Schneider Electric ATS01N209LU Soft-Start Stop 9A 200 240V
Schneider Electric
$196.99
$1200 Minimum Order for Non-stock Items or $60 Addl Schneider Handling Fee Applies
This Altistart 01 soft starter is DIN rail mounted and can feed 3-phase asynchronous motors with a rating up to 9A. This Altistart 01 can be used for a motor rated power up to 1.5kW or 2hp for 3-phase (200V to 240V AC). This DIN rail mounted soft starter is designed to enable smooth start for simple machines such as conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It is 45mm wide, this makes it one of the smallest soft starters on the market, it can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Simple setup with only 2 settings, possible to configure by non-specialists. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.
- China Rohs Regulation:
- X
- Maximum Horse Power Rating:
- 2 hp, 3 phase 200...240 V
- Supply Frequency:
- 50...60 Hz - 5...5 %
- Assembly Style:
- with heat sink
- Shock Resistance:
- 15 gn 11 ms EN/IEC 60068-2-27
- Reach Regulation:
- Free of Substances of Very High Concern above the threshold
- Operating Altitude:
- <= 3280.84 ft (1000 m) without derating || > 3280.84 ft (1000 m) with current derating of 2.2 % per additional 100 m
- Product Specific Application:
- simple machine
- Marking:
- CE
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Discrete Output Voltage:
- 24 V 6...30 V) open collector logic
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Discrete Input Voltage:
- 24...40 V
- Product Destination:
- asynchronous motors
- Phase:
- 3 phase
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Height:
- 124 mm
- Icl Starter Rating:
- 0.375
- Relative Humidity:
- 5-95 % without condensation or dripping water EN/IEC 60068-2-3
- Current Consumption:
- 45 A at nominal load
- Toxic Heavy Metal Free:
- Yes
- Discrete Input Logic:
- positive LI1, LI2, BOOST < 5 V <= 0.2 mA > 13 V, >= 0.5 mA
- Maximum Switching Current:
- relay outputs 2 A 250 V AC cos phi = 0.5 20 ms inductive || relay outputs 2 A 30 V DC cos phi = 0.5 20 ms inductive
- Supply Voltage Limits:
- 180-264 V
- Product Certifications:
- GOST || CSA || C-tick || UL || B44.1-96/ASME A17.5 for starter wired to the motor delta terminal || CCC
- Minimum Switching Current:
- 10 mA 6 V DC relay outputs
- Display Type:
- 1 LED Green)starter powered up || 1 LED Yellow)nominal voltage reached
- Starting Torque:
- 30...80 % of starting torque of motor connected directly on the line supply
- Width:
- 45 mm
- Starting Time:
- 1 s / 100 || 5 s / 20 || 10 s / 10 || adjustable from 1 to 10 s
- [Us] Rated Supply Voltage:
- 200...240 V - 10...10 %
- Output Voltage:
- <= power supply voltage
- Net Weight:
- 0.42 kg
- Deceleration Time Symb:
- adjustable from 1 to 10 s
- Reach Free Of Svhc:
- Yes
- Rohs Exemption Information:
- Yes
- Ambient Air Temperature For Operation:
- -10-40 °C without derating) || 40-50 °C with current derating of 2 % per °C)
- Discrete Input Type:
- logic LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm
- Tightening Torque:
- 1.9-2.5 N.m || 0.5-0.5 N.m
- Range Of Product:
- Altistart 01
- Motor Power Kw:
- 1.5 kW, 3 phase 200...240 V
- Type Of Start:
- start with voltage ramp
- Electromagnetic Compatibility:
- conducted and radiated emissions level B CISPR 11 || conducted and radiated emissions level B IEC 60947-4-2 || damped oscillating waves level 3 IEC 61000-4-12 || electrostatic discharge level 3 IEC 61000-4-2 || EMC immunity level 3 EN 50082-1 || EMC
- Electrical Connection:
- 4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit || screw connector - rigid without cable end 1 0.5...2.5 mm² AWG 14 control circuit || 4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit || screw connector - rigid
- Network Frequency:
- 47.5...63 Hz
- Compatibility Code:
- ATS01N2
- Ip Degree Of Protection:
- IP20
- Power Dissipation In W:
- 4 W at full load and at end of starting || 94 W in transient state
- Ambient Air Temperature For Storage:
- -25-70 °C EN/IEC 60947-4-2
- Standards:
- EN/IEC 60947-4-2
- Depth:
- 131 mm
- Discrete Output Current:
- 2 A DC-13 || 3 A AC-15
- Pollution Degree:
- 2 EN/IEC 60947-4-2
- [Uc] Control Circuit Voltage:
- built into the starter
- Device Short Name:
- ATS01
- Mercury Free:
- Yes
- Power Range:
- 1.1-2 kW 200-240 V 3 phase
- Operating Position:
- vertical +/- 10 degree
- Motor Starter Type:
- soft starter
- Utilisation Category:
- AC-53B EN/IEC 60947-4-2
- Vibration Resistance:
- 1 gn 13-150 Hz)EN/IEC 60068-2-6 || 1.5 mm peak to peak 3-13 Hz)EN/IEC 60068-2-6
- Function Available:
- integrated bypass
- Warranty:
- 18 months
- Product Or Component Type:
- soft starter
- Discrete Output Type:
- open collector logic LO1 end of starting signal || relay outputs R1A, R1C NO
- Catalog:
- View
- Datasheet:
- View
