Schneider Electric BMH1001T17A2A Motor 100Mm Iec 3,4Nm Ip54 1350W Key
SKU:
BMH1001T17A2A
UPC:
3606485197227
MPN:
Condition:
New
Ip Degree Of Protection:
IP54 standard
Length:
128.6 mm
Sustainable Offer Status:
Green Premium product
Motor Flange Size:
100 mm
Peak Stall Torque:
8.9 N.m LXM32.D30M2 10 A, 115 V, single phase || 10.2 N.m LXM32.D18M2 6 A, 230 V, single phase
Pvc Free:
Yes
Net Weight:
3.34 kg
Phase:
three phase
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
[Us] Rated Supply Voltage:
240 V
Device Short Name:
BMH
Rotor Inertia:
3.19 kg.cm²
Circle Diameter Of The Mounting Holes:
115 mm
Maximum Radial Force Fr:
900 N 1000 rpm || 720 N 2000 rpm || 630 N 3000 rpm || 570 N 4000 rpm || 530 N 5000 rpm
Mercury Free:
Yes
Nominal Output Power:
700 W LXM32.D30M2 10 A, 115 V, single phase || 900 W LXM32.D18M2 6 A, 230 V, single phase
Nominal Speed:
2000 rpm LXM32.D30M2 10 A, 115 V, single phase || 3000 rpm LXM32.D18M2 6 A, 230 V, single phase
Speed Feedback Resolution:
32768 points/turn x 4096 turns
Back Emf Constant:
43.3 V/krpm 120 °C
Number Of Motor Poles:
10
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Compatibility:
LXM32.D30M2 115 V single phase || LXM32.D18M2 230 V single phase
Torque Constant:
0.67 N.m/A 120 °C
Nominal Torque:
3.3 N.m LXM32.D30M2 10 A, 115 V, single phase || 2.8 N.m LXM32.D18M2 6 A, 230 V, single phase
Feedback Type:
multiturn SinCos Hiperface
Maximum Permanent Current:
19.38 A
Mounting Holes Diameter:
9 mm
Stator Inductance:
5.3 mH 20 °C
Centring Collar Diameter:
95 mm
Continuous Power:
1.74 W
Maximum Current Irms:
15 A LXM32.D30M2 || 19.4 A LXM32.D18M2
Shaft Length:
40 mm
Centring Collar Depth:
3.5 mm
Rohs Exemption Information:
Yes
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Key Width:
30 mm
Shaft Diameter:
19 mm
Type Of Cooling:
natural convection
Environmental Disclosure:
ENVPEP111002EN
Continuous Stall Current:
5.11 A
Mounting Support:
international standard flange
Number Of Mounting Holes:
4
Stator Electrical Time Constant:
4.5 ms 20 °C
Electrical Connection:
rotatable right-angled connectors
Maximum Mechanical Speed:
6000 rpm
Stator Resistance:
1.19 Ohm 20 °C
China Rohs Regulation:
X
Maximum Axial Force Fa:
0.2 x Fr
Shaft End:
keyed
Circularity Profile:
N/A
Warranty:
18 months
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Holding Brake:
without
Second Shaft:
without second shaft end
Number Of Motor Stacks:
1
Continuous Stall Torque:
3.4 N.m LXM32.D30M2 10 A, 115 V, single phase || 3.4 N.m LXM32.D18M2 6 A, 230 V, single phase
