Schneider Electric ATV650D11N4U Atv650 Ip55 Ul Type12 11Kw 15Hp 400V/480
SKU:
ATV650D11N4U
UPC:
3606480906787
MPN:
Condition:
New
Switching Frequency:
4...12 kHz with derating factor || 2...12 kHz adjustable
Pollution Degree:
2 IEC 61800-5-1
Emc Filter:
integrated 50 m IEC 61800-3 category C2 || integrated 150 m IEC 61800-3 category C3
Synchronous Motor Control Profile:
synchronous reluctance motor || permanent magnet motor
Local Signalling:
for embedded communication status 3 LEDs (dual colour) || for communication module status 4 LEDs (dual colour) || for presence of voltage 1 LED (red) || for local diagnostic 3 LEDs
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Environmental Disclosure:
ENVPEP1508009EN
Relative Humidity:
5-95 % without condensation IEC 60068-2-3
Number Of Addresses:
1-247 Modbus serial
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Continuous Output Current:
16.5 A 4 kHz heavy duty || 23.5 A 4 kHz normal duty
Frequency Resolution:
analog input 0.012/50 Hz || display unit 0.1 Hz
Accuracy:
+/- 1 % AO1, AO2 for a temperature variation 60 °C analog output || +/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input
AO1, AO2 +/- 0.2 % analog output || AI1, AI2, AI3 +/- 0.15 % of maximum value analog input
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Upgradeability:
Upgraded components available
Degree Of Protection:
UL type 12 UL 508C
Maximum Transient Current:
24.8 A 60 s heavy duty) || 25.9 A 60 s normal duty)
Device Short Name:
ATV650
Nominal Switching Frequency:
4 kHz
Noise Level:
52 dB
Asynchronous Motor Control Profile:
variable torque standard || optimized torque mode
Product Specific Application:
process and utilities
Maximum Switching Current:
relay output R1, R2, R3 resistive, cos phi = 1 3 A 30 V DC || relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 30 V DC || relay output R1, R2, R3 resistive, cos phi = 1 3
10.4 kVA 480 V heavy duty) || 14.1 kVA 480 V normal duty)
Sustainable Offer Status:
Green Premium product
Vibration Resistance:
1 gn 13-200 Hz)IEC 60068-2-6 || 1.5 mm peak to peak 2-13 Hz)IEC 60068-2-6
Discrete Input Type:
DI7, DI8 programmable as pulse input 0-30 kHz, 24 V DC <= 30 V)
Prospective Line Isc:
50 kA
Protection Type:
safe torque off motor || motor phase break motor || thermal protection drive || safe torque off drive || overheating drive || overcurrent between output phases and earth drive || overload of output voltage drive || short-circuit protection drive || m
Net Weight:
13.7 kg
Analogue Input Type:
AI1, AI2, AI3 software-configurable voltage 0...10 V DC 31.5 kOhm 12 bits || AI1, AI2, AI3 software-configurable current 0...20 mA 250 Ohm 12 bits || AI2 voltage analog input - 10...10 V DC 31.5 kOhm 12 bits
Operating Position:
vertical +/- 10 degree
Option Card:
slot A communication module, PROFINET || slot A communication module, DeviceNet || slot A communication module, Modbus TCP/EtherNet/IP || slot A communication module, CANopen daisy chain RJ45 || slot A communication module, CANopen SUB-D 9 || slot A
Discrete Output Type:
relay outputs R1A, R1B, R1C 250 V AC 3000 mA || relay outputs R1A, R1B, R1C 30 V DC 3000 mA || relay outputs R2A, R2C 250 V AC 5000 mA || relay outputs R2A, R2C 30 V DC 5000 mA || relay outputs R3A, R3C 250 V AC 5000 mA || relay outputs R3A, R3C 30 V
Type Of Polarization:
no impedance
Noise Level:
52 dB 86/188/EEC
Relay Output Number:
3
Operating Altitude:
1000...4800 m with current derating 1 % per 100 m || <= 3280.84 ft (1000 m) without derating
Width:
264 mm
Product Destination:
asynchronous motors || synchronous motors
Rohs Exemption Information:
Yes
Acceleration And Deceleration Ramps:
linear adjustable separately from 0.01...9999 s
Method Of Access:
slave Modbus TCP
Pollution Degree:
3
Type Of Cooling:
forced convection
Physical Interface:
Ethernet || 2-wire RS 485
Marking:
CE
Ambient Air Temperature For Storage:
-40-70 °C
Electromagnetic Compatibility:
radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge immunity test level 3 IEC 61000-4-5 || conducted radio-frequency im
Variant:
standard version
[Us] Rated Supply Voltage:
380...480 V - 15...10 %
Analogue Output Number:
2
Regulation Loop:
adjustable PID regulator
Product Certifications:
UL || TÜV || CSA
Quantity Per Set:
1
Supply Frequency:
50...60 Hz - 5...5 %
Overvoltage Category:
III
Permissible Temporary Current Boost:
1.5 x In 60 s heavy duty) || 1.1 x In 60 s normal duty)
Discrete Input Logic:
16 preset speeds
Isolation:
between power and control terminals
Connector Type:
RJ45 on the remote graphic terminal)Modbus serial || RJ45 on the remote graphic terminal)Ethernet/Modbus TCP
Braking To Standstill:
by DC injection
Line Current:
17 A 480 V normal duty) || 14.1 A 380 V heavy duty) || 12.5 A 480 V heavy duty) || 19.8 A 380 V normal duty)
Maximum Thdi:
<48 % from 80...100 % of load IEC 61000-3-12
Mercury Free:
Yes
Ip Degree Of Protection:
IP55IEC 60529 || IP55IEC 61800-5-1
Transmission Frame:
RTU
Sampling Duration:
5 ms +/- 1 ms DI5, DI6) - discrete input || 5 ms +/- 0.1 ms AI1, AI2, AI3) - analog input || 10 ms +/- 1 ms AO1) - analog output || 2 ms +/- 0.5 ms DI1...DI4) - discrete input
Ambient Air Temperature For Operation:
40-50 °C with derating factor) || -15-40 °C without derating)
software-configurable voltage AQ1, AQ2 0...10 V DC 470 Ohm 10 bits || software-configurable current AQ1, AQ2 0...20 mA 10 bits || software-configurable current DQ-, DQ+ 30 V DC || software-configurable current DQ-, DQ+ 100 mA
Maximum Output Frequency:
500 kHz
Discrete Output Number:
0
Exchange Mode:
half duplex, full duplex, autonegotiation Ethernet/Modbus TCP
Analogue Input Number:
3
Supply:
internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection || internal supply for digital inputs and STO 24 V DC 21-27 V), <200 mA overload and short-circuit protection || external suppl
This Altivar Process ATV600 variable speed drive can feed 3-phase synchronous and asynchronous power motors. This variable speed drive features an integrated EMC filter with 50m and 150m cable...
