Schneider Electric

Schneider Electric ATS22D88S6U Electronic Soft Starter Control 110V Pow

(No reviews yet) Write a Review
SKU:
ATS22D88S6U
UPC:
3606480167423
Condition:
New
Discrete Input Voltage:
110 V <= 121 V
Vibration Resistance:
1 gn 13-200 Hz)IEC 60068-2-6 || 1.5 mm 2-13 Hz)IEC 60068-2-6
Net Weight:
12 kg
Rohs Exemption Information:
Yes
Physical Interface:
RS485 multidrop
Utilisation Category:
AC-53A
Mercury Free:
Yes
Type Of Cooling:
forced convection
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Factory Setting Current:
77 A
Marking:
CE
Discrete Input Logic:
positive logic LI1, LI2, LI3 < 20 V <= 15 mA > 79 V, <= 2 mA
Warranty:
18 months
Device Connection:
in the motor supply line
[Us] Rated Supply Voltage:
208...600 V - 15...10 %
Relative Humidity:
0-95 % without condensation or dripping water IEC 60068-2-3
Discrete Output Type:
relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O || relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
Transmission Rate:
4800, 9600 or 19200 bps
Control Circuit Consumption:
20 W
Ambient Air Temperature For Storage:
-25-70 °C
Operating Altitude:
<= 3280.84 ft (1000 m) without derating || > 3280.84...< 6561.68 ft (> 1000...< 2000 m) with current derating of 2.2 % per additional 100 m
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Component Name:
ATS22
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Supply Voltage Limits:
177-660 V
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Discrete Input Number:
3
Maximum Horse Power Rating:
25 hp 208 V || 30 hp 230 V || 60 hp 460 V || 75 hp 575 V
Depth:
207 mm
China Rohs Regulation:
X
Discrete Output Number:
2
Product Or Component Type:
soft starter
Power Dissipation In W:
66 W for standard applications
Operating Position:
vertical +/- 10 degree
[Uc] Control Circuit Voltage:
110 V - 15...10 % 50/60 Hz
Output Current:
0.4...1 Icl adjustable
Discrete Input Type:
LI1, LI2, LI3) logic, 5 mA 20 kOhm
Communication Port Protocol:
Modbus
Assembly Style:
with heat sink
Function Available:
internal bypass
Ambient Air Temperature For Operation:
-10-40 °C without derating) || 40-60 °C with current derating 2.2 % per °C)
Electromagnetic Compatibility:
conducted and radiated emissions level A IEC 60947-4-2 || damped oscillating waves level 3 IEC 61000-4-12 || electrostatic discharge level 3 IEC 61000-4-2 || immunity to electrical transients level 4 IEC 61000-4-4 || immunity to radiated radio-electr
Protection Type:
phase failure line || thermal protection motor || thermal protection starter
Shock Resistance:
15 gn 11 ms IEC 60068-2-27
Noise Level:
45 dB
Minimum Switching Current:
100 mA 12 V DC relay outputs)
Standards:
IEC 60947-4-2
Ip Degree Of Protection:
IP20
Product Destination:
asynchronous motors
Supply Frequency:
50...60 Hz - 10...10 %
Width:
145 mm
Height:
295 mm
Installed Device:
31
Type Of Start:
start with torque control (current limited to 3.5 In)
Connector Type:
1 RJ45
Icl Starter Rating:
88 A connection in the motor supply line for standard applications
Product Specific Application:
pumps and fans
Phase:
3 phase
Pollution Degree:
level 2 IEC 60664-1
Network Frequency:
45...66 Hz
Range Of Product:
Altistart 22
Maximum Switching Current:
5 A 250 V AC resistive 1 relay outputs || 5 A 30 V DC resistive 1 relay outputs || 2 A 250 V AC inductive 0.4 20 ms relay outputs || 2 A 30 V DC inductive 7 ms relay outputs
Product Certifications:
UL || CSA || GOST || C-tick || CCC
Brochure:
View
Catalog:
View
Datasheet:
View
$1,900.50

Description

This Altistart 22 soft starter can feed 3-phase asynchronous motors in supply line connection. It has a rating of 88A, a rated power from 25HP to 75HP and a rated voltage from 230V to 575V AC. It is designed for simple and complex machines such as centrifugal and piston pumps, fans, screw compressors and material handling equipment. Slim form factor improves versatility; allows mounting in frames of any kind of machines. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Compatibility with SoMove software allows configurations and settings to be easily transferred, meaning spares can be quickly installed. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.
View AllClose