Schneider Electric BMH1001T06A1A Motor 100Mm Iec 3,4Nm Ip54 1350W No Key
SKU:
BMH1001T06A1A
UPC:
3606485196985
MPN:
Condition:
New
Nominal Torque:
3.3 N.m LXM32.D30M2 10 A, 115 V, single phase || 2.8 N.m LXM32.D18M2 6 A, 230 V, single phase
Stator Electrical Time Constant:
4.5 ms 20 °C
Electrical Connection:
straight connectors
Nominal Speed:
2000 rpm LXM32.D30M2 10 A, 115 V, single phase || 3000 rpm LXM32.D18M2 6 A, 230 V, single phase
Pvc Free:
Yes
Continuous Stall Torque:
3.4 N.m LXM32.D30M2 10 A, 115 V, single phase || 3.4 N.m LXM32.D18M2 6 A, 230 V, single phase
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Back Emf Constant:
43.3 V/krpm 120 °C
[Us] Rated Supply Voltage:
240 V
Continuous Power:
1.74 W
Speed Feedback Resolution:
32768 points/turn
Maximum Radial Force Fr:
900 N 1000 rpm || 720 N 2000 rpm || 630 N 3000 rpm || 570 N 4000 rpm || 530 N 5000 rpm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Holding Brake:
without
Centring Collar Depth:
3.5 mm
Warranty:
18 months
Rohs Exemption Information:
Yes
Environmental Disclosure:
ENVPEP111002EN
Maximum Axial Force Fa:
0.2 x Fr
Sustainable Offer Status:
Green Premium product
Torque Constant:
0.67 N.m/A 120 °C
Number Of Mounting Holes:
4
Circularity Profile:
N/A
China Rohs Regulation:
X
Shaft Length:
40 mm
Phase:
three phase
Product Compatibility:
LXM32.D30M2 115 V single phase || LXM32.D18M2 230 V single phase
Second Shaft:
without second shaft end
Shaft Diameter:
19 mm
Product Or Component Type:
servo motor
Rotor Inertia:
3.19 kg.cm²
Mounting Support:
international standard flange
Maximum Current Irms:
15 A LXM32.D30M2 || 19.4 A LXM32.D18M2
Feedback Type:
single turn SinCos Hiperface
Motor Flange Size:
100 mm
Length:
128.6 mm
Type Of Cooling:
natural convection
Mounting Holes Diameter:
9 mm
Shaft End:
smooth shaft
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Range Compatibility:
Lexium 32
Ip Degree Of Protection:
IP54 standard
Stator Inductance:
5.3 mH 20 °C
Maximum Permanent Current:
19.38 A
Number Of Motor Poles:
10
Nominal Output Power:
700 W LXM32.D30M2 10 A, 115 V, single phase || 900 W LXM32.D18M2 6 A, 230 V, single phase
Continuous Stall Current:
5.11 A
Maximum Mechanical Speed:
6000 rpm
Mercury Free:
Yes
Net Weight:
3.34 kg
Circle Diameter Of The Mounting Holes:
115 mm
Stator Resistance:
1.19 Ohm 20 °C
Peak Stall Torque:
8.9 N.m LXM32.D30M2 10 A, 115 V, single phase || 10.2 N.m LXM32.D18M2 6 A, 230 V, single phase
Device Short Name:
BMH
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
