Schneider Electric BMH0703P11F1A Motor 70Mm Iec 3,4Nm Ip54 1320W Key
SKU:
BMH0703P11F1A
UPC:
3606485199085
MPN:
Condition:
New
Net Weight:
4 kg
Warranty:
18 months
[Us] Rated Supply Voltage:
480 V
Maximum Axial Force Fa:
0.2 x Fr
Stator Electrical Time Constant:
3.2 ms 20 °C
Back Emf Constant:
55.8 V/krpm 120 °C
Maximum Permanent Current:
12.57 A
China Rohs Regulation:
X
Pvc Free:
Yes
Nominal Speed:
5000 rpm LXM32.D18N4 6 A, 400 V, three phase || 5000 rpm LXM32.D18N4 6 A, 480 V, three phase
Shaft End:
keyed
Peak Stall Torque:
10.2 N.m LXM32.D18N4 6 A, 400 V, three phase || 10.2 N.m LXM32.D18N4 6 A, 480 V, three phase
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Mercury Free:
Yes
Electrical Connection:
straight connectors
Number Of Motor Poles:
10
Ip Degree Of Protection:
IP54 standard
Number Of Mounting Holes:
4
Number Of Motor Stacks:
3
Nominal Torque:
2.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 2.4 N.m LXM32.D18N4 6 A, 480 V, three phase
Continuous Stall Current:
3.91 A
Holding Brake:
with
Key Width:
20 mm
Circularity Profile:
N/A
Length:
225 mm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Rohs Exemption Information:
Yes
Device Short Name:
BMH
Torque Constant:
0.87 N.m/A 120 °C
Continuous Power:
1.68 W
Shaft Length:
30 mm
Feedback Type:
single turn SinCos Hiperface
Maximum Current Irms:
12.6 A LXM32.D18N4
Phase:
three phase
Speed Feedback Resolution:
131072 points/turn
Centring Collar Diameter:
60 mm
Stator Inductance:
8.6 mH 20 °C
Motor Flange Size:
70 mm
Rotor Inertia:
1.78 kg.cm²
Stator Resistance:
2.65 Ohm 20 °C
Nominal Output Power:
1300 W LXM32.D18N4 6 A, 400 V, three phase || 1300 W LXM32.D18N4 6 A, 480 V, three phase
Sustainable Offer Status:
Green Premium product
Range Compatibility:
Lexium 32
Shaft Diameter:
14 mm
Continuous Stall Torque:
3.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 3.4 N.m LXM32.D18N4 6 A, 480 V, three phase
Holding Torque:
3 N.m holding brake
Product Compatibility:
LXM32.D18N4 400...480 V three phase
Circle Diameter Of The Mounting Holes:
82 mm
Centring Collar Depth:
2.5 mm
Second Shaft:
without second shaft end
Brake Pull-In Power:
7 W
Product Or Component Type:
servo motor
Type Of Cooling:
natural convection
Mounting Holes Diameter:
5.5 mm
Mounting Support:
international standard flange
Environmental Disclosure:
ENVPEP111002EN
Maximum Radial Force Fr:
730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The 10-pole servo motor features a medium moment of inertia with maximum mechanical speed...
This product is part of the Lexium 32 range, an offer of servo motors from 0.15kW to 11kW. The 10-pole servo motor features maximum mechanical speed of 8000RPM and keyed shaft end with holding brake...
