Schneider Electric ATS01N232QN Soft-Start Stop 32A 380 415V
Schneider Electric
$360.00
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric ATS01N232QN Soft-Start Stop 32A 380 415V
$1200 Minimum Order for Non-stock Items or $60 Addl Schneider Handling Fee Applies
This Altistart 01 soft starter is DIN rail mounted and can feed 3-phase asynchronous motors with a rating up to 32A. This Altistart 01 can be used for a motor rated power up to 7.5kW or 10hp for 3-phase (200V to 240V AC). This DIN rail mounted soft starter is designed to enable smooth start for simple machines such as conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It is 45mm wide, this makes it one of the smallest soft starters on the market; it can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Simple setup with only 2 settings: possible to configure by non-specialists. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.
- Utilisation Category:
- AC-53B EN/IEC 60947-4-2
- Discrete Output Voltage:
- 24 V 6...30 V) open collector logic
- Vibration Resistance:
- 1 gn 13-150 Hz)EN/IEC 60068-2-6 || 1.5 mm peak to peak 3-13 Hz)EN/IEC 60068-2-6
- Tightening Torque:
- 0.5-0.5 N.m || 1.9-2.5 N.m
- Motor Starter Type:
- soft starter
- Range Of Product:
- Altistart 01
- Ambient Air Temperature For Operation:
- -10-40 °C without derating) || 40-50 °C with current derating of 2 % per °C)
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Ambient Air Temperature For Storage:
- -25-70 °C EN/IEC 60947-4-2
- Power Dissipation In W:
- 4.5 W at full load and at end of starting || 324.5 W in transient state
- Rohs Exemption Information:
- Yes
- [Uc] Control Circuit Voltage:
- built into the starter
- Minimum Switching Current:
- 10 mA 6 V DC relay outputs
- Current Consumption:
- 160 A at nominal load
- Discrete Input Voltage:
- 24...40 V
- [Us] Rated Supply Voltage:
- 380...415 V - 10...10 %
- Supply Frequency:
- 50...60 Hz - 5...5 %
- Maximum Switching Current:
- relay outputs 2 A 250 V AC cos phi = 0.5 20 ms inductive || relay outputs 2 A 30 V DC cos phi = 0.5 20 ms inductive
- Product Specific Application:
- simple machine
- Type Of Start:
- start with voltage ramp
- Width:
- 45 mm
- Ip Degree Of Protection:
- IP20
- Function Available:
- integrated bypass
- Supply Voltage Limits:
- 342-456 V
- Reach Regulation:
- Free of Substances of Very High Concern above the threshold
- Marking:
- CE
- Motor Power Kw:
- 15 kW, 3 phase 380...415 V
- Power Range:
- 15-25 kW 380-440 V 3 phase
- Electrical Connection:
- 4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit || screw connector - rigid without cable end 1 0.5...2.5 mm² AWG 14 control circuit || 4 mm screw clamp terminal - rigid with cable end 2 1...6 mm² AWG 10 power circuit || screw co
- Electromagnetic Compatibility:
- conducted and radiated emissions level B CISPR 11 || conducted and radiated emissions level B IEC 60947-4-2 || damped oscillating waves level 3 IEC 61000-4-12 || electrostatic discharge level 3 IEC 61000-4-2 || EMC immunity level 3 EN 50082-1 || EMC
- Starting Torque:
- 30...80 % of starting torque of motor connected directly on the line supply
- Standards:
- EN/IEC 60947-4-2
- Output Voltage:
- <= power supply voltage
- China Rohs Regulation:
- X
- Product Certifications:
- C-tick || CSA || CCC || GOST || UL || B44.1-96/ASME A17.5 for starter wired to the motor delta terminal
- Warranty:
- 18 months
- Operating Altitude:
- <= 3280.84 ft (1000 m) without derating || > 3280.84 ft (1000 m) with current derating of 2.2 % per additional 100 m
- Phase:
- 3 phase
- Product Destination:
- asynchronous motors
- Display Type:
- 1 LED Green)starter powered up || 1 LED Yellow)nominal voltage reached
- Network Frequency:
- 47.5...63 Hz
- Net Weight:
- 0.56 kg
- Reach Free Of Svhc:
- Yes
- Product Or Component Type:
- soft starter
- Mercury Free:
- Yes
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Discrete Input Type:
- logic LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm
- Discrete Output Current:
- 2 A DC-13 || 3 A AC-15
- Deceleration Time Symb:
- adjustable from 1 to 10 s
- Pollution Degree:
- 2 EN/IEC 60947-4-2
- Height:
- 154 mm
- Discrete Input Logic:
- positive LI1, LI2, BOOST < 5 V <= 0.2 mA > 13 V, >= 0.5 mA
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Device Short Name:
- ATS01
- Toxic Heavy Metal Free:
- Yes
- Icl Starter Rating:
- 32 A
- Discrete Output Type:
- open collector logic LO1 end of starting signal || relay outputs R1A, R1C NO
- Assembly Style:
- with heat sink
- Starting Time:
- adjustable from 1 to 10 s || 1 s / 50 || 10 s / 5 || 5 s / 10
- Shock Resistance:
- 15 gn 11 ms EN/IEC 60068-2-27
- Operating Position:
- vertical +/- 10 degree
- Compatibility Code:
- ATS01N2
- Depth:
- 131 mm
- Relative Humidity:
- 5-95 % without condensation or dripping water EN/IEC 60068-2-3
- Catalog:
- View
- Datasheet:
- View
