Schneider Electric ABLS1A24038 Power Supply 24V 3.8A 1Ph Optimized

(No reviews yet) Write a Review
SKU:
ABLS1A24038
UPC:
3606481500212
Condition:
New
Load Capacitance:
3000 µF
Mounting Support:
top hat type TH35-15 rail IEC 60715 || top hat type TH35-7.5 rail IEC 60715 || double-profile DIN rail
Height:
75 mm
Power Factor:
0.90 at 115 V AC || 0.85 at 230 V AC
Mercury Free:
Yes
Ambient Air Temperature For Operation:
-20--10 °C with current derating of 2 % per °C mounting position A < 6561.68 ft (2000 m) || -10-55 °C without derating mounting position A < 6561.68 ft (2000 m) || 55-70 °C with current derating of 3.33 % per °C mounting position A < 6561.68 ft
Shock Resistance:
150 m/s² 11 ms
Enclosure Material:
Plastic
Vibration Resistance:
3 mm 2-9 Hz)IEC 60068-2-6 || 10 m/s² 9-200 Hz)IEC 60068-2-6
Power Supply Type:
regulated switch mode
Power Dissipation In W:
13 W
Input Protection Type:
integrated fuse (not interchangeable) 3.15 A || external protection (recommended) 20 A Curve C || external protection (recommended) 10 A Curve B || external protection (recommended) 6 A Curve C
Depth:
100 mm
Sustainable Offer Status:
Green Premium product
Service Life:
10 year(s)
Response Time:
< 3 s
Inrush Current:
45.0 A 115 V || 70.0 A 230 V
Range Of Product:
Modicon Power Supply
Rohs Exemption Information:
Yes
Ip Degree Of Protection:
IP20
Efficiency At Full Load:
85...264 V AC
Maximum Leakage Current:
1 mA 240 V AC
Output Voltage Limits:
24 V
Net Weight:
0.325 kg
Overvoltage Category:
II
Earthing System:
TN || TT || IT
Residual Ripple:
< 75 mV
Current Consumption:
< 1.2 A 115 V AC || < 0.6 A 230 V AC
Connections - Terminals:
screw connection 0.5...2.5 mm², AWG 20...AWG 14) input/output
Kw Rating:
91.2 W
Environmental Disclosure:
ENVPEP2001002EN
Supply:
SELV IEC 60950-1 || SELV IEC 60204-1 || SELV IEC 60364-4-41
Product Or Component Type:
power supply
Output Voltage:
24 V DC
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Electromagnetic Compatibility:
immunity to electrostatic discharge - test level: 8 kV (contact discharge) conforming to IEC 61000-4-2 || immunity to electrostatic discharge - test level: 15 kV (air discharge) conforming to IEC 61000-4-2 || immunity to conducted RF disturbances - t
China Rohs Regulation:
X
Holding Time:
> 20 ms 100 V AC || > 50 ms 230 V AC
Output Protection Type:
against overload and short-circuits automatic reset || against over temperature manual reset || against overvoltage manual reset
Output Coupling:
serial
Product Certifications:
CE || cUL Listed || cUL Recognized || RCM || CB Scheme || EAC || KC || NEC class 2
Electromagnetic Emission:
conducted emissions IEC 61000-6-3 || radiated emissions IEC 61000-6-4
Pollution Degree:
2
Width:
45 mm
Power Supply Output Current:
3.8 A
Standards:
IEC 62368-1 || EN/IEC 61204-3 || IEC 61000-6-1 || IEC 61000-6-2 || IEC 61000-6-3 || IEC 61000-6-4 || IEC 61000-3-2 || EN 61000-3-3 || UL 62368-1 || CSA C22.2 No 62368-1 || UL 508 || CSA C22.2 No. 107.1 || EN/IEC 62368-1
Input Voltage:
100...240 V AC single phase || 100...240 V AC phase to phase
Circularity Profile:
ENVEOLI2001002EN
Line And Load Regulation:
< 1 % network 0 to 100 % load at 25 °C || < 2 % network full voltage range in line at 25 °C
Electrical Shock Protection Class:
class I
Meantime Between Failure [Mtbf]:
1500000 h at 25 °C, full load conforming to SR 332 || 600000 h at 55 °C, 80 % load conforming to SR 332
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Dielectric Strength:
3000 V AC with input to output
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Efficiency:
87 % 115 V AC || 89 % 230 V AC
Network Frequency Limits:
50-60 Hz
Status Led:
1 LED (Green) output voltage
Operating Altitude:
< 6561.68 ft (2000 m)
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Catalog:
View
Datasheet:
View
  • Schneider Electric ABLS1A24038 Power Supply 24V 3.8A 1Ph Optimized
  • Schneider Electric ABLS1A24038 Power Supply 24V 3.8A 1Ph Optimized
  • Schneider Electric ABLS1A24038 Power Supply 24V 3.8A 1Ph Optimized
$160.00

Description

This ABLS regulated switch mode power supply (SMPS) supplies direct current voltage. It has a rated input of 100V to 240V AC, a rated output current of 3,8A at 24V DC and a rated power output of 91,2W. It is ideal for supplying DC voltage necessary for automation equipment designed for applications in industrial, commercial and residential applications such as conveying, packaging, control, food & beverage, mining, oil & gas and water. It installs on omega rail or fixing by screw. Its width is 45mm, its height is 75mm, its depth is 100mm. It ensures a protection against overloads and short-circuits with automatic restart after the source of overload/short-circuit has been corrected. It weighs 0.325kg. It is a power supply for industrial use, rail mounting. It conforms to EN62368-1, ENIEC61010-1/2-201, ENIEC61204-3, EN61000-6-1/2/3/4, EN61000-3-2-3, UL62368-1, UL61010-2-201/-1-201, CSAC22.2No62368-1/No61010-2-201/No61010-1 standards, and certified by CE, CUL listed/recognized, RCM, CBscheme. The Acti9 iC60 range of Miniature Circuit Breakers is recommanded for its protection. The type of protection is 6A, C curve or 10A, B-curve. It has in the front face a LED indicating presence of DC output voltage, and a QR code for access to the latest technical documentation. Thanks to its compact housing, it can be installed either in enclosures or industrial panels by clipping on omega (DIN) rail. It brings energy to your automated systems. Designed for simple machines and applications, modular power supplies are primarily appreciated for their extreme compactness.
View AllClose