Schneider Electric BMH0702T01A2A Motor 70Mm Iec 2,5Nm Ip54 1160W No Key
SKU:
BMH0702T01A2A
UPC:
3606485199917
MPN:
Condition:
New
Shaft End:
smooth shaft
Continuous Stall Current:
5.38 A
Centring Collar Depth:
2.5 mm
Sustainable Offer Status:
Green Premium product
Range Compatibility:
Lexium 32
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Environmental Disclosure:
ENVPEP111002EN
Product Compatibility:
LXM32.D30M2 115 V single phase || LXM32.D18M2 230 V single phase
Length:
154 mm
Shaft Length:
23 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Nominal Speed:
2500 rpm LXM32.D30M2 10 A, 115 V, single phase || 4000 rpm LXM32.D18M2 6 A, 230 V, single phase
Product Or Component Type:
servo motor
Mercury Free:
Yes
Ip Degree Of Protection:
IP54 standard
Peak Stall Torque:
6.4 N.m LXM32.D30M2 10 A, 115 V, single phase || 7.4 N.m LXM32.D18M2 6 A, 230 V, single phase
Torque Constant:
0.46 N.m/A 120 °C
Mounting Support:
international standard flange
Phase:
three phase
Device Short Name:
BMH
[Us] Rated Supply Voltage:
240 V
Nominal Output Power:
600 W LXM32.D30M2 10 A, 115 V, single phase || 900 W LXM32.D18M2 6 A, 230 V, single phase
Centring Collar Diameter:
60 mm
Motor Flange Size:
70 mm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Continuous Stall Torque:
2.5 N.m LXM32.D30M2 10 A, 115 V, single phase || 2.5 N.m LXM32.D18M2 6 A, 230 V, single phase
Second Shaft:
without second shaft end
Warranty:
18 months
Nominal Torque:
2.3 N.m LXM32.D30M2 10 A, 115 V, single phase || 2.1 N.m LXM32.D18M2 6 A, 230 V, single phase
Stator Electrical Time Constant:
3.1 ms 20 °C
Continuous Power:
1.51 W
Mounting Holes Diameter:
5.5 mm
Maximum Radial Force Fr:
710 N 1000 rpm || 560 N 2000 rpm || 490 N 3000 rpm || 450 N 4000 rpm || 410 N 5000 rpm || 390 N 6000 rpm
Stator Inductance:
3.6 mH 20 °C
Maximum Current Irms:
15 A LXM32.D30M2 || 17.5 A LXM32.D18M2
Electrical Connection:
rotatable right-angled connectors
Speed Feedback Resolution:
131072 points/turn
Circle Diameter Of The Mounting Holes:
82 mm
Type Of Cooling:
natural convection
Shaft Diameter:
11 mm
Feedback Type:
single turn SinCos Hiperface
Pvc Free:
Yes
Rohs Exemption Information:
Yes
Maximum Axial Force Fa:
0.2 x Fr
Stator Resistance:
1.15 Ohm 20 °C
Number Of Motor Stacks:
2
Rotor Inertia:
1.13 kg.cm²
Maximum Mechanical Speed:
8000 rpm
Net Weight:
2.3 kg
Circularity Profile:
N/A
Number Of Mounting Holes:
4
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
This product is part of the Lexium 32 range, an offer of servo motors from 0.15kW to 11kW. The 10-pole servo motor features maximum mechanical speed of 8000RPM and keyed shaft end without holding...
