Schneider Electric ATV212WU15N4 Atv212 1,5Kw 2Hp 480V Tri Cem Ip55

(No reviews yet) Write a Review
SKU:
ATV212WU15N4
UPC:
3.60648E+12
Condition:
New
Ambient Air Temperature For Storage:
-25-70 °C
Number Of Addresses:
1-247
Maximum Switching Current:
5 A 250 V AC resistive cos phi = 1 L/R = 0 ms FL, R) || 5 A 30 V DC resistive cos phi = 1 L/R = 0 ms FL, R) || 2 A 250 V AC inductive cos phi = 0.4 L/R = 7 ms FL, R) || 2 A 30 V DC inductive cos phi = 0.4 L/R = 7 ms FL, R)
Relative Humidity:
5-95 % without condensation IEC 60068-2-3 || 5-95 % without dripping water IEC 60068-2-3
Sampling Duration:
2 ms +/- 0.5 ms F discrete || 2 ms +/- 0.5 ms R discrete || 2 ms +/- 0.5 ms RES discrete || 3.5 ms +/- 0.5 ms VIA analog || 22 ms +/- 0.5 ms VIB analog
Speed Accuracy:
+/- 10 % of nominal slip 0.2 Tn to Tn
Analogue Input Type:
VIA switch-configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits || VIB configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits || VIB configurable PTC probe 0...6 probes 1500 Ohm || VIA switch-configurable current 0...20 mA 250 Ohm 10 bits
Product Or Component Type:
variable speed drive
Vibration Resistance:
1.5 mm 3-13 Hz)IEC 60068-2-6 || 1 gn 13-200 Hz)EN/IEC 60068-2-8
Apparent Power:
2.8 kVA 380 V
Depth:
192 mm
Continuous Output Current:
3.7 A 380 V || 3.7 A 460 V
Standards:
IEC 61800-3 environments 1 category C1 || IEC 61800-3 environments 2 category C1 || IEC 61800-3 environments 1 category C3 || IEC 61800-5-1 || IEC 61800-3 environments 2 category C3 || IEC 61800-3 || IEC 61800-3 category C2 || EN 61800-3 category C3
Operating Position:
vertical +/- 10 degree
Prospective Line Isc:
5 kA
Product Certifications:
UL || CSA || NOM 117 || C-tick
Line Current:
2.5 A 480 V || 3.2 A 380 V
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Phase:
3 phase
Asynchronous Motor Control Profile:
voltage/frequency ratio, 5 points || voltage/frequency ratio - Energy Saving, quadratic U/f || flux vector control without sensor, standard || voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo) || voltage/frequency ratio, 2 point
Linearity Error:
VIA +/- 0.15 % of maximum value input || VIB +/- 0.15 % of maximum value input || FM +/- 0.2 % output
Dielectric Strength:
3535 V DC between earth and power terminals || 5092 V DC between control and power terminals
Acceleration And Deceleration Ramps:
linear adjustable separately from 0.01 to 3200 s || automatic based on the load
Torque Accuracy:
+/- 15 %
Transmission Frame:
RTU
Speed Range:
45301
Braking To Standstill:
by DC injection
Specific Application:
HVAC
[Us] Rated Supply Voltage:
380...480 V - 15...10 %
Maximum Horse Power Rating:
2 hp
Analogue Output Number:
1
Data Format:
8 bits, 1 stop, odd even or no configurable parity
Isolation:
electrical between power and control
Tightening Torque:
1.3 N.m, 11.5 lb.in L1/R, L2/S, L3/T) || 0.6 N.m VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES)
Assembly Style:
with heat sink
Width:
215 mm
Network Frequency:
47.5...63 Hz
Analogue Output Type:
FM switch-configurable voltage 0...10 V DC 7620 Ohm 10 bits || FM switch-configurable current 0...20 mA 970 Ohm 10 bits
Nominal Switching Frequency:
12 kHz
Type Of Polarization:
no impedance
Speed Drive Output Frequency:
0.5-200 Hz
Motor Slip Compensation:
adjustable || not available in voltage/frequency ratio motor control || automatic whatever the load
Communication Service:
monitoring inhibitable || read holding registers (03) 2 words maximum || read device identification (43) || write multiple registers (16) 2 words maximum || time out setting from 0.1 to 100 s || write single register (06)
Local Signalling:
for DC bus energized 1 LED (red)
Device Short Name:
ATV212
Transmission Rate:
9600 bps or 19200 bps
Physical Interface:
2-wire RS 485
Supply Voltage Limits:
323-528 V
Switching Frequency:
6...16 kHz adjustable || 12...16 kHz with derating factor
Type Of Cable:
without mounting kit 1 IEC cable 45 °C, copper 90 °C / XLPE/EPR || without mounting kit 1 IEC cable 45 °C, copper 70 °C / PVC || with UL Type 1 kit 3 UL 508 cable 40 °C, copper 75 °C / PVC
Product Specific Application:
pumps and fans in HVAC
Accuracy:
+/- 0.6 % VIA) for a temperature variation 60 °C || +/- 0.6 % VIB) for a temperature variation 60 °C || +/- 1 % FM) for a temperature variation 60 °C
Response Time:
FM 2 ms +/- 0.5 ms analog || FLA, FLC 7 ms +/- 0.5 ms discrete || FLB, FLC 7 ms +/- 0.5 ms discrete || RY, RC 7 ms +/- 0.5 ms discrete
Electromagnetic Compatibility:
electrostatic discharge immunity test level 3 IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge immu
Rohs Exemption Information:
Yes
Environmental Characteristic:
classes 3C1 IEC 60721-3-3 || classes 3S2 IEC 60721-3-3
Frequency Resolution:
display unit 0.1 Hz || analog input 0.024/50 Hz
Electrical Connection:
VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES terminal 2.5-2.5 mm² / AWG 14 || L1/R, L2/S, L3/T terminal 6-6 mm² / AWG 10
Pollution Degree:
2 IEC 61800-5-1
Option Card:
communication card LonWorks
Warranty:
18 months
Emc Filter:
Class C2 EMC filter integrated
Insulation Resistance:
>= 1 mOhm 500 V DC for 1 minute
Net Weight:
7 kg
Noise Level:
48 dB 86/188/EEC
Maximum Transient Current:
4 A 60 s
Functionality:
mid
Transient Overtorque:
120-120 % of nominal motor torque +/- 10 % 60 s
Ambient Air Temperature For Operation:
-10-40 °C without derating) || 40-50 °C with derating factor)
Protection Type:
overheating protection drive || thermal power stage drive || short-circuit between motor phases drive || input phase breaks drive || overcurrent between output phases and earth drive || overvoltages on the DC bus drive || break on the control circuit
Connector Type:
1 open style || 1 RJ45
Motor Power Kw:
1.5 kW
Mercury Free:
Yes
Supply Frequency:
50...60 Hz - 5...5 %
Height:
297 mm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Output Voltage:
<= power supply voltage
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Marking:
CE
Discrete Output Type:
configurable relay logic FLA, FLC) NO - 100000 cycles || configurable relay logic FLB, FLC) NC - 100000 cycles || configurable relay logic RY, RC) NO - 100000 cycles
Shock Resistance:
15 gn 11 ms IEC 60068-2-27
Environmental Disclosure:
ENVPEP111228EN
Regulation Loop:
adjustable PI regulator
Communication Port Protocol:
METASYS N2 || APOGEE FLN || Modbus || BACnet || LonWorks
Ip Degree Of Protection:
IP55
Analogue Input Number:
2
Discrete Input Logic:
positive logic (source) F, R, RES), <= 5 V, >= 11 V || negative logic (sink) F, R, RES), >= 16 V, <= 10 V
Supply:
internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 A overload and short-circuit protection || internal supply 24 V DC 21-27 V), <200 A overload and short-circuit protection
Operating Altitude:
3280.84...9842.52 ft (1000...3000 m) limited to 2000 m for the Corner Grounded distribution network with current derating 1 % per 100 m || <= 3280.84 ft (1000 m) without derating
Ip Degree Of Protection:
IP55 IEC 61800-5-1 || IP55 IEC 60529
Range Of Product:
Altivar 212
Circularity Profile:
ENVEOLI111234EN
Product Destination:
asynchronous motors
Minimum Switching Current:
3 mA 24 V DC configurable relay logic
Discrete Input Type:
F programmable 24 V DC level 1 PLC 4700 Ohm || R programmable 24 V DC level 1 PLC 4700 Ohm || RES programmable 24 V DC level 1 PLC 4700 Ohm
Sustainable Offer Status:
Green Premium product
Discrete Output Number:
2
China Rohs Regulation:
X
  • Schneider Electric ATV212WU15N4 Atv212 1,5Kw 2Hp 480V Tri Cem Ip55
  • Schneider Electric ATV212WU15N4 Atv212 1,5Kw 2Hp 480V Tri Cem Ip55
$963.96

Description

This Altivar 212 variable speed drive can feed 3-phase asynchronous motors. Its protection index is IP55 and it has a built-in EMC filter. It works at a rated power up to 1.5kW / 2hp and a rated voltage from 380V to 480V AC. Its design is based on eco-energy with a reduction in energy consumption of up to 70% compared to a conventional control system. Thanks to its cable temperature rise reduction technology, the Altivar 212 drive offers immediate, disturbance-free operation avoiding additional options such as a line choke or DC choke to deal with current harmonics. It weighs 7kg and its dimensions are, 215mm wide, 297mm high, 192mm deep. It is specifically designed for the most common fluid management applications in tertiary sector buildings (HVAC) like heating, ventilation, air conditioning and pumping. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions). It is also CE, UL, CSA, C-Tick and NOM certified. The Altivar 212 offers optional motor chokes which can increase the maximum cable lengths between the drive and the motor and limit disturbance at the motor terminals. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. The Altivar 212 drive can easily be adapted to all building management systems thanks to its numerous functions and communication protocols integrated as standard, Modbus, METASYS N2, APOGEE FLN P1 and BACnet.
View AllClose