Schneider Electric

Schneider Electric ATS480C48Y Soft Starter Ats480 480A 208 To 690V

(No reviews yet) Write a Review
SKU:
ATS480C48Y
UPC:
3606481089144
Condition:
New
Marking:
CE || CCC || UKCA || EAC || RCM || cULus
Protection Type:
phase failure line || integrated thermal protection motor || thermal protection starter || current overload motor || underload motor || excessive starting time, locked rotor motor || motor phase loss motor || line supply phase loss line || line suppl
[In] Rated Current Pwr Loss Specifctn:
480.0 A
Width:
400.0 mm
Torque Control:
TRUE
Output Current Drift:
150-700 %
China Rohs Regulation:
X
Power Loss Static Current Independent:
25.0 W
Environmental Disclosure:
ENVPEP2102013EN
Maximum Acceleration Under Vibratory Load (During Storage):
15 m/s² at 200...500 Hz || 10 m/s² at 9...200 Hz
Maximum Permanent Current:
410.0 A at 40 °C heavy duty
Integrated Motor Overload Protection:
TRUE
Height:
670.0 mm
Environmental Class (During Operation):
class 3C3 according to IEC 60721-3-3 || class 3S2 according to IEC 60721-3-3
Discrete Input Type:
STOP) logic inputs, 3500 Ohm || RUN) logic inputs, 3500 Ohm || DI3) programmable as logic input, 3500 Ohm || DI4) programmable as logic input, 3500 Ohm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Discrete Output Number:
2
Ambient Air Temperature For Operation:
40-60 °C with current derating of 2 % per °C) || -15-40 °C without derating)
[Ie] Rated Operational Current:
normal duty 480.0 A 40 °C)
Discrete Input Number:
4
Method Of Access:
slave Modbus serial
Circularity Profile:
ENVEOLI2102013EN
Product Or Component Type:
soft starter
Upgradeability:
Upgraded components available
Analogue Input Number:
1
Maximum Acceleration Under Shock Load (During Storage):
100 m/s² at 11 ms
Sustainable Offer Status:
Green Premium product
Connector Type:
1 RJ45
Maximum Acceleration Under Vibrational Stress (During Operation):
10 m/s² at 13...200 Hz
Product Specific Application:
process and infrastructures
Analogue Output Number:
1
Option Card:
communication module Profibus DP V1 || communication module PROFINET || communication module Modbus TCP/EtherNet/IP || communication module CANopen daisy chain || communication module CANopen Sub-D || communication module CANopen open style
Accuracy Class:
class 10E
Device Connection:
in the motor supply line || to the motor delta terminals
Range Of Product:
Altivar Soft Starter ATS480
Apparent Power:
0.125 kVA
Depth:
314.0 mm
Supply Frequency:
50...60 Hz - 20...20 %
Maximum Acceleration Under Vibratory Load (During Transport):
15 m/s² at 200...500 Hz || 10 m/s² at 9...200 Hz
Physical Interface:
2-wire RS 485
Analogue Output Type:
current output AQ1 0...20 mA or 0...10 V 500 Ohm
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Data Format:
8 bits, configurable odd, even or no parity
Pollution Degree:
level 3
Display Screen Available:
TRUE
[Uc] Control Circuit Voltage:
110...250 V AC 50/60 Hz - 15...10 %
Relay Output Type:
relay outputs R1A 1 NO || relay outputs R1B 1 NO || relay outputs RIC NO/NC programmable
Standards:
IEC 60947-4-2 || UL 60947-4-2 || IEC 60664-1
Motor Power Kw:
132.0 kW 230 V in the motor supply line normal duty || 110.0 kW 230 V in the motor supply line heavy duty || 250.0 kW 400 V in the motor supply line normal duty || 220.0 kW 400 V in the motor supply line heavy duty || 250.0 kW 440 V in the motor supp
Utilisation Category:
AC-3A || AC-53A
Operating Altitude:
<= 3280.84 ft (1000 m) without derating || > 3280.84...13123.36 ft (> 1000...4000 m) with current derating 1 % per 100 m
Operating Position:
vertical +/- 10 degree
Maximum Deflection Under Vibratory Load (During Storage):
1.75 mm at 2...9 Hz
Maximum Acceleration Under Shock Impact (During Operation):
150 m/s² at 11 ms
Rohs Exemption Information:
Yes
Phase:
3 phase
Electromagnetic Compatibility:
conducted and radiated emissions level A IEC 60947-4-2 || conducted and radiated emissions with bypass level B IEC 60947-4-2 || damped oscillating waves level 3 IEC 61000-4-12 || electrostatic discharge level 3 IEC 61000-4-11 || immunity to electrica
Mercury Free:
Yes
Number Of Addresses:
0-227 Modbus serial
Transmission Rate:
1200...256000 bit/s
Maximum Deflection Under Vibratory Load (During Operation):
1.5 mm at 2...13 Hz
Minimum Switching Current:
100 mA 12 V DC relay outputs
Communication Port Protocol:
Modbus serial
[Ui] Rated Insulation Voltage:
690 V
Transmission Frame:
RTU
Maximum Switching Current:
relay outputs 2 A 250 V AC || relay outputs 2 A 30 V DC || relay outputs
[Uimp] Rated Impulse Withstand Voltage:
6 kV
Discrete Output Type:
DQ1) programmable digital output <= 30 V || DQ2) programmable digital output <= 30 V
Product Certifications:
CE || cULus || CCC || UKCA || RCM || EAC || DNV || ABS || BV || CCS
Maximum Deflection Under Vibratory Load (During Transport):
1.75 mm at 2...9 Hz
Product Destination:
asynchronous motors
Device Short Name:
ATS480
Relay Output Number:
3
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Power Loss Per Device Current Dependent:
1366.0 W
Discrete Input Logic:
programmable digital input < 5 V
Net Weight:
51.4 kg
Relative Humidity:
0-95 % without condensation or dripping water IEC 60068-2-3
Ip Degree Of Protection:
IP00
Maximum Horse Power Rating:
150.0 hp 208 V normal duty || 125.0 hp 208 V heavy duty || 150.0 hp 230 V heavy duty || 350.0 hp 460 V normal duty || 300.0 hp 460 V heavy duty || 400.0 hp 575 V normal duty || 350.0 hp 575 V heavy duty
[Us] Rated Supply Voltage:
208...690 V - 15...10 %
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Function Available:
external bypass control || pre-heating || smoke extraction || multi-motor cascade || second motor set || user management || ports and services hardening || security event logging || cybersecure firmware update || single direction
Maximum Acceleration Under Shock Load (During Transport):
100 m/s² at 11 ms
Type Of Polarization:
no impedance Modbus serial
Ambient Air Temperature For Storage:
-25-70 °C
Datasheet:
View
$7,201.24

Description

Altivar Soft Starter ATS480 is intended to start and stop asynchronous motors supplied from 208V to 690V. It meets the requirements of the most demanding applications in normal and heavy duty. With an operational rated current of 480A in normal duty, it supplies motor from 132kW to 500kW according to mains voltage. Designed for digitization, connected, optimized to meet cybersecurity standard, it simplifies project execution and maximizes the availability of applications. Its torque control (TCS) masters acceleration and deceleration. It efficiently stops high inertia application thanks to the dynamic braking and DC injection. It could be connected in-line or inside the delta to reduce its operational current. The embedded test routine simplifies the commissioning inside the delta. Its dimensions are 400mm (width) x 314mm (depth) x 670mm (height) and it weighs 51,4kg. Altivar Soft Starter ATS480 is designed to address process, infrastructures and industrial machines. It conforms to IEC/EN60947-4-1. It is certified CE, cULus, UKCA, CCC, RCM, EAC, and Marine certified DNV, ABS, BV and CCS. Display terminals, remote mounting kit, communication modules are common with Altivar Drives. Line chokes, DNV kits are common with ATS48. ATS480 is compatible with ATS48, it has same footprint, fixing, torque control algorithm, I/O, menus… The integration of Altivar Soft Starter ATS480 in EcoStruxure drastically simplifies architecture selection, detailed design and execution in automation and electrical systems. It is a Green Premium product designed to take the environmental considerations beyond current directives and regulations, compliant with RoHS and REACH.
View AllClose