Schneider Electric

Schneider Electric ATV650U40N4EU Atv650 Ip55 Ultype12 4Kw 5Hp 400V/480V W

(No reviews yet) Write a Review

Write a Review

Schneider Electric

Schneider Electric ATV650U40N4EU Atv650 Ip55 Ultype12 4Kw 5Hp 400V/480V W

Rating Required Select Rating 1 star (worst) 2 stars 3 stars (average) 4 stars 5 stars (best)

Name

Email Required

Review Subject Required

Comments Required

SKU:

ATV650U40N4EU

UPC:

3606480907043

MPN:

Condition:

New

Discrete Input Number:

8

Net Weight:

10.6 kg

Analogue Output Type:

software-configurable voltage AQ1, AQ2 0...10 V DC 470 Ohm 10 bits || software-configurable current AQ1, AQ2 0...20 mA 10 bits || software-configurable current DQ-, DQ+ 30 V DC || software-configurable current DQ-, DQ+ 100 mA

Quantity Per Set:

1

Refresh Time:

relay output R1, R2, R3)5 ms +/- 0.5 ms)

Maximum Output Frequency:

500 kHz

Mounting Mode:

wall mount

Type Of Polarization:

no impedance

Shock Resistance:

15 gn 11 ms IEC 60068-2-27

Motor Power Kw:

3 kW heavy duty) || 4 kW normal duty)

Marking:

CE

Supply Frequency:

50...60 Hz - 5...5 %

Frequency Resolution:

analog input 0.012/50 Hz || display unit 0.1 Hz

Linearity Error:

AO1, AO2 +/- 0.2 % analog output || AI1, AI2, AI3 +/- 0.15 % of maximum value analog input

Variant:

with disconnect switch

Product Destination:

asynchronous motors || synchronous motors

Noise Level:

52 dB 86/188/EEC

Maximum Switching Current:

relay output R1, R2, R3 resistive, cos phi = 1 3 A 30 V DC || relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 30 V DC || relay output R1, R2, R3 resistive, cos phi = 1 3

Communication Port Protocol:

Modbus TCP || Ethernet || Modbus serial

Upgradeability:

Upgraded components available

Weee:

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

Device Short Name:

ATV650

Mercury Free:

Yes

Ambient Air Temperature For Storage:

-40-70 °C

Option Card:

slot A communication module, PROFINET || slot A communication module, DeviceNet || slot A communication module, Modbus TCP/EtherNet/IP || slot A communication module, CANopen daisy chain RJ45 || slot A communication module, CANopen SUB-D 9 || slot A

Braking To Standstill:

by DC injection

Discrete Input Type:

DI7, DI8 programmable as pulse input 0-30 kHz, 24 V DC <= 30 V)

Analogue Input Type:

AI1, AI2, AI3 software-configurable voltage 0...10 V DC 31.5 kOhm 12 bits || AI1, AI2, AI3 software-configurable current 0...20 mA 250 Ohm 12 bits || AI2 voltage analog input - 10...10 V DC 31.5 kOhm 12 bits

Maximum Thdi:

<48 % full load IEC 61000-3-12

Product Specific Application:

process and utilities

Operating Position:

vertical +/- 10 degree

Environmental Disclosure:

ENVPEP1508009EN

Data Format:

8 bits, configurable odd, even or no parity

Exchange Mode:

half duplex, full duplex, autonegotiation Ethernet/Modbus TCP

Electrical Connection:

line side screw terminal 4...6 mm² || motor screw terminal 4...6 mm² || control removable screw terminals 0.5...1.5 mm²

Number Of Addresses:

1-247 Modbus serial

Sustainable Offer Status:

Green Premium product

Local Signalling:

for embedded communication status 3 LEDs (dual colour) || for communication module status 4 LEDs (dual colour) || for presence of voltage 1 LED (red) || for local diagnostic 3 LEDs

Motor Slip Compensation:

not available in permanent magnet motor law || adjustable || automatic whatever the load || can be suppressed

Accuracy:

+/- 1 % AO1, AO2 for a temperature variation 60 °C analog output || +/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input

Reach Regulation:

Reference contains Substances of Very High Concern above the threshold

Isolation:

between power and control terminals

China Rohs Regulation:

X

Discrete Input Logic:

16 preset speeds

Noise Level:

52 dB

Transmission Frame:

RTU

Input Compatibility:

DI5, DI6 discrete input level 1 PLC IEC 65A-68 || STOA, STOB discrete input level 1 PLC IEC 61131-2 || DI1...DI6 discrete input level 1 PLC IEC 61131-2

Maximum Horse Power Rating:

4 hp heavy duty || 5 hp normal duty

Relay Output Number:

3

Ambient Air Temperature For Operation:

40-50 °C with derating factor) || -15-40 °C without derating)

Relay Output Type:

configurable relay logic R2 sequence relay NO 100000 cycles || configurable relay logic R3 sequence relay NO 100000 cycles || configurable relay logic R1 fault relay NO/NC 100000 cycles

Degree Of Protection:

UL type 12 UL 508C

Enclosure Mounting:

wall mounted

Nominal Switching Frequency:

4 kHz

Height:

678 mm

California Proposition 65:

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Prospective Line Isc:

50 kA

Sampling Duration:

5 ms +/- 1 ms DI5, DI6) - discrete input || 5 ms +/- 0.1 ms AI1, AI2, AI3) - analog input || 10 ms +/- 1 ms AO1) - analog output || 2 ms +/- 0.5 ms DI1...DI4) - discrete input

Product Certifications:

UL || TÜV || ATEX zone 2/22 || DNV-GL || CSA

Type Of Cooling:

forced convection

Connector Type:

RJ45 on the remote graphic terminal)Modbus serial || RJ45 on the remote graphic terminal)Ethernet/Modbus TCP

Discrete Output Type:

relay outputs R1A, R1B, R1C 250 V AC 3000 mA || relay outputs R1A, R1B, R1C 30 V DC 3000 mA || relay outputs R2A, R2C 250 V AC 5000 mA || relay outputs R2A, R2C 30 V DC 5000 mA || relay outputs R3A, R3C 250 V AC 5000 mA || relay outputs R3A, R3C 30 V

Circularity Profile:

ENVEOLI1508009EN

Synchronous Motor Control Profile:

synchronous reluctance motor || permanent magnet motor

Physical Interface:

Ethernet || 2-wire RS 485

Width:

264 mm

Electromagnetic Compatibility:

radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge immunity test level 3 IEC 61000-4-5 || conducted radio-frequency

Speed Drive Output Frequency:

0.1-500 Hz

Range Of Product:

Altivar Process ATV600

[Us] Rated Supply Voltage:

380...480 V - 15...10 %

Transmission Rate:

10, 100 Mbits || 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps

Analogue Output Number:

2

Phase:

3 phase

Standards:

IEC 61800-3 environment 1 category C2 || EN/IEC 61800-3 environment 2 category C3 || IEC 61800-5-1 || IEC 61000-3-12 || IEC 60721-3 || IEC 61508 || IEC 13849-1 || IEC 61800-3

Product Or Component Type:

variable speed drive

Line Current:

6.7 A 480 V normal duty) || 6 A 380 V heavy duty) || 5.4 A 480 V heavy duty) || 7.6 A 380 V normal duty)

Protection Type:

safe torque off motor || motor phase break motor || thermal protection drive || safe torque off drive || overheating drive || overcurrent between output phases and earth drive || overload of output voltage drive || short-circuit protection drive || m

Relative Humidity:

5-95 % without condensation IEC 60068-2-3

Operating Altitude:

1000...4800 m with current derating 1 % per 100 m || <= 3280.84 ft (1000 m) without derating

Output Voltage:

<= power supply voltage

[Us] Rated Supply Voltage:

380...480 V

Asynchronous Motor Control Profile:

variable torque standard || optimized torque mode

Apparent Power:

4.5 kVA 480 V heavy duty) || 5.6 kVA 480 V normal duty)

Depth:

300 mm

Discrete Output Number:

0

Supply:

internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection || internal supply for digital inputs and STO 24 V DC 21-27 V), <200 mA overload and short-circuit protection || external suppl

Switching Frequency:

4...12 kHz with derating factor || 2...12 kHz adjustable

Overvoltage Category:

III

Method Of Access:

slave Modbus TCP

Analogue Input Number:

3

Maximum Transient Current:

10.2 A 60 s normal duty) || 10.8 A 60 s heavy duty)

Acceleration And Deceleration Ramps:

linear adjustable separately from 0.01...9999 s

Discrete Input Logic:

positive logic (source) DI1...DI8), < 5 V, > 11 V || negative logic (sink) DI1...DI8), > 16 V, < 10 V

Permissible Temporary Current Boost:

1.5 x In 60 s heavy duty) || 1.1 x In 60 s normal duty)

Safety Function:

STO (safe torque off) SIL 3

Eu Rohs Directive:

Pro-active compliance (Product out of EU RoHS legal scope)

Insulation Resistance:

> 1 MOhm 500 V DC for 1 minute to earth

Rohs Exemption Information:

Yes

Pollution Degree:

2 IEC 61800-5-1

Emc Filter:

integrated 50 m IEC 61800-3 category C2 || integrated 150 m IEC 61800-3 category C3

Minimum Switching Current:

relay output R1, R2, R3 5 mA 24 V DC

Vibration Resistance:

1 gn 13-200 Hz)IEC 60068-2-6 || 1.5 mm peak to peak 2-13 Hz)IEC 60068-2-6

Pollution Degree:

3

Regulation Loop:

adjustable PID regulator

Ip Degree Of Protection:

IP55IEC 60529 || IP55IEC 61800-5-1

Continuous Output Current:

7.2 A 4 kHz heavy duty || 9.3 A 4 kHz normal duty

Datasheet:

View