Schneider Electric BMH0703P17F2A Motor 70Mm Iec 3,4Nm Ip54 1320W Key
SKU:
BMH0703P17F2A
UPC:
3.60649E+12
MPN:
Condition:
New
Shaft End:
keyed
Phase:
three phase
China Rohs Regulation:
X
[Us] Rated Supply Voltage:
480 V
Speed Feedback Resolution:
32768 points/turn x 4096 turns
Net Weight:
4 kg
Number Of Motor Poles:
10
Torque Constant:
0.87 N.m/A 120 °C
Stator Resistance:
2.65 Ohm 20 °C
Nominal Speed:
5000 rpm LXM32.D18N4 6 A, 400 V, three phase || 5000 rpm LXM32.D18N4 6 A, 480 V, three phase
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Length:
225 mm
Maximum Current Irms:
12.6 A LXM32.D18N4
Continuous Stall Current:
3.91 A
Shaft Length:
30 mm
Continuous Stall Torque:
3.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 3.4 N.m LXM32.D18N4 6 A, 480 V, three phase
Circle Diameter Of The Mounting Holes:
82 mm
Maximum Permanent Current:
12.57 A
Mounting Holes Diameter:
5.5 mm
Type Of Cooling:
natural convection
Holding Torque:
3 N.m holding brake
Electrical Connection:
rotatable right-angled connectors
Peak Stall Torque:
10.2 N.m LXM32.D18N4 6 A, 400 V, three phase || 10.2 N.m LXM32.D18N4 6 A, 480 V, three phase
Nominal Torque:
2.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 2.4 N.m LXM32.D18N4 6 A, 480 V, three phase
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Rohs Exemption Information:
Yes
Device Short Name:
BMH
Rotor Inertia:
1.78 kg.cm²
Holding Brake:
with
Maximum Mechanical Speed:
8000 rpm
Range Compatibility:
Lexium 32
Stator Inductance:
8.6 mH 20 °C
Ip Degree Of Protection:
IP54 standard
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Sustainable Offer Status:
Green Premium product
Centring Collar Diameter:
60 mm
Second Shaft:
without second shaft end
Product Compatibility:
LXM32.D18N4 400...480 V three phase
Key Width:
20 mm
Number Of Motor Stacks:
3
Mercury Free:
Yes
Mounting Support:
international standard flange
Feedback Type:
multiturn SinCos Hiperface
Continuous Power:
1.68 W
Maximum Axial Force Fa:
0.2 x Fr
Number Of Mounting Holes:
4
Back Emf Constant:
55.8 V/krpm 120 °C
Warranty:
18 months
Motor Flange Size:
70 mm
Nominal Output Power:
1300 W LXM32.D18N4 6 A, 400 V, three phase || 1300 W LXM32.D18N4 6 A, 480 V, three phase
Pvc Free:
Yes
Shaft Diameter:
14 mm
Environmental Disclosure:
ENVPEP111002EN
Circularity Profile:
N/A
Brake Pull-In Power:
7 W
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Product Or Component Type:
servo motor
Stator Electrical Time Constant:
3.2 ms 20 °C
Maximum Radial Force Fr:
730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The 10-pole servo motor features a medium moment of inertia with maximum mechanical speed...
This product is part of the Lexium 32 range, an offer of servo motors from 0.15kW to 11kW. The 10-pole servo motor features maximum mechanical speed of 8000RPM and keyed shaft end with holding brake...
