Schneider Electric ATSU01N209LT Soft-Start Stop 9A 200 480V
Schneider Electric
$182.40
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric ATSU01N209LT Soft-Start Stop 9A 200 480V
The Altistart U01 soft start/soft stop unit can feed 3-phase asynchronous motors. It is designed primarily for combinations with TeSys U starter-controllers. It can be used for a motor rated power up to 4kW or 5hp for 3-phase (200V to 480V AC) and up to 9A rating. It is 45mm wide, this makes it one of the smallest soft starters on the market, it can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Its protection index is IP20. It weighs 0.34kg and its dimensions are, 45mm wide, 234mm high, 150mm deep. The Altistart U01 is designed for the following simple applications like conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It complies with standards IEC/EN 60947-4-2, and carries UL, CSA, C-Tick, and CCC certifications, and CE marking. It can be easily combined with a TeSys U controller by means of the power connector VW3G4104. It is easy to install on a DIN rail. Altistart 01 combines simplicity with easy cabling, fast configuration and efficiency. Reduced machine wear and minimized maintenance time will optimize operations. Together with TeSys Model U, it provides a unique motor starter solution.
- Relative Humidity:
- 5-95 % without condensation or dripping water EN/IEC 60068-2-3
- Icl Starter Rating:
- 0.375
- Function Available:
- integrated bypass
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Maximum Horse Power Rating:
- 2 hp, 3 phase 230 V || 5 hp, 3 phase 460 V
- Vibration Resistance:
- 1 gn 13-150 Hz)EN/IEC 60068-2-6 || 1.5 mm peak to peak 3-13 Hz)EN/IEC 60068-2-6
- Net Weight:
- 0.34 kg
- Width:
- 45 mm
- Maximum Switching Current:
- relay outputs 2 A 30 V DC cos phi = 0.5 20 ms inductive || relay outputs 2 A 250 V AC AC-15 cos phi = 0.5 20 ms inductive
- Product Specific Application:
- simple machine
- Pollution Degree:
- 2 EN/IEC 60947-4-2
- [Uc] Control Circuit Voltage:
- 24 V DC +/- 10 %
- Ambient Air Temperature For Operation:
- -10-40 °C without derating) || 40-50 °C with current derating of 2 % per °C)
- Discrete Input Logic:
- positive LI1, LI2, BOOST < 5 V <= 0.2 mA > 13 V, >= 0.5 mA
- Motor Starter Type:
- soft starter
- Reach Free Of Svhc:
- Yes
- Tightening Torque:
- 0.5-0.5 N.m || 1.9-2.5 N.m
- Input Output Isolation:
- galvanic between power and control
- Toxic Heavy Metal Free:
- Yes
- Output Voltage:
- <= power supply voltage
- Supply Voltage Limits:
- 180-528 V
- Mercury Free:
- Yes
- Rohs Exemption Information:
- Yes
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Discrete Output Voltage:
- 24 V 6...30 V) open collector logic
- Assembly Style:
- with heat sink
- Warranty:
- 18 months
- Marking:
- CE
- Ip Degree Of Protection:
- IP20
- Motor Power Kw:
- 4 kW, 3 phase 400 V || 1.5 kW, 3 phase 230 V
- Standards:
- EN/IEC 60947-4-2
- Power Dissipation In W:
- 1.5 W at full load and at end of starting || 91.5 W in transient state
- Operating Altitude:
- <= 3280.84 ft (1000 m) without derating || > 3280.84 ft (1000 m) with current derating of 2.2 % per additional 100 m
- Utilisation Category:
- AC-53B EN/IEC 60947-4-2
- Electrical Connection:
- 4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit || screw connector - rigid without cable end 1 0.5...2.5 mm² AWG 14 control circuit || 4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit || screw connector - rigid
- Reach Regulation:
- Free of Substances of Very High Concern above the threshold
- Minimum Switching Current:
- 10 mA 6 V DC relay outputs
- Electromagnetic Compatibility:
- conducted and radiated emissions level B CISPR 11 || conducted and radiated emissions level B IEC 60947-4-2 || damped oscillating waves level 3 IEC 61000-4-12 || electrostatic discharge level 3 IEC 61000-4-2 || EMC immunity EN 50082-1 || EMC immunity
- Device Short Name:
- ATSU01
- Supply Frequency:
- 50...60 Hz - 5...5 %
- Range Of Product:
- Altistart U01 and TeSys U
- Product Or Component Type:
- soft starter
- Height:
- 234 mm
- Maximum Switching Voltage:
- 440 V relay outputs
- Discrete Output Type:
- open collector logic LO1 end of starting signal || relay outputs R1A, R1C NO
- Product Certifications:
- UL || C-tick || CSA || CCC
- Discrete Input Voltage:
- 24...40 V
- Operating Position:
- vertical +/- 10 degree
- Current Consumption:
- 65 mA
- Discrete Input Type:
- logic LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm
- [Us] Rated Supply Voltage:
- 200...480 V - 10...10 %
- Network Frequency:
- 47.5...63 Hz
- Starting Time:
- 1 s / 100 || 5 s / 20 || 10 s / 10 || adjustable from 1 to 10 s
- Shock Resistance:
- 15 gn 11 ms EN/IEC 60068-2-27
- Ambient Air Temperature For Storage:
- -25-70 °C EN/IEC 60947-4-2
- Depth:
- 150 mm
- Phase:
- 3 phase
- Starting Torque:
- 30...80 % of starting torque of motor connected directly on the line supply
- Display Type:
- 1 LED Green)starter powered up || 1 LED Yellow)nominal voltage reached
- Type Of Start:
- start with voltage ramp
- Deceleration Time Symb:
- adjustable from 1 to 10 s
- Discrete Output Current:
- 2 A DC-13 || 3 A AC-15
- Product Destination:
- asynchronous motors
- Power Range:
- 1.1-2 kW 200-240 V 3 phase || 2.2-3 kW 380-440 V 3 phase || 4-6 kW
- China Rohs Regulation:
- X
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Catalog:
- View
- Datasheet:
- View
