Schneider Electric

Schneider Electric ATV930D90N4C Atv930 Ip21 90Kw 400V/480V W/O Braking C

(No reviews yet) Write a Review

Write a Review

Schneider Electric

Schneider Electric ATV930D90N4C Atv930 Ip21 90Kw 400V/480V W/O Braking C

Rating Required Select Rating 1 star (worst) 2 stars 3 stars (average) 4 stars 5 stars (best)

Name

Email Required

Review Subject Required

Comments Required

SKU:

ATV930D90N4C

UPC:

3606480883446

MPN:

Condition:

New

Discrete Output Number:

2

Environmental Characteristic:

chemical pollution resistance class 3C3 IEC 60721-3-3 || dust pollution resistance class 3S3 IEC 60721-3-3

Discrete Input Logic:

positive logic (source) DI1...DI8), < 5 V, > 11 V || negative logic (sink) DI1...DI8), > 16 V, < 10 V || positive logic (source) DI7, DI8), < 0.6 V, > 2.5 V || positive logic (source) STOA, STOB), < 5 V, > 11 V

Weee:

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

Discrete Input Number:

10

Eu Rohs Directive:

Pro-active compliance (Product out of EU RoHS legal scope)

Environmental Disclosure:

ENVPEP1411014EN

4 Quadrant Operation Possible:

FALSE

California Proposition 65:

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Number Of Addresses:

1-247

Data Format:

8 bits, configurable odd, even or no parity Modbus serial

Operating Position:

vertical +/- 10 degree

With Safety Function Safe Programmable Logic:

FALSE

Maximum Switching Current:

relay output R1 resistive, cos phi = 1 3 A 250 V AC || relay output R1 resistive, cos phi = 1 3 A 30 V DC || relay output R1 inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1 inductive, cos phi = 0.4 7 ms 2 A 30 V DC || relay output R2, R

Volume Of Cooling Air:

295 m3/h

Degree Of Protection:

UL type 1

Transmission Frame:

RTU

Line Current:

156.2 A 380 V normal duty) || 134.3 A 380 V heavy duty) || 135.8 A 480 V normal duty) || 118.1 A 480 V heavy duty)

Depth:

325.5 mm

Maximum Thdi:

<48 % from 80...100 % of load IEC 61000-3-12

Base Load Current At High Overload:

145.0 A

Brake Chopper Integrated:

FALSE

Noise Level:

68.3 dB 86/188/EEC

Local Signalling:

local diagnostic 3 LED mono/dual colour) || embedded communication status 5 LED dual colour) || communication module status 2 LED dual colour) || presence of voltage 1 LED red)

Ip Degree Of Protection:

IP21

Insulation Resistance:

> 1 MOhm 500 V DC for 1 minute to earth

Height:

922 mm

Analogue Output Number:

2

With Safety Function Safe Torque Off (Sto):

TRUE

Product Or Component Type:

variable speed drive

Input Compatibility:

DI1...DI8 discrete input level 1 PLC IEC 61131-2 || DI7, DI8 pulse input level 1 PLC IEC 65A-68 || STOA, STOB discrete input level 1 PLC IEC 61131-2

Nominal Switching Frequency:

2.5 kHz

Asynchronous Motor Control Profile:

variable torque standard || constant torque standard || optimized torque mode

Relative Humidity:

5-95 % without condensation IEC 60068-2-3

Relay Output Type:

configurable relay logic R1 fault relay NO/NC 100000 cycles || configurable relay logic R2 sequence relay NO 1000000 cycles || configurable relay logic R3 sequence relay NO 1000000 cycles

Transmission Rate:

10/100 Mbit/s Ethernet IP/Modbus TCP || 4.8, 9.6, 19.2, 38.4 kbit/s Modbus serial

Supply:

external supply for digital inputs 24 V DC 19-30 V), <1.25 mA overload and short-circuit protection || internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection || internal supply for d

Discrete Input Type:

DI1...DI8 programmable, 24 V DC <= 30 V)3.5 kOhm || DI7, DI8 programmable as pulse input 0-30 kHz, 24 V DC <= 30 V) || STOA, STOB safe torque off, 24 V DC <= 30 V)> 2.2 kOhm

Exchange Mode:

half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP

Phase:

3 phase

Mercury Free:

Yes

Product Destination:

asynchronous motors || synchronous motors

Reach Regulation:

Reference contains Substances of Very High Concern above the threshold

Pollution Degree:

2

[Us] Rated Supply Voltage:

380...480 V - 15...10 %

Communication Port Protocol:

EtherNet/IP || Modbus serial || Modbus TCP

Analogue Input Number:

3

Maximum Acceleration Under Shock Impact (During Operation):

150 m/s² at 11 ms

Base Load Current At Low Overload:

173.0 A

Operating Altitude:

<= 3280.84 ft (1000 m) without derating || 1000...4800 m with current derating 1 % per 100 m

With Safety Function Safely Limited Speed (Sls):

TRUE

Upgradeability:

Upgraded components available

Electrical Connection:

control screw terminal 0.5...1.5 mm² AWG 20...AWG 16 || line side screw terminal 120 mm² AWG 4/0...250 kcmil || motor screw terminal 120 mm² 250 kcmil || DC bus screw terminal 95...120 mm² AWG 3/0...250 kcmil

Discrete Output Type:

logic output DQ+ 0-1 kHz <= 30 V DC 100 mA || programmable as pulse output DQ+ 0-30 kHz <= 30 V DC 20 mA || logic output DQ- 0-1 kHz <= 30 V DC 100 mA

Shock Resistance:

15 gn 11 ms IEC 60068-2-27

Ambient Air Transport Temperature:

-40-70 °C

Maximum Transient Current:

207.6 A 60 s normal duty) || 217.5 A 60 s heavy duty)

Relative Symmetric Network Frequency Tolerance:

0.05

Permitted Relative Humidity (During Operation):

class 3K5 according to EN 60721-3

Option Card:

slot A communication module Profibus DP V1 || slot A communication module PROFINET || slot A communication module DeviceNet || slot A communication module EtherCAT || slot A communication module CANopen daisy chain RJ45 || slot A communication module

Braking To Standstill:

by DC injection

Variant:

without braking chopper || standard version

With Safety Function Safe Position (Sp):

FALSE

Noise Level:

68.3 dB

Circularity Profile:

ENVEOLI1411014EN

Standards:

UL 508C || IEC 61800-3 || IEC 61800-5-1 || IEC 61000-3-12 || IEC 60721-3 || IEC 61508 || IEC 13849-1

China Rohs Regulation:

X

Regulation Loop:

adjustable PID regulator

Protection Type:

thermal protection motor || safe torque off motor || motor phase break motor || thermal protection drive || safe torque off drive || overheating drive || overcurrent between output phases and earth drive || overload of output voltage drive || short-c

With Sft Fct Safe Stop 2 (Ss2):

FALSE

Motor Power Kw:

90.0 kW normal duty || 75.0 kW heavy duty

Linearity Error:

AI1, AI2, AI3 +/- 0.15 % of maximum value analog input || AQ1, AQ2 +/- 0.2 % analog output

Range Of Product:

Altivar Process ATV900

Sustainable Offer Status:

Green Premium product

Data Format:

8 bits, configurable odd, even or no parity

Electromagnetic Compatibility:

electrostatic discharge immunity test level 3 IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge im

Overvoltage Category:

III

Product Specific Application:

process for industrial

Marking:

CE

Transmission Rate:

10, 100 Mbits || 4.8 kbps || 9600 bit/s || 19200 bit/s

Switching Frequency:

1...8 kHz adjustable || 2.5...8 kHz with derating factor

Synchronous Motor Control Profile:

permanent magnet motor || synchronous reluctance motor

Ambient Air Temperature For Storage:

-40-70 °C

Discrete Input Logic:

16 preset speeds

Quantity Per Set:

1

Isolation:

between power and control terminals

Width:

290 mm

Power Dissipation In W:

natural convection 196 W 380 V 2.5 kHz || forced convection 1585 W 380 V 2.5 kHz

Net Weight:

58.5 kg

Minimum Switching Current:

relay output R1, R2, R3 5 mA 24 V DC

Apparent Power:

112.9 kVA 480 V normal duty) || 98.2 kVA 480 V heavy duty)

Number Of Addresses:

1-247 Modbus serial

Method Of Access:

slave Modbus TCP

Analogue Output Type:

software-configurable voltage AQ1, AQ2 0...10 V DC 470 Ohm 10 bits || software-configurable current AQ1, AQ2 0...20 mA 500 Ohm 10 bits

Product Certifications:

UL || TÜV || CSA

Acceleration And Deceleration Ramps:

linear adjustable separately from 0.01...9999 s

Maximum Output Frequency:

599 Hz

Emc Filter:

integrated || with EMC plate option

Vibration Resistance:

1.5 mm peak to peak 2-13 Hz)IEC 60068-2-6 || 1 gn 13-200 Hz)IEC 60068-2-6

Connector Type:

2 RJ45 || 1 RJ45

With Safety Function Safe Operating Stop (Sos):

FALSE

With Safety Function Safely Limited Position (Slp):

FALSE

Mounting Mode:

wall mount

Network Frequency:

50-60 Hz

Relay Output Number:

3

Environmental Class (During Operation):

class 3C3 according to IEC 60721-3-3 || class 3S3 according to IEC 60721-3-3

With Safety Function Safe Speed Monitor (Ssm):

FALSE

Maximum Deflection Under Vibratory Load (During Operation):

1.5 mm at 2...13 Hz

With Safety Function Safe Brake Management (Sbc/Sbt):

TRUE

Physical Interface:

Ethernet || 2-wire RS 485

Maximum Output Voltage:

480.0 V

Type Of Polarization:

no impedance

Device Application:

Industrial Application

Motor Slip Compensation:

not available in permanent magnet motor law || automatic whatever the load || adjustable || can be suppressed

Ambient Air Temperature For Operation:

-15-50 °C without derating) || 50-60 °C with derating factor)

Prospective Line Isc:

50 kA

With Safety Function Safe Direction (Sdi):

FALSE

Maximum Acceleration Under Vibrational Stress (During Operation):

10 m/s² at 13...200 Hz

With Safety Function Safe Stop 1 (Ss1):

TRUE

Rohs Exemption Information:

Yes

Sampling Duration:

2 ms +/- 0.5 ms DI1...DI8) - discrete input || 5 ms +/- 1 ms DI7, DI8) - pulse input || 1 ms +/- 1 ms AI1, AI2, AI3) - analog input || 5 ms +/- 1 ms AQ1, AQ2) - analog output

Type Of Polarization:

no impedance Modbus serial

Refresh Time:

relay output R1, R2, R3)5 ms +/- 0.5 ms)

Accuracy:

+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input || +/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output

Continuous Output Current:

173 A 2.5 kHz normal duty || 145 A 2.5 kHz heavy duty

Assembly Style:

enclosed

Analogue Input Type:

AI1, AI2, AI3 software-configurable voltage 0...10 V DC 30 kOhm 12 bits || AI1, AI2, AI3 software-configurable current 0...20 mA/4...20 mA 250 Ohm 12 bits

Catalog:

View

Datasheet:

View