Schneider Electric BCH2MM2023CA6C 130Mm 2000W 20Bit E. Oil S. Key Mil

(No reviews yet) Write a Review
SKU:
BCH2MM2023CA6C
UPC:
3606480734427
Condition:
New
Product Or Component Type:
servo motor
Maximum Permanent Current:
11.25 A
Torque Constant:
0.96 N.m/A 20 °C
Number Of Motor Stacks:
4
Continuous Stall Current:
9.95 A
Peak Stall Torque:
28.65 N.m LXM26D 12 A, 220 V, three phase || 28.65 N.m LXM28... 12 A, 220 V, three phase || 28.65 N.m
Length:
187 mm
Mounting Holes Diameter:
9.2 mm
Stator Inductance:
4.5 mH 20 °C
Ip Degree Of Protection:
IP50 IM V3 || IP65 IM B5, IM V1
Maximum Current Irms:
32.85 A LXM28... 2 kW, 220 V || 32.85 A 2 kW, 220 V
Maximum Mechanical Speed:
3000 rpm
Mounting Support:
asian standard flange
Feedback Type:
20 bits single turn absolute encoder
Product Compatibility:
LXM26D servo drive 2 kW, 220 V, three phase || LXM28... servo drive 2 kW, 220 V, three phase
Stator Resistance:
0.34 Ohm 20 °C
Net Weight:
9.7 kg
Rohs Exemption Information:
Yes
Shaft End:
keyed
[Us] Rated Supply Voltage:
220 V
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Centring Collar Depth:
8 mm
Nominal Output Power:
2000 W LXM26D 12 A, 220 V, three phase || 2000 W LXM28... 12 A, 220 V, three phase || 2000 W
Phase:
three phase
Circle Diameter Of The Mounting Holes:
145 mm
Type Of Cooling:
natural convection
Shaft Length:
55 mm
Distance Shaft Shoulder-Flange:
8 mm
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Rotor Inertia:
13.5 kg.cm²
Shaft Diameter:
22 mm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Nominal Speed:
2000 rpm || 2000 rpm LXM26D 12 A, 220 V, three phase || 2000 rpm LXM28... 12 A, 220 V, three phase
Stator Electrical Time Constant:
13.24 ms 20 °C
Mercury Free:
Yes
Number Of Mounting Holes:
4
Brake Pull-In Power:
19.7 W
Electrical Connection:
connector MIL
Continuous Stall Torque:
9.55 N.m LXM26D 12 A, 220 V, three phase || 9.55 N.m LXM28... 12 A, 220 V, three phase || 9.55 N.m
China Rohs Regulation:
X
Reach Free Of Svhc:
Yes
Pvc Free:
Yes
Device Short Name:
BCH2
Sustainable Offer Status:
Green Premium product
Environmental Disclosure:
ENVPEP1504002EN
Maximum Radial Force Fr:
670 N 2000 rpm
Centring Collar Diameter:
110 mm
Continuous Power:
2000 W
Motor Flange Size:
130 mm
Holding Brake:
without
Ambient Air Temperature For Operation:
-20-40 °C
Maximum Axial Force Fa:
200 N
Range Compatibility:
Lexium 28
Nominal Torque:
9.55 N.m LXM26D 12 A, 220 V, three phase || 9.55 N.m LXM28... 12 A, 220 V, three phase || 9.55 N.m
Circularity Profile:
ENVEOLI1504002EN
Key Width:
8 mm
Back Emf Constant:
58 V/krpm 20 °C
Catalog:
View
Datasheet:
View
$1,372.45

Description

This product is part of the Lexium 28 range, an offer of motion servo drives for machines from 0.05 to 4.5kW. The brushless servo motor features a high moment of inertia with maximum mechanical speed of 3000RPM and IP65 parallel keyed shaft without holding brake. It is equipped with a 20bit single-turn absolute encoder, optimized in terms of torque and speed of rotation (2000RPM). It is a second generation servo motors suitable for a wide variety of applications due to the different levels of motor inertia offered. It has a rated supply voltage of 220V, a continuous stall current of 9.95A and a continuous power of 2000W. The shaft dimensions are 22mm (Diameter) x 55mm (Length). It is furnished with MIL connector for electrical connection. It is an IP50 (IM V3) and IP65 (IM B5, IM V1) rated product. Its dimensions are 187mm (Length) x 130mm (Width), centring collar dimensions are 8mm (Depth) x 110mm (Diameter) with 145mm circle diameter of the mounting hole. It weighs 9.7kg. This product is compatible with Lexium 28 and Lexium 26D servo drives. It supports Asian standard 130mm flange mount with a natural convection cooling system. Lexium 28 and Lexium BCH2, the optimized servo bundle for all motion control solutions are cost effective, energy efficient and embedded safety. Lexium 28 servo drives and Lexium BCH2 servo motors, optimized servo bundles for compact machines.
View AllClose