local diagnostic 3 LED mono/dual colour) || embedded communication status 5 LED dual colour) || communication module status 2 LED dual colour) || presence of voltage 1 LED red)
Overvoltage Category:
III
Operating Altitude:
<= 3280.84 ft (1000 m) without derating || 1000...4800 m with current derating 1 % per 100 m
Braking To Standstill:
by DC injection
Width:
264 mm
Data Format:
8 bits, configurable odd, even or no parity Modbus serial
Permitted Relative Humidity (During Operation):
class 3K5 according to EN 60721-3
Analogue Output Type:
software-configurable voltage AQ1, AQ2 0...10 V DC 470 Ohm 10 bits || software-configurable current AQ1, AQ2 0...20 mA 500 Ohm 10 bits
Product Destination:
asynchronous motors || synchronous motors
Product Or Component Type:
variable speed drive
With Safety Function Safe Programmable Logic:
FALSE
Electromagnetic Compatibility:
electrostatic discharge immunity test level 3 IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge immu
Regulation Loop:
adjustable PID regulator
Maximum Switching Current:
relay output R1 resistive, cos phi = 1 3 A 250 V AC || relay output R1 resistive, cos phi = 1 3 A 30 V DC || relay output R1 inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1 inductive, cos phi = 0.4 7 ms 2 A 30 V DC || relay output R2, R
Maximum Thdi:
<48 % full load IEC 61000-3-12
Range Of Product:
Altivar Process ATV900
Mercury Free:
Yes
4 Quadrant Operation Possible:
TRUE
Type Of Polarization:
no impedance
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Apparent Power:
1.1 kVA 480 V normal duty) || 0.7 kVA 480 V heavy duty)
2...16 kHz adjustable || 4...16 kHz with derating factor
Ambient Air Temperature For Operation:
-15-40 °C without derating) || 40-50 °C with derating factor)
Noise Level:
52 dB
Product Certifications:
UL || CSA || TÜV || DNV-GL || Bureau Veritas || ABS || ATEX INERIS
Number Of Addresses:
1-247
With Safety Function Safe Torque Off (Sto):
TRUE
Acceleration And Deceleration Ramps:
linear adjustable separately from 0.01...9999 s
With Safety Function Safe Brake Management (Sbc/Sbt):
TRUE
Method Of Access:
slave Modbus TCP
With Safety Function Safe Speed Monitor (Ssm):
FALSE
Option Card:
slot A communication module Profibus DP V1 || slot A communication module PROFINET || slot A communication module DeviceNet || slot A communication module EtherCAT || slot A communication module CANopen daisy chain RJ45 || slot A communication module
Noise Level:
52 dB 86/188/EEC
Analogue Input Type:
AI1, AI2, AI3 software-configurable voltage 0...10 V DC 30 kOhm 12 bits || AI1, AI2, AI3 software-configurable current 0...20 mA/4...20 mA 250 Ohm 12 bits
With Safety Function Safe Direction (Sdi):
FALSE
Sampling Duration:
2 ms +/- 0.5 ms DI1...DI8) - discrete input || 5 ms +/- 1 ms DI7, DI8) - pulse input || 1 ms +/- 1 ms AI1, AI2, AI3) - analog input || 5 ms +/- 1 ms AQ1, AQ2) - analog output
Relay Output Number:
3
Discrete Output Type:
logic output DQ+ 0-1 kHz <= 30 V DC 100 mA || programmable as pulse output DQ+ 0-30 kHz <= 30 V DC 20 mA || logic output DQ- 0-1 kHz <= 30 V DC 100 mA
Quantity Per Set:
1
Supply:
external supply for digital inputs 24 V DC 19-30 V), <1.25 mA overload and short-circuit protection || internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection || internal supply for d
Motor Slip Compensation:
adjustable || can be suppressed || not available in permanent magnet motor law || automatic whatever the load
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Shock Resistance:
15 gn 11 ms IEC 60068-2-27
Electrical Connection:
control screw terminal 0.5...1.5 mm² || line side screw terminal 4...6 mm² || motor screw terminal 4...6 mm² || DC bus screw terminal 2.5...6 mm²
Transmission Frame:
RTU
Brake Chopper Integrated:
TRUE
Environmental Class (During Operation):
class 3C3 according to IEC 60721-3-3 || class 3S3 according to IEC 60721-3-3
Upgradeability:
Upgraded components available
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Discrete Output Number:
2
Product Specific Application:
process for industrial
Height:
678 mm
Pollution Degree:
2
Synchronous Motor Control Profile:
permanent magnet motor || synchronous reluctance motor
Line Current:
1.5 A 380 V normal duty) || 0.9 A 380 V heavy duty) || 1.3 A 480 V normal duty) || 0.8 A 480 V heavy duty)
Environmental Disclosure:
ENVPEP1508009EN
Connector Type:
2 RJ45 || 1 RJ45
Type Of Polarization:
no impedance Modbus serial
Number Of Addresses:
1-247 Modbus serial
[Us] Rated Supply Voltage:
380...480 V - 15...10 %
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Maximum Output Voltage:
480.0 V
Relative Symmetric Network Frequency Tolerance:
0.05
Maximum Acceleration Under Vibrational Stress (During Operation):
10 m/s² at 13...200 Hz
Marking:
CE
Refresh Time:
relay output R1, R2, R3)5 ms +/- 0.5 ms)
Data Format:
8 bits, configurable odd, even or no parity
Analogue Input Number:
3
Discrete Input Logic:
16 preset speeds
Isolation:
between power and control terminals
Maximum Deflection Under Vibratory Load (During Operation):
1.5 mm at 2...13 Hz
Vibration Resistance:
1.5 mm peak to peak 2-13 Hz)IEC 60068-2-6 || 1 gn 13-200 Hz)IEC 60068-2-6
half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP
Depth:
300 mm
Device Application:
Industrial Application
Circularity Profile:
ENVEOLI1508009EN
China Rohs Regulation:
X
Prospective Line Isc:
50 kA
Maximum Acceleration Under Shock Impact (During Operation):
150 m/s² at 11 ms
Discrete Input Number:
10
Environmental Characteristic:
chemical pollution resistance class 3C3 IEC 60721-3-3 || dust pollution resistance class 3S3 IEC 60721-3-3
Asynchronous Motor Control Profile:
constant torque standard || variable torque standard || optimized torque mode
Linearity Error:
AI1, AI2, AI3 +/- 0.15 % of maximum value analog input || AQ1, AQ2 +/- 0.2 % analog output
Protection Type:
thermal protection motor || safe torque off motor || motor phase break motor || thermal protection drive || safe torque off drive || overheating drive || overcurrent between output phases and earth drive || overload of output voltage drive || short-c