Schneider Electric BMH0702P37A2A Motor 70Mm Iec 2,5Nm Ip65/67 1160W Key
$1,273.50
Schneider Electric
Schneider Electric BMH0702P36F2A Motor 70Mm Iec 2,5Nm Ip65/67 1160W Key
Schneider Electric
$1,193.91
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric BMH0702P36F2A Motor 70Mm Iec 2,5Nm Ip65/67 1160W Key
servo motor BMH, Lexium 32, 2.5Nm, 8000rpm, keyed shaft, with brake, IP65, IP67, 16bit encoder, 3 phases
- Type Of Cooling:
- natural convection
- Mounting Holes Diameter:
- 5.5 mm
- Stator Resistance:
- 3.8 Ohm 20 °C
- Maximum Axial Force Fa:
- 0.2 x Fr
- Nominal Torque:
- 2.2 N.m LXM32.D12N4 3 A, 400 V, three phase || 2.2 N.m LXM32.D12N4 3 A, 480 V, three phase
- Feedback Type:
- single turn SinCos Hiperface
- Back Emf Constant:
- 54.08 V/krpm 120 °C
- Centring Collar Depth:
- 2.5 mm
- Torque Constant:
- 0.84 N.m/A 120 °C
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Rotor Inertia:
- 1.24 kg.cm²
- Stator Inductance:
- 12.2 mH 20 °C
- Shaft Diameter:
- 11 mm
- Number Of Motor Stacks:
- 2
- Nominal Output Power:
- 700 W LXM32.D12N4 3 A, 400 V, three phase || 700 W LXM32.D12N4 3 A, 480 V, three phase
- Electrical Connection:
- rotatable right-angled connectors
- Holding Brake:
- with
- Rohs Exemption Information:
- Yes
- Maximum Radial Force Fr:
- 710 N 1000 rpm || 560 N 2000 rpm || 490 N 3000 rpm || 450 N 4000 rpm || 410 N 5000 rpm || 390 N 6000 rpm
- Motor Flange Size:
- 70 mm
- Device Short Name:
- BMH
- Environmental Disclosure:
- ENVPEP111002EN
- Centring Collar Diameter:
- 60 mm
- Mercury Free:
- Yes
- Maximum Permanent Current:
- 9.68 A
- Mounting Support:
- international standard flange
- Circle Diameter Of The Mounting Holes:
- 82 mm
- Shaft Length:
- 23 mm
- Peak Stall Torque:
- 7.4 N.m LXM32.D12N4 3 A, 400 V, three phase || 7.4 N.m LXM32.D12N4 3 A, 480 V, three phase
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Continuous Stall Torque:
- 2.5 N.m LXM32.D12N4 3 A, 400 V, three phase || 2.5 N.m LXM32.D12N4 3 A, 480 V, three phase
- Shaft End:
- keyed
- Key Width:
- 18 mm
- Sustainable Offer Status:
- Green Premium product
- Brake Pull-In Power:
- 7 W
- Circularity Profile:
- N/A
- Net Weight:
- 3.3 kg
- Nominal Speed:
- 3000 rpm LXM32.D12N4 3 A, 400 V, three phase || 3000 rpm LXM32.D12N4 3 A, 480 V, three phase
- Phase:
- three phase
- Warranty:
- 18 months
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- [Us] Rated Supply Voltage:
- 480 V
- Continuous Power:
- 1.51 W
- Pvc Free:
- Yes
- Stator Electrical Time Constant:
- 3.2 ms 20 °C
- Number Of Motor Poles:
- 10
- Second Shaft:
- without second shaft end
- Speed Feedback Resolution:
- 32768 points/turn
- Holding Torque:
- 3 N.m holding brake
- Length:
- 193 mm
- Number Of Mounting Holes:
- 4
- Product Compatibility:
- LXM32.D12N4 400...480 V three phase
- China Rohs Regulation:
- X
- Range Compatibility:
- Lexium 32
- Continuous Stall Current:
- 2.94 A
- Maximum Mechanical Speed:
- 8000 rpm
- Maximum Current Irms:
- 9.7 A LXM32.D12N4
- Ip Degree Of Protection:
- IP65 standard || IP67 with IP67 kit
- Product Or Component Type:
- servo motor
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Datasheet:
- View
-
-
Schneider Electric BMH0702P37F2A Motor 70Mm Iec 2,5Nm Ip65/67 1160W Key
$2,252.50Schneider Electric
-
Schneider Electric BMH0702P32A1A Motor 70Mm Iec 2,5Nm Ip65/67 1160W Key
$3,271.30Schneider Electric
-
