Schneider Electric BMH0702T16F2A Motor 70Mm Iec 2,5Nm Ip54 1080W Key
SKU:
BMH0702T16F2A
UPC:
3606485194745
MPN:
Condition:
New
Range Compatibility:
Lexium 32
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Centring Collar Diameter:
60 mm
Maximum Axial Force Fa:
0.2 x Fr
Product Compatibility:
LXM32.D30M2 115 V single phase || LXM32.D18M2 230 V single phase
Nominal Torque:
2.3 N.m LXM32.D30M2 10 A, 115 V, single phase || 2.1 N.m LXM32.D18M2 6 A, 230 V, single phase
Key Width:
18 mm
Centring Collar Depth:
2.5 mm
Nominal Speed:
2500 rpm LXM32.D30M2 10 A, 115 V, single phase || 4000 rpm LXM32.D18M2 6 A, 230 V, single phase
Nominal Output Power:
600 W LXM32.D30M2 10 A, 115 V, single phase || 900 W LXM32.D18M2 6 A, 230 V, single phase
Sustainable Offer Status:
Green Premium product
Circle Diameter Of The Mounting Holes:
82 mm
Mercury Free:
Yes
Number Of Mounting Holes:
4
Net Weight:
3.3 kg
Stator Inductance:
3.6 mH 20 °C
Number Of Motor Poles:
10
Feedback Type:
single turn SinCos Hiperface
Holding Brake:
with
Electrical Connection:
rotatable right-angled connectors
Warranty:
18 months
Continuous Stall Torque:
2.5 N.m LXM32.D30M2 10 A, 115 V, single phase || 2.5 N.m LXM32.D18M2 6 A, 230 V, single phase
Mounting Holes Diameter:
5.5 mm
Continuous Stall Current:
5.38 A
Continuous Power:
1.51 W
Maximum Radial Force Fr:
710 N 1000 rpm || 560 N 2000 rpm || 490 N 3000 rpm || 450 N 4000 rpm || 410 N 5000 rpm || 390 N 6000 rpm
Length:
193 mm
Shaft Diameter:
11 mm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Ip Degree Of Protection:
IP54 standard
Stator Electrical Time Constant:
3.1 ms 20 °C
Torque Constant:
0.46 N.m/A 120 °C
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Environmental Disclosure:
ENVPEP111002EN
Brake Pull-In Power:
7 W
Phase:
three phase
Stator Resistance:
1.15 Ohm 20 °C
Number Of Motor Stacks:
2
Maximum Current Irms:
15 A LXM32.D30M2 || 17.5 A LXM32.D18M2
Speed Feedback Resolution:
32768 points/turn
[Us] Rated Supply Voltage:
240 V
Motor Flange Size:
70 mm
Holding Torque:
3 N.m holding brake
Mounting Support:
international standard flange
Second Shaft:
without second shaft end
Pvc Free:
Yes
Rotor Inertia:
1.24 kg.cm²
Shaft Length:
23 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Back Emf Constant:
29.6 V/krpm 120 °C
Maximum Permanent Current:
17.71 A
Type Of Cooling:
natural convection
Maximum Mechanical Speed:
8000 rpm
Circularity Profile:
N/A
China Rohs Regulation:
X
Rohs Exemption Information:
Yes
Product Or Component Type:
servo motor
Device Short Name:
BMH
Shaft End:
keyed
Peak Stall Torque:
6.4 N.m LXM32.D30M2 10 A, 115 V, single phase || 7.4 N.m LXM32.D18M2 6 A, 230 V, single phase
