
Schneider Electric ATS22C14S6 Electronic Soft Starter Control 220V Pow
Schneider Electric
$2,688.00
$1200 Minimum Order for Non-stock Items or $60 Addl Schneider Handling Fee Applies
This Altistart 22 soft starter can feed 3-phase asynchronous motors in supply line connection. It has a rating of 140A, a rated power from 37kW to 90kW and a rated voltage from 230V to 500V AC. It is designed for simple and complex machines such as centrifugal and piston pumps, fans, screw compressors and material handling equipment. Slim form factor improves versatility; allows mounting in frames of any kind of machines. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Compatibility with SoMove software allows configurations and settings to be easily transferred, meaning spares can be quickly installed. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.
- Product Certifications:
- GOST || CCC || CSA || UL || C-tick
- Rohs Exemption Information:
- Yes
- Phase:
- 3 phase
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Motor Starter Type:
- soft starter
- Protection Type:
- phase failure line || thermal protection motor || thermal protection starter
- Vibration Resistance:
- 1 gn 13-200 Hz)IEC 60068-2-6 || 1.5 mm 2-13 Hz)IEC 60068-2-6
- Minimum Switching Current:
- 100 mA 12 V DC relay outputs)
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Power Range:
- 30-50 kW 200-240 V 3 phase || 55-100 kW 380-440 V 3 phase || 55-100 kW 480-500 V 3 phase
- Discrete Input Type:
- LI1, LI2, LI3) logic, 5 mA 4.3 kOhm
- Utilisation Category:
- AC-53A
- Shock Resistance:
- 15 gn 11 ms IEC 60068-2-27
- Operating Altitude:
- <= 3280.84 ft (1000 m) without derating || > 3280.84...< 6561.68 ft (> 1000...< 2000 m) with current derating of 2.2 % per additional 100 m
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Noise Level:
- 56 dB
- Marking:
- CE
- Type Of Cooling:
- forced convection
- Warranty:
- 18 months
- Physical Interface:
- RS485 multidrop
- Control Circuit Consumption:
- 20 W
- Relative Humidity:
- 0-95 % without condensation or dripping water IEC 60068-2-3
- Ambient Air Temperature For Storage:
- -25-70 °C
- China Rohs Regulation:
- X
- Ambient Air Temperature For Operation:
- -10-40 °C without derating) || 40-60 °C with current derating 2.2 % per °C)
- Maximum Switching Current:
- 5 A 250 V AC resistive 1 relay outputs || 5 A 30 V DC resistive 1 relay outputs || 2 A 250 V AC inductive 0.4 20 ms relay outputs || 2 A 30 V DC inductive 7 ms relay outputs
- Width:
- 150 mm
- Depth:
- 229.5 mm
- Discrete Input Logic:
- positive logic LI1, LI2, LI3 < 5 V <= 2 mA > 11 V, >= 5 mA
- Discrete Output Type:
- relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O || relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
- Operating Position:
- vertical +/- 10 degree
- Assembly Style:
- with heat sink
- Product Or Component Type:
- soft starter
- Communication Port Protocol:
- Modbus
- Pollution Degree:
- level 2 IEC 60664-1
- Height:
- 356 mm
- [Uc] Control Circuit Voltage:
- 230 V - 15...10 % 50/60 Hz
- Type Of Start:
- start with torque control (current limited to 3.5 In)
- Ptc Probe Input:
- 750 Ohm
- Network Frequency:
- 45...66 Hz
- Product Destination:
- asynchronous motors
- Net Weight:
- 18 kg
- Motor Power Kw:
- 37 kW 230 V || 75 kW 400 V || 75 kW 440 V || 90 kW 500 V
- Power Dissipation In W:
- 82 W for standard applications
- Icl Starter Rating:
- 140 A connection in the motor supply line for standard applications
- Supply Voltage Limits:
- 195-660 V
- Discrete Output Number:
- 2
- Discrete Input Number:
- 3
- Discrete Input Voltage:
- 24 V <= 30 V
- Standards:
- IEC 60947-4-2
- Function Available:
- internal bypass
- Electromagnetic Compatibility:
- conducted and radiated emissions level A IEC 60947-4-2 || damped oscillating waves level 3 IEC 61000-4-12 || electrostatic discharge level 3 IEC 61000-4-2 || immunity to electrical transients level 4 IEC 61000-4-4 || immunity to radiated radio-electr
- Factory Setting Current:
- 124 A
- Communication Data Link:
- serial
- Connector Type:
- 1 RJ45
- Mercury Free:
- Yes
- Component Name:
- ATS22
- Product Specific Application:
- pumps and fans
- Transmission Rate:
- 4800, 9600 or 19200 bps
- Output Current:
- 0.4...1 Icl adjustable
- Device Connection:
- in the motor supply line
- Supply Frequency:
- 50...60 Hz - 10...10 %
- Range Of Product:
- Altistart 22
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- [Us] Rated Supply Voltage:
- 230...600 V - 15...10 %
- Ip Degree Of Protection:
- IP00
- Installed Device:
- 31
- Brochure:
- View
- Catalog:
- View
- Datasheet:
- View