Schneider Electric ATS22D47S6U Electronic Soft Starter Control 110V Pow

(No reviews yet) Write a Review
SKU:
ATS22D47S6U
UPC:
3606480167393
Condition:
New
Maximum Horse Power Rating:
15 hp 230 V || 30 hp 460 V || 40 hp 575 V
Device Connection:
in the motor supply line
Network Frequency:
45...66 Hz
Noise Level:
45 dB
Shock Resistance:
15 gn 11 ms IEC 60068-2-27
Type Of Cooling:
forced convection
Type Of Start:
start with torque control (current limited to 3.5 In)
[Uc] Control Circuit Voltage:
110 V - 15...10 % 50/60 Hz
China Rohs Regulation:
X
Product Certifications:
GOST || CSA || UL || C-tick || CCC
Icl Starter Rating:
47 A connection in the motor supply line for standard applications
Supply Frequency:
50...60 Hz - 10...10 %
Electromagnetic Compatibility:
conducted and radiated emissions level A IEC 60947-4-2 || damped oscillating waves level 3 IEC 61000-4-12 || electrostatic discharge level 3 IEC 61000-4-2 || immunity to electrical transients level 4 IEC 61000-4-4 || immunity to radiated radio-electr
Product Specific Application:
pumps and fans
Component Name:
ATS22
Height:
265 mm
Vibration Resistance:
1 gn 13-200 Hz)IEC 60068-2-6 || 1.5 mm 2-13 Hz)IEC 60068-2-6
Discrete Input Logic:
positive logic LI1, LI2, LI3 < 20 V <= 15 mA > 79 V, <= 2 mA
Function Available:
internal bypass
Ambient Air Temperature For Operation:
-10-40 °C without derating) || 40-60 °C with current derating 2.2 % per °C)
Discrete Input Number:
3
Range Of Product:
Altistart 22
Supply Voltage Limits:
177-660 V
Installed Device:
31
Pollution Degree:
level 2 IEC 60664-1
Transmission Rate:
4800, 9600 or 19200 bps
Connector Type:
1 RJ45
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Power Dissipation In W:
48 W for standard applications
Width:
130 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Product Or Component Type:
soft starter
Maximum Switching Current:
5 A 250 V AC resistive 1 relay outputs || 5 A 30 V DC resistive 1 relay outputs || 2 A 250 V AC inductive 0.4 20 ms relay outputs || 2 A 30 V DC inductive 7 ms relay outputs
Net Weight:
7 kg
Product Destination:
asynchronous motors
Relative Humidity:
0-95 % without condensation or dripping water IEC 60068-2-3
Warranty:
18 months
[Us] Rated Supply Voltage:
208...600 V - 15...10 %
Factory Setting Current:
40 A
Discrete Input Voltage:
110 V <= 121 V
Discrete Output Type:
relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O || relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
Mercury Free:
Yes
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Physical Interface:
RS485 multidrop
Output Current:
0.4...1 Icl adjustable
Ptc Probe Input:
750 Ohm
Marking:
CE
Rohs Exemption Information:
Yes
Phase:
3 phase
Control Circuit Consumption:
20 W
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Discrete Input Type:
LI1, LI2, LI3) logic, 5 mA 20 kOhm
Discrete Output Number:
2
Assembly Style:
with heat sink
Ambient Air Temperature For Storage:
-25-70 °C
Minimum Switching Current:
100 mA 12 V DC relay outputs)
Depth:
169 mm
Operating Altitude:
<= 3280.84 ft (1000 m) without derating || > 3280.84...< 6561.68 ft (> 1000...< 2000 m) with current derating of 2.2 % per additional 100 m
Protection Type:
phase failure line || thermal protection motor || thermal protection starter
Standards:
IEC 60947-4-2
Ip Degree Of Protection:
IP20
Communication Port Protocol:
Modbus
Operating Position:
vertical +/- 10 degree
Utilisation Category:
AC-53A
Brochure:
View
Catalog:
View
Datasheet:
View
  • Schneider Electric ATS22D47S6U Electronic Soft Starter Control 110V Pow
  • Schneider Electric ATS22D47S6U Electronic Soft Starter Control 110V Pow
  • Schneider Electric ATS22D47S6U Electronic Soft Starter Control 110V Pow
$1,179.00

Description

This Altistart 22 soft starter can feed 3-phase asynchronous motors in supply line connection. It has a rating of 47A, a rated power from 15HP to 40HP and a rated voltage from 230V to 575V AC. It is designed for simple and complex machines such as centrifugal and piston pumps, fans, screw compressors and material handling equipment. Slim form factor improves versatility; allows mounting in frames of any kind of machines. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Compatibility with SoMove software allows configurations and settings to be easily transferred, meaning spares can be quickly installed. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.
View AllClose