Schneider Electric ATS01N106FT Soft Starter 6A 110 480V

(No reviews yet) Write a Review
SKU:
ATS01N106FT
UPC:
3.38911E+12
Condition:
New
Discrete Output Current:
2 A DC-13 || 3 A AC-15
Pollution Degree:
2 EN/IEC 60947-4-2
Ip Degree Of Protection:
IP20
Starting Time:
1 s / 100 || 5 s / 20 || adjustable from 1 to 5 s
Output Voltage:
<= power supply voltage
Network Frequency:
47.5...63 Hz
Height:
100 mm
Type Of Start:
start with voltage ramp
Function Available:
integrated bypass
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Rohs Exemption Information:
Yes
Device Short Name:
ATS01
Compatibility Code:
ATS01N1
Product Certifications:
C-tick || CCC || CSA || B44.1-96/ASME A17.5 for starter wired to the motor delta terminal || UL || GOST
Net Weight:
0.16 kg
Operating Position:
vertical +/- 10 degree
Phase:
1 phase
Supply Voltage Limits:
99-528 V
Relative Humidity:
5-95 % without condensation or dripping water EN/IEC 60068-2-3
Electromagnetic Compatibility:
conducted and radiated emissions level B CISPR 11 || conducted and radiated emissions level B IEC 60947-4-2 || damped oscillating waves level 3 IEC 61000-4-12 || electrostatic discharge level 3 IEC 61000-4-2 || EMC immunity level 3 EN 50082-1 || EMC
Shock Resistance:
15 gn 11 ms EN/IEC 60068-2-27
Power Range:
0.55-1 kW 200-240 V 3 phase || 1.1-2 kW 380-440 V 3 phase || 0.55-1 kW 200-240 V 1 phase || 1.1-2 kW 200-240 V 3 phase || 2.2-3 kW 380-440 V 3 phase
Motor Power Kw:
3 kW, 3 phase 400 V || 0.75 kW, 3 phase 230 V || 1.1 kW, 3 phase 230 V || 2.2 kW, 3 phase 400 V || 0.75 kW, 1 phase 230 V
Icl Starter Rating:
0.25
Starting Torque:
30...80 % of starting torque of motor connected directly on the line supply
Electrical Connection:
cage type connector - rigid 1 2.5 mm² AWG 14 control circuit || cage type connector - rigid with cable end 1 2.5 mm² AWG 14 power circuit || cage type connector - rigid without cable end 2 1 mm² AWG 17 control circuit || cage type connector - rigid w
Vibration Resistance:
1 gn 13-150 Hz)EN/IEC 60068-2-6 || 1.5 mm peak to peak 3-13 Hz)EN/IEC 60068-2-6
Range Of Product:
Altistart 01
Maximum Horse Power Rating:
1 hp, 3 phase 230 V || 2 hp, 3 phase 460 V || 3 hp, 3 phase 460 V || 0.5 hp, 3 phase 210 V || 1.5 hp, 3 phase 230 V
Assembly Style:
with heat sink
Current Consumption:
30 A at nominal load
Power Dissipation In W:
1 W at full load and at end of starting || 31 W in transient state
Width:
23 mm
Motor Starter Type:
soft starter
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Product Destination:
asynchronous motors
Warranty:
18 months
Ambient Air Temperature For Storage:
-25-70 °C EN/IEC 60947-4-2
Operating Altitude:
<= 3280.84 ft (1000 m) without derating || > 3280.84 ft (1000 m) with current derating of 2.2 % per additional 100 m
Product Or Component Type:
soft starter
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Standards:
EN/IEC 60947-4-2
Depth:
100 mm
Marking:
CE
Tightening Torque:
0.8-0.8 N.m
Ambient Air Temperature For Operation:
-10-40 °C without derating) || 40-50 °C with current derating of 2 % per °C)
Mercury Free:
Yes
[Us] Rated Supply Voltage:
110...480 V - 10...10 %
Toxic Heavy Metal Free:
Yes
[Uc] Control Circuit Voltage:
110 V AC +/- 10 % 30 mA || 24 V AC/DC +/- 10 % 25 mA || 240 V AC +/- 10 % 65 mA
Product Specific Application:
simple machine
Reach Free Of Svhc:
Yes
Supply Frequency:
50...60 Hz - 5...5 %
Utilisation Category:
AC-53B EN/IEC 60947-4-2
China Rohs Regulation:
X
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
  • Schneider Electric ATS01N106FT Soft Starter 6A 110 480V
  • Schneider Electric ATS01N106FT Soft Starter 6A 110 480V
$138.00

Description

This Altistart 01 soft starter is DIN rail mounted and can feed single or 3-phase asynchronous motors with a rating up to 6A. This Altistart 01 can be used for a motor rated power up to 3kW or 3hp for 3-phase (110V to 480V AC) and up to 0.75kW for single phase (110V to 230V AC). This DIN rail mounted soft starter is designed to enable smooth start for simple machines such as conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It is 22.5mm wide, this makes it one of the smallest soft starters on the market; it can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Simple setup with only 2 settings: possible to configure by non-specialists. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.
View AllClose