Schneider Electric BCH2MM2022CF6C 130Mm 2000W 20Bit E. Oil S. Brk Mil
SKU:
BCH2MM2022CF6C
UPC:
3606480734410
MPN:
Condition:
New
Ambient Air Temperature For Operation:
0-40 °C
Shaft Length:
55 mm
Number Of Motor Stacks:
4
Maximum Mechanical Speed:
3000 rpm
Maximum Current Irms:
32.85 A LXM28... 2 kW, 220 V
Maximum Permanent Current:
11.25 A
Stator Electrical Time Constant:
13.24 ms 20 °C
Stator Resistance:
0.34 Ohm 20 °C
Rohs Exemption Information:
Yes
Maximum Axial Force Fa:
200 N
Type Of Cooling:
natural convection
Mounting Holes Diameter:
9.2 mm
Continuous Stall Torque:
9.55 N.m LXM28... 12 A, 220 V, three phase
Device Short Name:
BCH2
Sustainable Offer Status:
Green Premium product
Motor Flange Size:
130 mm
Shaft Diameter:
22 mm
Product Or Component Type:
servo motor
Electrical Connection:
connector MIL
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Maximum Radial Force Fr:
670 N 2000 rpm
Shaft End:
smooth shaft
Product Compatibility:
LXM28... servo drive 2 kW, 220 V, three phase
Holding Brake:
with
Mercury Free:
Yes
Ip Degree Of Protection:
IP50 IM V3 || IP65 IM B5, IM V1
Centring Collar Diameter:
110 mm
Net Weight:
11 kg
Number Of Mounting Holes:
4
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
China Rohs Regulation:
X
Back Emf Constant:
58 V/krpm 20 °C
Nominal Output Power:
2000 W LXM28... 12 A, 220 V, three phase
Mounting Support:
asian standard flange
Phase:
three phase
Peak Stall Torque:
28.65 N.m LXM28... 12 A, 220 V, three phase
Rotor Inertia:
14.1 kg.cm²
Length:
216 mm
Circularity Profile:
ENVEOLI1504002EN
Nominal Torque:
9.55 N.m LXM28... 12 A, 220 V, three phase
[Us] Rated Supply Voltage:
220 V
Feedback Type:
20 bits single turn absolute encoder
Nominal Speed:
2000 rpm LXM28... 12 A, 220 V, three phase
Reach Free Of Svhc:
Yes
Range Compatibility:
Lexium 28
Brake Pull-In Power:
19.7 W
Torque Constant:
0.96 N.m/A 20 °C
Environmental Disclosure:
ENVPEP1504002EN
Holding Torque:
9.6 N.m built-in
Stator Inductance:
4.5 mH 20 °C
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Reach Regulation:
Free of Substances of Very High Concern above the threshold
This product is part of the Lexium 28 range, an offer of servo motors from 0.05kW to 4.5kW. The servo motor features maximum mechanical speed of 3000RPM and keyed shaft end with holding brake. It is...
This product is part of the Lexium 28 range, an offer of servo motors from 0.05kW to 4.5kW. The servo motor features maximum mechanical speed of 3000RPM and smooth shaft end without holding brake. It...
