null
Schneider Electric BMH1002P11A2A Motor 100Mm Iec 5,9Nm Ip54 2060W Key

Schneider Electric BMH1002P11A2A Motor 100Mm Iec 5,9Nm Ip54 2060W Key

Schneider Electric
SKU:
BMH1002P11A2A
|
UPC:
3606485200415
$1,491.06
(No reviews yet) Write a Review
Condition:
New
Current Stock:
Description
This product is part of the Lexium 32 range, an offer of servo motors from 0.15kW to 11kW. The 10-pole servo motor features maximum mechanical speed of 6000RPM and keyed shaft end without holding brake. It is an equipped with a single-turn SinCos Hiperface® feedback with 1,31,072 points/turn speed feedback resolution. It is a servo motor with a rated supply voltage of 480V, a continuous stall current of 5.04A and a continuous power of 2.36W. The shaft dimensions are 19mm (diameter) x 40mm (length). It is furnished with rotatable right angled connectors for electrical connection. It is an IP54 rated product. The length of this product is 160.6mm and the centering collar dimensions are 3.5mm (depth) x 95mm (diameter) with 115mm mounting hole. It weighs 4.92kg. This range is compatible with Lexium 32 servo drives. This product is compatible with LXM32.D18N4 at 400V to 480V three phase. It supports 100mm international standard flange mount with a natural convection cooling system. Lexium 32 is a servo drive range provides drive and motor combination that has exactly the right power, performance and functionality. The Lexium 32 range of servo drives includes four servo drive models with power ratings from 0.15kW to 11kW and the servo motor ranges BMH and BSH series.
Additional Information
Continuous Stall Torque:
6.2 N.m LXM32.D18N4 6 A, 400 V, three phase || 6.2 N.m LXM32.D18N4 6 A, 480 V, three phase
Continuous Stall Current:
5.04 A
Back Emf Constant:
77 V/krpm 120 °C
Electrical Connection:
rotatable right-angled connectors
Continuous Power:
2.36 W
Warranty:
18 months
Maximum Radial Force Fr:
990 N 1000 rpm || 790 N 2000 rpm || 690 N 3000 rpm || 620 N 4000 rpm || 580 N 5000 rpm
Number Of Mounting Holes:
4
Phase:
three phase
Device Short Name:
BMH
Nominal Torque:
3.9 N.m LXM32.D18N4 6 A, 400 V, three phase || 3.9 N.m LXM32.D18N4 6 A, 480 V, three phase
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Range Compatibility:
Lexium 32
Maximum Axial Force Fa:
0.2 x Fr
Key Width:
30 mm
Mercury Free:
Yes
Maximum Permanent Current:
18.23 A
Environmental Disclosure:
ENVPEP111002EN
China Rohs Regulation:
X
Nominal Output Power:
1600 W LXM32.D18N4 6 A, 400 V, three phase || 1600 W LXM32.D18N4 6 A, 480 V, three phase
Peak Stall Torque:
18.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 18.4 N.m LXM32.D18N4 6 A, 480 V, three phase
Stator Inductance:
7.5 mH 20 °C
[Us] Rated Supply Voltage:
480 V
Motor Flange Size:
100 mm
Stator Electrical Time Constant:
5 ms 20 °C
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Shaft End:
keyed
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Sustainable Offer Status:
Green Premium product
Mounting Holes Diameter:
9 mm
Centring Collar Diameter:
95 mm
Holding Brake:
without
Maximum Mechanical Speed:
6000 rpm
Length:
160.6 mm
Shaft Length:
40 mm
Number Of Motor Stacks:
2
Centring Collar Depth:
3.5 mm
Number Of Motor Poles:
10
Circle Diameter Of The Mounting Holes:
115 mm
Product Or Component Type:
servo motor
Rohs Exemption Information:
Yes
Maximum Current Irms:
18 A LXM32.D18N4
Type Of Cooling:
natural convection
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Nominal Speed:
4000 rpm LXM32.D18N4 6 A, 400 V, three phase || 4000 rpm LXM32.D18N4 6 A, 480 V, three phase
Rotor Inertia:
6.28 kg.cm²
Circularity Profile:
N/A
Product Compatibility:
LXM32.D18N4 400...480 V three phase
Net Weight:
4.92 kg
Second Shaft:
without second shaft end
Mounting Support:
international standard flange
Speed Feedback Resolution:
131072 points/turn
Feedback Type:
single turn SinCos Hiperface
Torque Constant:
1.2 N.m/A 120 °C
Ip Degree Of Protection:
IP54 standard
Shaft Diameter:
19 mm
Stator Resistance:
1.51 Ohm 20 °C
Pvc Free:
Yes
Datasheet:
View
Related Products