Schneider Electric BMH1002P32A2A Motor 100Mm Iec 6,2Nm Ip65/67 2060W Key
SKU:
BMH1002P32A2A
UPC:
3606485195988
MPN:
Condition:
New
Type Of Cooling:
natural convection
Stator Electrical Time Constant:
5 ms 20 °C
Rohs Exemption Information:
Yes
Sustainable Offer Status:
Green Premium product
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Mercury Free:
Yes
Continuous Stall Current:
5.04 A
Nominal Output Power:
1600 W LXM32.D18N4 6 A, 400 V, three phase || 1600 W LXM32.D18N4 6 A, 480 V, three phase
Nominal Torque:
3.9 N.m LXM32.D18N4 6 A, 400 V, three phase || 3.9 N.m LXM32.D18N4 6 A, 480 V, three phase
Warranty:
18 months
China Rohs Regulation:
X
Maximum Current Irms:
18 A LXM32.D18N4
Circle Diameter Of The Mounting Holes:
115 mm
Product Or Component Type:
servo motor
Circularity Profile:
N/A
Product Compatibility:
LXM32.D18N4 400...480 V three phase
Number Of Motor Stacks:
2
Length:
160.6 mm
Stator Resistance:
1.51 Ohm 20 °C
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Second Shaft:
without second shaft end
Shaft Diameter:
19 mm
Key Width:
30 mm
Maximum Axial Force Fa:
0.2 x Fr
Holding Brake:
without
Feedback Type:
multiturn SinCos Hiperface
Motor Flange Size:
100 mm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
[Us] Rated Supply Voltage:
480 V
Ip Degree Of Protection:
IP65 standard || IP67 with IP67 kit
Number Of Mounting Holes:
4
Speed Feedback Resolution:
131072 points/turn x 4096 turns
Phase:
three phase
Shaft Length:
40 mm
Shaft End:
keyed
Mounting Support:
international standard flange
Device Short Name:
BMH
Torque Constant:
1.2 N.m/A 120 °C
Range Compatibility:
Lexium 32
Mounting Holes Diameter:
9 mm
Environmental Disclosure:
ENVPEP111002EN
Electrical Connection:
rotatable right-angled connectors
Centring Collar Depth:
3.5 mm
Maximum Radial Force Fr:
990 N 1000 rpm || 790 N 2000 rpm || 690 N 3000 rpm || 620 N 4000 rpm || 580 N 5000 rpm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Net Weight:
4.92 kg
Number Of Motor Poles:
10
Stator Inductance:
7.5 mH 20 °C
Peak Stall Torque:
18.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 18.4 N.m LXM32.D18N4 6 A, 480 V, three phase
Nominal Speed:
4000 rpm LXM32.D18N4 6 A, 400 V, three phase || 4000 rpm LXM32.D18N4 6 A, 480 V, three phase
Pvc Free:
Yes
Continuous Power:
2.36 W
Centring Collar Diameter:
95 mm
Maximum Mechanical Speed:
6000 rpm
Maximum Permanent Current:
18.23 A
Rotor Inertia:
6.28 kg.cm²
Back Emf Constant:
77 V/krpm 120 °C
Continuous Stall Torque:
6.2 N.m LXM32.D18N4 6 A, 400 V, three phase || 6.2 N.m LXM32.D18N4 6 A, 480 V, three phase
