Schneider Electric BMH1001T01F2A Motor 100Mm Iec 3,4Nm Ip54 1350W No Key
SKU:
BMH1001T01F2A
UPC:
3606485200767
MPN:
Condition:
New
Torque Constant:
0.67 N.m/A 120 °C
Maximum Permanent Current:
19.38 A
Stator Inductance:
5.3 mH 20 °C
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Feedback Type:
single turn SinCos Hiperface
Ip Degree Of Protection:
IP54 standard
Shaft Diameter:
19 mm
Circularity Profile:
N/A
Back Emf Constant:
43.3 V/krpm 120 °C
Continuous Stall Current:
5.11 A
Continuous Power:
1.74 W
Circle Diameter Of The Mounting Holes:
115 mm
China Rohs Regulation:
X
Phase:
three phase
Stator Resistance:
1.19 Ohm 20 °C
Second Shaft:
without second shaft end
Device Short Name:
BMH
Pvc Free:
Yes
Maximum Mechanical Speed:
6000 rpm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Sustainable Offer Status:
Green Premium product
Length:
170.3 mm
Warranty:
18 months
Stator Electrical Time Constant:
4.5 ms 20 °C
Maximum Radial Force Fr:
900 N 1000 rpm || 720 N 2000 rpm || 630 N 3000 rpm || 570 N 4000 rpm || 530 N 5000 rpm
Holding Brake:
with
Rotor Inertia:
3.68 kg.cm²
Net Weight:
4.8 kg
Shaft End:
smooth shaft
Product Or Component Type:
servo motor
Environmental Disclosure:
ENVPEP111002EN
Mercury Free:
Yes
Nominal Speed:
2000 rpm LXM32.D30M2 10 A, 115 V, single phase || 3000 rpm LXM32.D18M2 6 A, 230 V, single phase
Type Of Cooling:
natural convection
Product Compatibility:
LXM32.D30M2 115 V single phase || LXM32.D18M2 230 V single phase
Number Of Mounting Holes:
4
Number Of Motor Poles:
10
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Centring Collar Depth:
3.5 mm
Maximum Current Irms:
15 A LXM32.D30M2 || 19.4 A LXM32.D18M2
Rohs Exemption Information:
Yes
Mounting Holes Diameter:
9 mm
Centring Collar Diameter:
95 mm
Mounting Support:
international standard flange
Motor Flange Size:
100 mm
Number Of Motor Stacks:
1
Nominal Output Power:
700 W LXM32.D30M2 10 A, 115 V, single phase || 900 W LXM32.D18M2 6 A, 230 V, single phase
Shaft Length:
40 mm
Speed Feedback Resolution:
131072 points/turn
Maximum Axial Force Fa:
0.2 x Fr
Peak Stall Torque:
8.9 N.m LXM32.D30M2 10 A, 115 V, single phase || 10.2 N.m LXM32.D18M2 6 A, 230 V, single phase
Nominal Torque:
3.3 N.m LXM32.D30M2 10 A, 115 V, single phase || 2.8 N.m LXM32.D18M2 6 A, 230 V, single phase
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
[Us] Rated Supply Voltage:
240 V
Holding Torque:
5.5 N.m holding brake
Electrical Connection:
rotatable right-angled connectors
Brake Pull-In Power:
12 W
Continuous Stall Torque:
3.4 N.m LXM32.D30M2 10 A, 115 V, single phase || 3.4 N.m LXM32.D18M2 6 A, 230 V, single phase
