Schneider Electric BMH0701T36F2A Motor 70Mm Iec 1,4Nm Ip65/67 690W Key
SKU:
BMH0701T36F2A
UPC:
3.60649E+12
MPN:
Condition:
New
Continuous Power:
1.05 W
Brake Pull-In Power:
7 W
Mounting Support:
international standard flange
Back Emf Constant:
31.17 V/krpm 120 °C
Stator Resistance:
3.2 Ohm 20 °C
Sustainable Offer Status:
Green Premium product
Maximum Current Irms:
9.6 A LXM32.D18M2 || 9.6 A LXM32.U90M2
Holding Brake:
with
Key Width:
18 mm
Second Shaft:
without second shaft end
[Us] Rated Supply Voltage:
240 V
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Stator Electrical Time Constant:
2.8 ms 20 °C
Number Of Motor Stacks:
1
Maximum Axial Force Fa:
0.2 x Fr
Stator Inductance:
9.1 mH 20 °C
Rohs Exemption Information:
Yes
Speed Feedback Resolution:
32768 points/turn
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Shaft Length:
23 mm
Warranty:
18 months
Electrical Connection:
rotatable right-angled connectors
Shaft Diameter:
11 mm
Nominal Output Power:
450 W LXM32.U90M2 3 A, 230 V, single phase || 350 W LXM32.D18M2 6 A, 115 V, single phase
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Product Compatibility:
LXM32.D18M2 115 V single phase || LXM32.U90M2 230 V single phase
Mounting Holes Diameter:
5.5 mm
Range Compatibility:
Lexium 32
Centring Collar Depth:
2.5 mm
Maximum Radial Force Fr:
660 N 1000 rpm || 520 N 2000 rpm || 460 N 3000 rpm || 410 N 4000 rpm || 380 N 5000 rpm || 360 N 6000 rpm
Shaft End:
keyed
Length:
161 mm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Continuous Stall Torque:
1.4 N.m LXM32.U90M2 3 A, 230 V, single phase || 1.4 N.m LXM32.D18M2 6 A, 115 V, single phase
Circle Diameter Of The Mounting Holes:
82 mm
Net Weight:
2.6 kg
Nominal Torque:
1.1 N.m LXM32.U90M2 3 A, 230 V, single phase || 1.35 N.m LXM32.D18M2 6 A, 115 V, single phase
Pvc Free:
Yes
Environmental Disclosure:
ENVPEP111002EN
Maximum Mechanical Speed:
8000 rpm
China Rohs Regulation:
X
Feedback Type:
single turn SinCos Hiperface
Mercury Free:
Yes
Product Or Component Type:
servo motor
Motor Flange Size:
70 mm
Peak Stall Torque:
4 N.m LXM32.U90M2 3 A, 230 V, single phase || 4.2 N.m LXM32.D18M2 6 A, 115 V, single phase
Holding Torque:
3 N.m holding brake
Torque Constant:
0.49 N.m/A 120 °C
Device Short Name:
BMH
Ip Degree Of Protection:
IP65 standard || IP67 with IP67 kit
Number Of Motor Poles:
10
Circularity Profile:
N/A
Centring Collar Diameter:
60 mm
Continuous Stall Current:
2.85 A
Phase:
three phase
Maximum Permanent Current:
9.56 A
Nominal Speed:
4000 rpm LXM32.U90M2 3 A, 230 V, single phase || 2500 rpm LXM32.D18M2 6 A, 115 V, single phase
