Schneider Electric ATS22D75S6 Electronic Soft Starter Control 220V Pow

(No reviews yet) Write a Review
SKU:
ATS22D75S6
UPC:
3606480167317
Condition:
New
Minimum Switching Current:
100 mA 12 V DC relay outputs)
Motor Starter Type:
soft starter
Type Of Start:
start with torque control (current limited to 3.5 In)
Depth:
207 mm
Installed Device:
31
Maximum Switching Current:
5 A 250 V AC resistive 1 relay outputs || 5 A 30 V DC resistive 1 relay outputs || 2 A 250 V AC inductive 0.4 20 ms relay outputs || 2 A 30 V DC inductive 7 ms relay outputs
Communication Port Protocol:
Modbus
Net Weight:
12 kg
Relative Humidity:
0-95 % without condensation or dripping water IEC 60068-2-3
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Product Or Component Type:
soft starter
Function Available:
internal bypass
Vibration Resistance:
1 gn 13-200 Hz)IEC 60068-2-6 || 1.5 mm 2-13 Hz)IEC 60068-2-6
Marking:
CE
Type Of Cooling:
forced convection
Standards:
IEC 60947-4-2
Product Destination:
asynchronous motors
Ambient Air Temperature For Operation:
-10-40 °C without derating) || 40-60 °C with current derating 2.2 % per °C)
Width:
145 mm
Range Of Product:
Altistart 22
Supply Frequency:
50...60 Hz - 10...10 %
Noise Level:
45 dB
Mercury Free:
Yes
Control Circuit Consumption:
20 W
Ptc Probe Input:
750 Ohm
Warranty:
18 months
Operating Altitude:
<= 3280.84 ft (1000 m) without derating || > 3280.84...< 6561.68 ft (> 1000...< 2000 m) with current derating of 2.2 % per additional 100 m
Assembly Style:
with heat sink
Ambient Air Temperature For Storage:
-25-70 °C
Icl Starter Rating:
75 A connection in the motor supply line for standard applications
Motor Power Kw:
37 kW 400 V || 37 kW 440 V || 18.5 kW 230 V || 45 kW 500 V
Protection Type:
phase failure line || thermal protection motor || thermal protection starter
Electromagnetic Compatibility:
conducted and radiated emissions level A IEC 60947-4-2 || damped oscillating waves level 3 IEC 61000-4-12 || electrostatic discharge level 3 IEC 61000-4-2 || immunity to electrical transients level 4 IEC 61000-4-4 || immunity to radiated radio-electr
Utilisation Category:
AC-53A
Network Frequency:
45...66 Hz
Discrete Input Number:
3
Discrete Input Type:
LI1, LI2, LI3) logic, 5 mA 4.3 kOhm
Product Specific Application:
pumps and fans
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
[Us] Rated Supply Voltage:
230...600 V - 15...10 %
Power Dissipation In W:
63 W for standard applications
Discrete Input Voltage:
24 V <= 30 V
Physical Interface:
RS485 multidrop
Supply Voltage Limits:
195-660 V
Discrete Output Type:
relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O || relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
Phase:
3 phase
Discrete Input Logic:
positive logic LI1, LI2, LI3 < 5 V <= 2 mA > 11 V, >= 5 mA
Device Connection:
in the motor supply line
Discrete Output Number:
2
Operating Position:
vertical +/- 10 degree
Transmission Rate:
4800, 9600 or 19200 bps
Ip Degree Of Protection:
IP20
Connector Type:
1 RJ45
Shock Resistance:
15 gn 11 ms IEC 60068-2-27
[Uc] Control Circuit Voltage:
230 V - 15...10 % 50/60 Hz
Product Certifications:
UL || CCC || C-tick || CSA || GOST
Factory Setting Current:
65 A
China Rohs Regulation:
X
Power Range:
30-50 kW 480-500 V 3 phase || 15-25 kW 200-240 V 3 phase || 30-50 kW 380-440 V 3 phase
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Output Current:
0.4...1 Icl adjustable
Height:
295 mm
Rohs Exemption Information:
Yes
Component Name:
ATS22
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Pollution Degree:
level 2 IEC 60664-1
Brochure:
View
Catalog:
View
Datasheet:
View
  • Schneider Electric ATS22D75S6 Electronic Soft Starter Control 220V Pow
  • Schneider Electric ATS22D75S6 Electronic Soft Starter Control 220V Pow
  • Schneider Electric ATS22D75S6 Electronic Soft Starter Control 220V Pow
$1,624.50

Description

This Altistart 22 soft starter can feed 3-phase asynchronous motors in supply line connection. It has a rating of 75A, a rated power from 18.5kW to 45kW and a rated voltage from 230V to 500V AC. It is designed for simple and complex machines such as centrifugal and piston pumps, fans, screw compressors and material handling equipment. Slim form factor improves versatility; allows mounting in frames of any kind of machines. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Compatibility with SoMove software allows configurations and settings to be easily transferred, meaning spares can be quickly installed. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.
View AllClose