line side screw terminal 4...6 mm² || motor screw terminal 4...6 mm² || control removable screw terminals 0.5...1.5 mm²
Discrete Output Number:
0
Motor Power Kw:
0.75 kW heavy duty) || 1.5 kW normal duty)
Maximum Thdi:
<48 % full load IEC 61000-3-12
Refresh Time:
relay output R1, R2, R3)5 ms +/- 0.5 ms)
Noise Level:
52 dB 86/188/EEC
Mercury Free:
Yes
Mounting Mode:
wall mount
Option Card:
slot A communication module, PROFINET || slot A communication module, DeviceNet || slot A communication module, Modbus TCP/EtherNet/IP || slot A communication module, CANopen daisy chain RJ45 || slot A communication module, CANopen SUB-D 9 || slot A
Analogue Input Type:
AI1, AI2, AI3 software-configurable voltage 0...10 V DC 31.5 kOhm 12 bits || AI1, AI2, AI3 software-configurable current 0...20 mA 250 Ohm 12 bits || AI2 voltage analog input - 10...10 V DC 31.5 kOhm 12 bits
relay output R1, R2, R3 resistive, cos phi = 1 3 A 30 V DC || relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 30 V DC || relay output R1, R2, R3 resistive, cos phi = 1 3
Isolation:
between power and control terminals
Product Or Component Type:
variable speed drive
Environmental Disclosure:
ENVPEP1508009EN
Product Certifications:
TÃV || DNV-GL || ATEX INERIS || CSA || UL
Linearity Error:
AO1, AO2 +/- 0.2 % analog output || AI1, AI2, AI3 +/- 0.15 % of maximum value analog input
Product Destination:
asynchronous motors || synchronous motors
Number Of Addresses:
1-247 Modbus serial
Marking:
CE
Device Short Name:
ATV650
Discrete Output Type:
relay outputs R1A, R1B, R1C 250 V AC 3000 mA || relay outputs R1A, R1B, R1C 30 V DC 3000 mA || relay outputs R2A, R2C 250 V AC 5000 mA || relay outputs R2A, R2C 30 V DC 5000 mA || relay outputs R3A, R3C 250 V AC 5000 mA || relay outputs R3A, R3C 30 V
Synchronous Motor Control Profile:
synchronous reluctance motor || permanent magnet motor
Maximum Horse Power Rating:
1 hp heavy duty || 2 hp normal duty
Variant:
with disconnect switch
Maximum Output Frequency:
500 kHz
Pollution Degree:
2 IEC 61800-5-1
Relative Humidity:
5-95 % without condensation IEC 60068-2-3
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Continuous Output Current:
2.2 A 4 kHz heavy duty || 4 A 4 kHz normal duty
Method Of Access:
slave Modbus TCP
Communication Port Protocol:
Modbus serial || Modbus TCP
Maximum Transient Current:
3.3 A 60 s heavy duty) || 4.4 A 60 s normal duty)
Circularity Profile:
ENVEOLI1508009EN
Supply:
internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection || internal supply for digital inputs and STO 24 V DC 21-27 V), <200 mA overload and short-circuit protection || external suppl
Discrete Input Number:
8
Apparent Power:
1.2 kVA 480 V heavy duty) || 2.2 kVA 480 V normal duty)
Local Signalling:
for embedded communication status 3 LEDs (dual colour) || for communication module status 4 LEDs (dual colour) || for presence of voltage 1 LED (red) || for local diagnostic 3 LEDs
Pollution Degree:
3
Operating Altitude:
1000...4800 m with current derating 1 % per 100 m || <= 3280.84 ft (1000 m) without derating
safe torque off motor || motor phase break motor || thermal protection drive || safe torque off drive || overheating drive || overcurrent between output phases and earth drive || overload of output voltage drive || short-circuit protection drive || m
Depth:
300 mm
Emc Filter:
integrated 50 m IEC 61800-3 category C2 || integrated 150 m IEC 61800-3 category C3
Relay Output Number:
3
Rohs Exemption Information:
Yes
[Us] Rated Supply Voltage:
380...480 V
Accuracy:
+/- 1 % AO1, AO2 for a temperature variation 60 °C analog output || +/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input
Electromagnetic Compatibility:
radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge immunity test level 3 IEC 61000-4-5 || conducted radio-frequency
Insulation Resistance:
> 1 MOhm 500 V DC for 1 minute to earth
Data Format:
8 bits, configurable odd, even or no parity
Type Of Polarization:
no impedance
Connector Type:
RJ45 on the remote graphic terminal)Modbus serial || RJ45 on the remote graphic terminal)Ethernet/Modbus TCP
Analogue Output Type:
software-configurable voltage AQ1, AQ2 0...10 V DC 470 Ohm 10 bits || software-configurable current AQ1, AQ2 0...20 mA 10 bits || software-configurable current DQ-, DQ+ 30 V DC || software-configurable current DQ-, DQ+ 100 mA
Operating Position:
vertical +/- 10 degree
Upgradeability:
Upgraded components available
Discrete Input Type:
DI7, DI8 programmable as pulse input 0-30 kHz, 24 V DC <= 30 V)
Vibration Resistance:
1 gn 13-200 Hz)IEC 60068-2-6 || 1.5 mm peak to peak 2-13 Hz)IEC 60068-2-6
Braking To Standstill:
by DC injection
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Asynchronous Motor Control Profile:
constant torque standard || optimized torque mode
Exchange Mode:
half duplex, full duplex, autonegotiation Ethernet/Modbus TCP
Ip Degree Of Protection:
IP55IEC 60529 || IP55IEC 61800-5-1
Product Specific Application:
process and utilities
Prospective Line Isc:
50 kA
Output Voltage:
<= power supply voltage
Enclosure Mounting:
wall mounted
Switching Frequency:
4...12 kHz with derating factor || 2...12 kHz adjustable
Ambient Air Temperature For Storage:
-40-70 °C
[Us] Rated Supply Voltage:
380...480 V - 15...10 %
Quantity Per Set:
1
Motor Slip Compensation:
automatic whatever the load || adjustable || can be suppressed
Width:
264 mm
Phase:
3 phase
Line Current:
2.6 A 480 V normal duty) || 1.7 A 380 V heavy duty) || 1.5 A 480 V heavy duty) || 3 A 380 V normal duty)
5 ms +/- 1 ms DI5, DI6) - discrete input || 5 ms +/- 0.1 ms AI1, AI2, AI3) - analog input || 10 ms +/- 1 ms AO1) - analog output || 2 ms +/- 0.5 ms DI1...DI4) - discrete input
Speed Drive Output Frequency:
0.1-500 Hz
Permissible Temporary Current Boost:
1.5 x In 60 s heavy duty) || 1.1 x In 60 s normal duty)
Ambient Air Temperature For Operation:
40-50 °C with derating factor) || -15-40 °C without derating)
This Altivar Process ATV600 variable speed drive can feed 3-phase synchronous and asynchronous power motors. This variable speed drive features an integrated EMC filter with 50m and 150m cable...
This Altivar Process ATV600 variable speed drive can feed 3-phase synchronous and asynchronous power motors. This variable speed drive features an integrated EMC filter with 50m and 150m cable...
This Altivar Process ATV600 variable speed drive can feed 3-phase synchronous and asynchronous power motors. This variable speed drive features an integrated EMC filter with 50m and 150m cable...
