
Schneider Electric ATS22C32S6 Electronic Soft Starter Control 220V Pow
Schneider Electric
$4,624.50
This Altistart 22 soft starter can feed 3-phase asynchronous motors in supply line connection. It has a rating of 320A, a rated power from 90kW to 220kW and a rated voltage from 230V to 500V AC. It is designed for simple and complex machines such as centrifugal and piston pumps, fans, screw compressors and material handling equipment. Slim form factor improves versatility; allows mounting in frames of any kind of machines. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Compatibility with SoMove software allows configurations and settings to be easily transferred, meaning spares can be quickly installed. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.
- Standards:
- EN/IEC 60947-4-2
- Supply Frequency:
- 50...60 Hz - 10...10 %
- Type Of Cooling:
- forced convection
- Product Or Component Type:
- soft starter
- Physical Interface:
- RS485 multidrop
- Ambient Air Temperature For Operation:
- -10-40 °C without derating) || 40-60 °C with current derating 2.2 % per °C)
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Phase:
- 3 phase
- Product Destination:
- asynchronous motors
- Depth:
- 299 mm
- Network Frequency:
- 45...66 Hz
- Supply Voltage Limits:
- 195-660 V
- Component Name:
- ATS22
- Mercury Free:
- Yes
- Control Circuit Consumption:
- 20 W
- China Rohs Regulation:
- X
- Output Current:
- 0.4...1 Icl adjustable
- Motor Starter Type:
- soft starter
- Maximum Switching Current:
- 5 A 250 V AC resistive 1 relay outputs || 5 A 30 V DC resistive 1 relay outputs || 2 A 250 V AC inductive 0.4 20 ms relay outputs || 2 A 30 V DC inductive 7 ms relay outputs
- Net Weight:
- 33 kg
- Pollution Degree:
- level 2 IEC 60664-1
- Rohs Exemption Information:
- Yes
- Assembly Style:
- with heat sink
- Range Of Product:
- Altistart 22
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Operating Altitude:
- <= 3280.84 ft (1000 m) without derating || > 3280.84...< 6561.68 ft (> 1000...< 2000 m) with current derating of 2.2 % per additional 100 m
- Ptc Probe Input:
- 750 Ohm
- Minimum Switching Current:
- 100 mA 12 V DC relay outputs)
- [Uc] Control Circuit Voltage:
- 230 V - 15...10 % 50/60 Hz
- Ambient Air Temperature For Storage:
- -25-70 °C
- Height:
- 425 mm
- Noise Level:
- 56 dB
- Relative Humidity:
- 0-95 % without condensation or dripping water EN/IEC 60068-2-3
- Transmission Rate:
- 4800, 9600 or 19200 bps
- Ip Degree Of Protection:
- IP00
- Width:
- 206 mm
- Discrete Input Logic:
- positive logic LI1, LI2, LI3 < 5 V <= 2 mA > 11 V, >= 5 mA
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Marking:
- CE
- Warranty:
- 18 months
- Discrete Input Number:
- 3
- Shock Resistance:
- 15 gn 11 ms EN/IEC 60068-2-27
- Communication Data Link:
- serial
- Installed Device:
- 31
- Device Connection:
- in the motor supply line
- Communication Port Protocol:
- Modbus
- Type Of Start:
- start with torque control (current limited to 3.5 In)
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Product Specific Application:
- pumps and fans
- Discrete Input Voltage:
- 24 V <= 30 V
- Icl Starter Rating:
- 320 A connection in the motor supply line for standard applications
- Motor Power Kw:
- 160 kW 400 V || 160 kW 440 V || 90 kW 230 V || 220 kW 500 V
- Connector Type:
- 1 RJ45
- Function Available:
- internal bypass
- Discrete Output Number:
- 2
- Operating Position:
- vertical +/- 10 degree
- Factory Setting Current:
- 302 A
- Electromagnetic Compatibility:
- conducted and radiated emissions level A IEC 60947-4-2 || damped oscillating waves level 3 IEC 61000-4-12 || electrostatic discharge level 3 IEC 61000-4-2 || immunity to electrical transients level 4 IEC 61000-4-4 || immunity to radiated radio-electr
- Product Certifications:
- UL || CSA || GOST || C-tick || CCC
- Utilisation Category:
- AC-53A
- Discrete Output Type:
- relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O || relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
- [Us] Rated Supply Voltage:
- 230...600 V - 15...10 %
- Power Dissipation In W:
- 150 W for standard applications
- Power Range:
- 55-100 kW 200-240 V 3 phase || 110-220 kW 380-440 V 3 phase || 110-220 kW 480-500 V 3 phase
- Discrete Input Type:
- LI1, LI2, LI3) logic, 5 mA 4.3 kOhm
- Vibration Resistance:
- 1 gn 13-200 Hz)EN/IEC 60068-2-6 || 1.5 mm 2-13 Hz)EN/IEC 60068-2-6
- Protection Type:
- phase failure line || thermal protection motor || thermal protection starter
- Brochure:
- View
- Catalog:
- View
- Datasheet:
- View