Schneider Electric BMH0703T11A2A Motor 70Mm Iec 3,4Nm Ip54 1130W Key
SKU:
BMH0703T11A2A
UPC:
3606485200088
MPN:
Condition:
New
Sustainable Offer Status:
Green Premium product
Shaft Diameter:
14 mm
[Us] Rated Supply Voltage:
240 V
Type Of Cooling:
natural convection
Nominal Torque:
3.1 N.m LXM32.D30M2 10 A, 115 V, single phase || 2.9 N.m LXM32.D18M2 6 A, 230 V, single phase
Holding Brake:
without
Maximum Axial Force Fa:
0.2 x Fr
Circularity Profile:
N/A
Number Of Mounting Holes:
4
Device Short Name:
BMH
Ip Degree Of Protection:
IP54 standard
Electrical Connection:
rotatable right-angled connectors
Maximum Radial Force Fr:
730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
Shaft Length:
30 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Mounting Holes Diameter:
5.5 mm
Rohs Exemption Information:
Yes
Shaft End:
keyed
Number Of Motor Stacks:
3
Warranty:
18 months
Environmental Disclosure:
ENVPEP111002EN
Key Width:
20 mm
Continuous Power:
1.68 W
Continuous Stall Torque:
3.4 N.m LXM32.D30M2 10 A, 115 V, single phase || 3.4 N.m LXM32.D18M2 6 A, 230 V, single phase
Mercury Free:
Yes
Back Emf Constant:
39.3 V/krpm 120 °C
Second Shaft:
without second shaft end
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Maximum Permanent Current:
17.84 A
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Product Compatibility:
LXM32.D30M2 115 V single phase || LXM32.D18M2 230 V single phase
Feedback Type:
single turn SinCos Hiperface
Rotor Inertia:
1.67 kg.cm²
Stator Electrical Time Constant:
3.3 ms 20 °C
Number Of Motor Poles:
10
Net Weight:
3 kg
Nominal Speed:
2000 rpm LXM32.D30M2 10 A, 115 V, single phase || 3000 rpm LXM32.D18M2 6 A, 230 V, single phase
Nominal Output Power:
650 W LXM32.D30M2 10 A, 115 V, single phase || 900 W LXM32.D18M2 6 A, 230 V, single phase
Peak Stall Torque:
8.7 N.m LXM32.D30M2 10 A, 115 V, single phase || 10.2 N.m LXM32.D18M2 6 A, 230 V, single phase
Torque Constant:
0.61 N.m/A 120 °C
Product Or Component Type:
servo motor
Pvc Free:
Yes
Circle Diameter Of The Mounting Holes:
82 mm
Stator Inductance:
4.3 mH 20 °C
Continuous Stall Current:
5.55 A
China Rohs Regulation:
X
Length:
186 mm
Phase:
three phase
Centring Collar Depth:
2.5 mm
Stator Resistance:
1.32 Ohm 20 °C
Mounting Support:
international standard flange
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
