:
View
Datasheet:
View
$110.00

Description

This ABLS regulated switch mode power supply (SMPS) supplies direct current voltage. It has a rated input of 100V to 240V AC, a rated output current of 2,1A at 24V DC and a rated power output of 50W. It is ideal for supplying DC voltage necessary for automation equipment designed for applications in industrial, commercial and residential applications such as conveying, packaging, control, food & beverage, mining, oil & gas and water. It installs on omega rail or fixing by screw. Its width is 30mm, its height is 75mm, its depth is 89,5mm. It ensures a protection against overloads and short-circuits with automatic restart after the source of overload/short-circuit has been corrected. It weighs 0.180kg. It is a power supply for industrial use, rail mounting. It conforms to EN62368-1, ENIEC61010-1/2-201, ENIEC61204-3, EN61000-6-1/2/3/4, EN61000-3-2-3, UL62368-1, UL61010-2-201/-1-201, CSAC22.2No62368-1/No61010-2-201/No61010-1 standards, and certified by CE, CUL listed/recognized, RCM, CBscheme. The Acti9 iC60 range of Miniature Circuit Breakers is recommanded for its protection. The type of protection is 6A, C curve or 10A, B-curve. It has in the front face a LED indicating presence of DC output voltage, and a QR code for access to the latest technical documentation. Thanks to its compact housing, it can be installed either in enclosures or industrial panels by clipping on omega (DIN) rail. It brings energy to your automated systems. Designed for simple machines and applications, modular power supplies are primarily appreciated for their extreme compactness.
View AllClose