Schneider Electric ATS01N112FT Soft-Starter 12A 110 480V
Schneider Electric
$174.00
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric ATS01N112FT Soft-Starter 12A 110 480V
$1200 Minimum Order for Non-stock Items or $60 Addl Schneider Handling Fee Applies
This Altistart 01 soft starter is DIN rail mounted and can feed single or 3-phase asynchronous motors with a rating up to 12A. This Altistart 01 can be used for a motor rated power up to 5.5kW or 7.5hp for 3-phase (110V to 480V AC) and up to 1.5kW for single phase (110V to 230V AC). This DIN rail mounted soft starter is designed to enable smooth start for simple machines such as conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It is 45mm wide, this makes it one of the smallest soft starters on the market; it can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Simple setup with only 2 settings: possible to configure by non-specialists. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.
- Range Of Product:
- Altistart 01
- Net Weight:
- 0.28 kg
- Relative Humidity:
- 5-95 % without condensation or dripping water EN/IEC 60068-2-3
- Pollution Degree:
- 2 EN/IEC 60947-4-2
- Discrete Output Current:
- 2 A DC-13 || 3 A AC-15
- Electromagnetic Compatibility:
- conducted and radiated emissions level B CISPR 11 || conducted and radiated emissions level B IEC 60947-4-2 || damped oscillating waves level 3 IEC 61000-4-12 || electrostatic discharge level 3 IEC 61000-4-2 || EMC immunity level 3 EN 50082-1 || EMC
- Phase:
- 1 phase
- Ambient Air Temperature For Operation:
- -10-40 °C without derating) || 40-50 °C with current derating of 2 % per °C)
- Product Specific Application:
- simple machine
- [Us] Rated Supply Voltage:
- 110...480 V - 10...10 %
- Operating Position:
- vertical +/- 10 degree
- Power Range:
- 1.1-2 kW 200-240 V 1 phase || 2.2-3 kW 200-240 V 3 phase || 4-6 kW 380-440 V 3 phase
- Operating Altitude:
- <= 3280.84 ft (1000 m) without derating || > 3280.84 ft (1000 m) with current derating of 2.2 % per additional 100 m
- Reach Regulation:
- Free of Substances of Very High Concern above the threshold
- Shock Resistance:
- 15 gn 11 ms EN/IEC 60068-2-27
- [Uc] Control Circuit Voltage:
- 110 V AC +/- 10 % 35 mA || 24 V AC/DC +/- 10 % 30 mA || 240 V AC +/- 10 % 80 mA
- Tightening Torque:
- 1.9-2.5 N.m || 0.5-0.5 N.m
- Mercury Free:
- Yes
- Icl Starter Rating:
- 0
- Ip Degree Of Protection:
- IP20
- Product Certifications:
- B44.1-96/ASME A17.5 for starter wired to the motor delta terminal || C-tick || CCC || UL || CSA || GOST
- Product Or Component Type:
- soft starter
- Device Short Name:
- ATS01
- Warranty:
- 18 months
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Output Voltage:
- <= power supply voltage
- Supply Frequency:
- 50...60 Hz - 5...5 %
- Maximum Horse Power Rating:
- 3 hp, 3 phase 230 V || 1.5 hp, 3 phase 210 V || 7.5 hp, 3 phase 460 V
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Depth:
- 131 mm
- Function Available:
- integrated bypass
- Electrical Connection:
- 4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit || screw connector - rigid without cable end 1 0.5...2.5 mm² AWG 14 control circuit || 4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit || screw connector - rigid
- Power Dissipation In W:
- 1 W at full load and at end of starting || 61 W in transient state
- Starting Time:
- 1 s / 100 || 5 s / 20 || adjustable from 1 to 5 s
- Reach Free Of Svhc:
- Yes
- Vibration Resistance:
- 1 gn 13-150 Hz)EN/IEC 60068-2-6 || 1.5 mm peak to peak 3-13 Hz)EN/IEC 60068-2-6
- Motor Starter Type:
- soft starter
- Type Of Start:
- start with voltage ramp
- Supply Voltage Limits:
- 99-528 V
- Network Frequency:
- 47.5...63 Hz
- Marking:
- CE
- Toxic Heavy Metal Free:
- Yes
- Current Consumption:
- 60 A at nominal load
- Product Destination:
- asynchronous motors
- Rohs Exemption Information:
- Yes
- Width:
- 45 mm
- Ambient Air Temperature For Storage:
- -25-70 °C EN/IEC 60947-4-2
- Standards:
- EN/IEC 60947-4-2
- Compatibility Code:
- ATS01N1
- Height:
- 124 mm
- Assembly Style:
- with heat sink
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Starting Torque:
- 30...80 % of starting torque of motor connected directly on the line supply
- China Rohs Regulation:
- X
- Utilisation Category:
- AC-53B EN/IEC 60947-4-2
- Motor Power Kw:
- 2.2 kW, 3 phase 230 V || 5.5 kW, 3 phase 400 V || 1.5 kW, 1 phase 230 V
- Catalog:
- View
- Datasheet:
- View
