Schneider Electric ATS22D32S6 Electronic Soft Starter Control 220V Pow

(No reviews yet) Write a Review
SKU:
ATS22D32S6
UPC:
3.60648E+12
Condition:
New
Discrete Input Voltage:
24 V <= 30 V
Ip Degree Of Protection:
IP20
Supply Frequency:
50...60 Hz - 10...10 %
Network Frequency:
45...66 Hz
Communication Port Protocol:
Modbus
Type Of Start:
start with torque control (current limited to 3.5 In)
Discrete Input Logic:
positive logic LI1, LI2, LI3 < 5 V <= 2 mA > 11 V, >= 5 mA
Motor Power Kw:
15 kW 400 V || 15 kW 440 V || 7.5 kW 230 V || 18.5 kW 500 V
Product Destination:
asynchronous motors
Power Dissipation In W:
44 W for standard applications
Product Certifications:
CCC || UL || CSA || GOST || C-tick
Depth:
169 mm
Relative Humidity:
0-95 % without condensation or dripping water IEC 60068-2-3
Rohs Exemption Information:
Yes
Protection Type:
phase failure line || thermal protection motor || thermal protection starter
Installed Device:
31
Icl Starter Rating:
32 A connection in the motor supply line for standard applications
[Uc] Control Circuit Voltage:
230 V - 15...10 % 50/60 Hz
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Product Or Component Type:
soft starter
Assembly Style:
with heat sink
Output Current:
0.4...1 Icl adjustable
Product Specific Application:
pumps and fans
Device Connection:
in the motor supply line
Standards:
IEC 60947-4-2
Factory Setting Current:
27 A
Discrete Output Number:
2
China Rohs Regulation:
X
Pollution Degree:
level 2 IEC 60664-1
Supply Voltage Limits:
195-660 V
Electromagnetic Compatibility:
conducted and radiated emissions level A IEC 60947-4-2 || damped oscillating waves level 3 IEC 61000-4-12 || electrostatic discharge level 3 IEC 61000-4-2 || immunity to electrical transients level 4 IEC 61000-4-4 || immunity to radiated radio-electr
Noise Level:
45 dB
Shock Resistance:
15 gn 11 ms IEC 60068-2-27
Ambient Air Temperature For Storage:
-25-70 °C
Component Name:
ATS22
Marking:
CE
Maximum Switching Current:
5 A 250 V AC resistive 1 relay outputs || 5 A 30 V DC resistive 1 relay outputs || 2 A 250 V AC inductive 0.4 20 ms relay outputs || 2 A 30 V DC inductive 7 ms relay outputs
Control Circuit Consumption:
20 W
Function Available:
internal bypass
Ambient Air Temperature For Operation:
-10-40 °C without derating) || 40-60 °C with current derating 2.2 % per °C)
Operating Position:
vertical +/- 10 degree
Utilisation Category:
AC-53A
Discrete Input Type:
LI1, LI2, LI3) logic, 5 mA 4.3 kOhm
Transmission Rate:
4800, 9600 or 19200 bps
Width:
130 mm
Discrete Input Number:
3
Discrete Output Type:
relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O || relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
Warranty:
18 months
Vibration Resistance:
1 gn 13-200 Hz)IEC 60068-2-6 || 1.5 mm 2-13 Hz)IEC 60068-2-6
Mercury Free:
Yes
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Ptc Probe Input:
750 Ohm
Minimum Switching Current:
100 mA 12 V DC relay outputs)
Physical Interface:
RS485 multidrop
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Phase:
3 phase
Operating Altitude:
<= 3280.84 ft (1000 m) without derating || > 3280.84...< 6561.68 ft (> 1000...< 2000 m) with current derating of 2.2 % per additional 100 m
Connector Type:
1 RJ45
[Us] Rated Supply Voltage:
230...600 V - 15...10 %
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Net Weight:
7 kg
Type Of Cooling:
forced convection
Range Of Product:
Altistart 22
Height:
265 mm
  • Schneider Electric ATS22D32S6 Electronic Soft Starter Control 220V Pow
  • Schneider Electric ATS22D32S6 Electronic Soft Starter Control 220V Pow
$981.00

Description

This Altistart 22 soft starter can feed 3-phase asynchronous motors in supply line connection. It has a rating of 32A, a rated power from 7.5kW to 18.5kW and a rated voltage from 230V to 500V AC. It is designed for simple and complex machines such as centrifugal and piston pumps, fans, screw compressors and material handling equipment. Slim form factor improves versatility; allows mounting in frames of any kind of machines. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Compatibility with SoMove software allows configurations and settings to be easily transferred, meaning spares can be quickly installed. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.
View AllClose