Schneider Electric ATS22C17S6U Electronic Soft Starter Control 110V Pow

(No reviews yet) Write a Review
SKU:
ATS22C17S6U
UPC:
3606480167454
Condition:
New
Connector Type:
1 RJ45
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Component Name:
ATS22
Discrete Input Type:
LI1, LI2, LI3) logic, 5 mA 20 kOhm
Product Specific Application:
pumps and fans
Phase:
3 phase
Shock Resistance:
15 gn 11 ms IEC 60068-2-27
Device Connection:
in the motor supply line
Noise Level:
56 dB
Discrete Input Voltage:
110 V <= 121 V
Protection Type:
phase failure line || thermal protection motor || thermal protection starter
Product Certifications:
CSA || GOST || CCC || C-tick || UL
Function Available:
internal bypass
Electromagnetic Compatibility:
conducted and radiated emissions level A IEC 60947-4-2 || damped oscillating waves level 3 IEC 61000-4-12 || electrostatic discharge level 3 IEC 61000-4-2 || immunity to electrical transients level 4 IEC 61000-4-4 || immunity to radiated radio-electr
Communication Port Protocol:
Modbus
Supply Voltage Limits:
177-660 V
Range Of Product:
Altistart 22
Minimum Switching Current:
100 mA 12 V DC relay outputs)
Product Destination:
asynchronous motors
Type Of Start:
start with torque control (current limited to 3.5 In)
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Rohs Exemption Information:
Yes
Network Frequency:
45...66 Hz
Mercury Free:
Yes
Product Or Component Type:
soft starter
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Icl Starter Rating:
170 A connection in the motor supply line for standard applications
Factory Setting Current:
156 A
Power Dissipation In W:
91 W for standard applications
China Rohs Regulation:
X
[Uc] Control Circuit Voltage:
110 V - 15...10 % 50/60 Hz
Ptc Probe Input:
750 Ohm
Width:
150 mm
Standards:
IEC 60947-4-2
Marking:
CE
Pollution Degree:
level 2 IEC 60664-1
Ambient Air Temperature For Operation:
-10-40 °C without derating) || 40-60 °C with current derating 2.2 % per °C)
Control Circuit Consumption:
20 W
Transmission Rate:
4800, 9600 or 19200 bps
Operating Altitude:
<= 3280.84 ft (1000 m) without derating || > 3280.84...< 6561.68 ft (> 1000...< 2000 m) with current derating of 2.2 % per additional 100 m
Physical Interface:
RS485 multidrop
Relative Humidity:
0-95 % without condensation or dripping water IEC 60068-2-3
Height:
356 mm
Type Of Cooling:
forced convection
Warranty:
18 months
Discrete Output Type:
relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O || relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
Utilisation Category:
AC-53A
Net Weight:
18 kg
Output Current:
0.4...1 Icl adjustable
Assembly Style:
with heat sink
Discrete Input Logic:
positive logic LI1, LI2, LI3 < 20 V <= 15 mA > 79 V, <= 2 mA
Maximum Horse Power Rating:
125 hp 460 V || 150 hp 575 V || 50 hp 208 V || 60 hp 230 V
Maximum Switching Current:
5 A 250 V AC resistive 1 relay outputs || 5 A 30 V DC resistive 1 relay outputs || 2 A 250 V AC inductive 0.4 20 ms relay outputs || 2 A 30 V DC inductive 7 ms relay outputs
Vibration Resistance:
1 gn 13-200 Hz)IEC 60068-2-6 || 1.5 mm 2-13 Hz)IEC 60068-2-6
Ip Degree Of Protection:
IP00
[Us] Rated Supply Voltage:
208...600 V - 15...10 %
Operating Position:
vertical +/- 10 degree
Installed Device:
31
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Discrete Input Number:
3
Supply Frequency:
50...60 Hz - 10...10 %
Ambient Air Temperature For Storage:
-25-70 °C
Discrete Output Number:
2
Depth:
229.5 mm
Brochure:
View
Catalog:
View
Datasheet:
View
  • Schneider Electric ATS22C17S6U Electronic Soft Starter Control 110V Pow
  • Schneider Electric ATS22C17S6U Electronic Soft Starter Control 110V Pow
  • Schneider Electric ATS22C17S6U Electronic Soft Starter Control 110V Pow
$3,084.00

Description

This Altistart 22 soft starter can feed 3-phase asynchronous motors in supply line connection. It has a rating of 170A, a rated power from 50HP to 150HP and a rated voltage from 230V to 575V AC. It is designed for simple and complex machines such as centrifugal and piston pumps, fans, screw compressors and material handling equipment. Slim form factor improves versatility; allows mounting in frames of any kind of machines. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Compatibility with SoMove software allows configurations and settings to be easily transferred, meaning spares can be quickly installed. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.
View AllClose